Working 8-RELEASE laptop kernel config / diff -u
Laptop: Fujitsu Siemens Amilo L 7310 MCN
Diff -u 'GENERIC' 'LAPKERN'
Quote:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sun Jan 10 17:12:37 CET 2010
me@FreeBee.something.nl:/usr/obj/usr/src/sys/LAPKERN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor 1.50GHz (1492.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,AC PI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 536870912 (512 MB)
avail memory = 450084864 (429 MB)
ACPI APIC Table: <INSYDE APIC_000>
ioapic0: Changing APIC ID to 1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <INSYDE FACP_000> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
ACPI Warning: \\_SB_.PCI0.ALKD._CRS: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-1051
ACPI Error (uteval-0392): Return object type is incorrect [\\_SB_.PCI0.ALKD._CRS] (Node 0xc28f2220), AE_TYPE
ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-397
ACPI Error: No handler for Region [RAM_] (0xc28ef140) [EmbeddedControl] 20090521 evregion-430
ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382
ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc28ed080), AE_NOT_EXIST
ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc28ed080), AE_NOT_EXIST
ACPI Error: No handler for Region [RAM_] (0xc28ef140) [EmbeddedControl] 20090521 evregion-430
ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382
ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc28ed080), AE_NOT_EXIST
ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc28ed080), AE_NOT_EXIST
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1> port 0x62,0x66 on acpi0
ACPI Error (uteval-0392): Return object type is incorrect [\\_SB_.PCI0.ALKD._CRS] (Node 0xc28f2220), AE_TYPE
ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-397
pci_link11: Warning: possible resource 1 will be lost during _SRS
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfff80000-0xffffffff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA PM800/PN800/PM880/PN880 host to PCI bridge> on hostb0
agp0: aperture size is 128M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0x90000000-0x93ffffff,0xc0000000-0xc0ffffff irq 16 at device 0.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
ath0: <Atheros 2413> at device 6.0 on pci0
ath0: [ITHREAD]
ath0: AR2413 mac 7.8 RF2413 phy 4.5
cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 9.0 on pci0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
uhci0: <VIA 83C572 USB controller> port 0x1200-0x121f irq 21 at device 16.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x8030
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0x1220-0x123f irq 21 at device 16.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x8030
usbus1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0x1240-0x125f irq 21 at device 16.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x8030
usbus2: <VIA 83C572 USB controller> on uhci2
ehci0: <VIA VT6202 USB 2.0 controller> irq 21 at device 16.3 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <VIA VT6202 USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe200-0xe2ff mem 0xd0000000-0xd00000ff irq 23 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x74
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:40:d0:87:cb:ce
vr0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x75 irq 8 on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xe0000-0xe1fff,0xe6000-0xe6fff,0xeb000-0xecfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1492688077 Hz quality 800
Timecounters tick every 1.000 msec
WARNING: apm_saver module requires apm enabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ad0: 57231MB <FUJITSU MHV2060AT 000000A0> at ata0-master UDMA100
acd0: DVDR <HL-DT-ST DVD-RW GWA-4082N/CW02> at ata1-master UDMA33
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
ugen0.2: <vendor 0x1241> at usbus0
ums0: <vendor 0x1241 product 0x1111, class 0/0, rev 1.10/4.30, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
wlan0: Ethernet address: 00:...
wlan0: link state changed to UP
ugen3.2: <USB Mass Storage> at usbus3
umass0: <USB Mass Storage USB Mass Storage, class 0/0, rev 2.00/0.95, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB-DISK FREEDIK-LWFORMAT 3.01> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 63MB (130144 512 byte sectors: 64H 32S/T 63C)
GEOM: da0: partition 1 does not start on a track boundary.
ugen3.2: <USB Mass Storage> at usbus3 (disconnected)
umass0: at uhub3, port 3, addr 2 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
ugen3.2: <USB Mass Storage> at usbus3
umass0: <USB Mass Storage USB Mass Storage, class 0/0, rev 2.00/0.95, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB-DISK FREEDIK-LWFORMAT 3.01> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 63MB (130144 512 byte sectors: 64H 32S/T 63C)
GEOM: da0: partition 1 does not start on a track boundary.
ugen3.2: <USB Mass Storage> at usbus3 (disconnected)
umass0: at uhub3, port 3, addr 2 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
ugen3.2: <USB Mass Storage> at usbus3
umass0: <USB Mass Storage USB Mass Storage, class 0/0, rev 2.00/0.95, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB-DISK FREEDIK-LWFORMAT 3.01> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 63MB (130144 512 byte sectors: 64H 32S/T 63C)
GEOM: da0: partition 1 does not start on a track boundary.
|
|