View Single Post
  #1   (View Single Post)  
Old 5th September 2008
IIMarckus IIMarckus is offline
Port Guard
 
Join Date: Aug 2008
Posts: 13
Default Installation problems on X24 laptop

Hey guys. After finding out that OpenBSD does apparently support WPA, I decided to put it on my laptop via an external hard drive. I booted from CD, and the installation seemed to go fine until immediately after disklabels.

HD in question is external through USB, so it was sd0 when I chose disks during the installation. These are the partitions I chose to make:
/: 150m (a)
swap: 1300m (b)
/tmp: 120m (d)
/var: 80m (e)
/usr: 30g (f)
/home: 20g (g)

There was also an existing 10 gig NTFS partition on i, which I did not overwrite.

Code:
The next step *DESTROYS* all existing data on these partitions!
Are you really sure that you're ready to proceed? [no] y
newfs: reduced number of fragments per cylinder group from 20080 to 19992 to enlarge last cylinder group
/dev/rsd0a: 156.9MB in 321300 sectors of 512 bytes
5 cylinder groups of 39.05MB, 2499 blocks, 5120 inodes each
newfs: reduced number of fragments per cylinder group from 16064 to 15992 to enlarge last cylinder group
/dev/rsd0d: 125.5MB in 257040 sectors of 512 bytes
5 cylinder groups of 31.23MB, 1999 blocks, 4096 inodes each
newfs: reduced number of fragments per cylinder group from 11040 to 10992 to enlarge last cylinder group
/dev/rsd0e: 86.3MB in 176712 sectors of 512 bytes
5 cylinder groups of 21.47MB, 1374 blocks, 2816 inodes each
umass0: BBB bulk-out stall clear failed, TIMEOUT
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB bulk-out stall clear failed, TIMEOUT
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
At this point it pretty much kept repeating, adding a couple lines every minute or so that always said the same thing, so I hit ^C and got back to the root prompt. Does anyone know what caused this problem?
Reply With Quote