Okay, so I just rebooted with the /etc/hostname.tun0 file in place...
ifconfig:
Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:xx:xx:xx:xx:86
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::2xx:xxff:fexx:xx86%nfe0 prefixlen 64 scopeid 0x1
inet 192.168.1.4 netmask 0xffffff00 broadcast 192.168.1.255
enc0: flags=0<>
priority: 0
groups: enc
status: active
tun0: flags=11<UP,POINTOPOINT> mtu 1500
priority: 0
groups: tun
status: down
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
priority: 0
groups: pflog
routing table:
Code:
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.1.1 UGS 9 385 - 8 nfe0
127/8 127.0.0.1 UGRS 0 0 33200 8 lo0
127.0.0.1 127.0.0.1 UH 17 452 33200 4 lo0
192.168.1/24 link#1 UC 1 0 - 4 nfe0
192.168.1.1 00:xx:xx:xx:xx:8c UHLc 1 20 - 4 nfe0
192.168.1.4 127.0.0.1 UGHS 0 0 33200 8 lo0
224/4 127.0.0.1 URS 0 0 33200 8 lo0
It didn't start tun0 at all??? Same as before when I rebooted...
And of course as usual the VPN connects but nothing...