Hi all,
It's been two weeks now that I successfully moved my home little mail/sftp server on OpenBSD. I'm more than happy with it and I would like trying to use it as a desktop, but I have a few problem that I could not solve.
I should mention that I tried xfce4 only because this is what I've been using with linux for years, but I'm more than open to test other solutions should they solve my problems.
- Video
My laptop (lenovo R61i) has a nvidia card, unfortunately ! Moving windows is quite slow, resizing them litterally takes seconds. 'Xorg -configure' gave me this :
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card1"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I either commented the corresponding "nv" or "vesa" device code blocks, the vesa is slightly better but it's still very slow, and I can't even read a video with vlc (error is no XVideo adapter found, but I can see the first frame of the video...still this might be an unrelated problem but I didn't find anything usefull on the net. I also changed the video output in vlc config to all the available options, without success)
Did I miss something or I can't expect more with this video card?
-Mounting
I could mount fat32 USB keys but not ext3/ext4 :
Code:
# dmesg|tail
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (3e61c9a25d3c4b5e.a) swap on wd0b dump on wd0b
umass0 at uhub0 port 3 configuration 1 interface 0 "SKYMEDI USB Drive" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <SKYMEDI, USB Drive, > SCSI2 0/direct removable
sd0: 3824MB, 512 bytes/sector, 7831552 sectors
# disklabel sd0
type: SCSI
disk: SCSI disk
label: USB Drive
duid: 0000000000000000
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 487
total sectors: 7831552
boundstart: 0
boundend: 7831552
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 7831552 0 unused
i: 7829504 2048 ext2fs
# /sbin/mount_ext2fs /dev/rsd0i /home/me/Desktop/moutingFolder
mount_ext2fs: /dev/rsd0i on /home/me/Desktop/moutingFolder: Block device required
-Cryptography
I have a LUKS encrypted hard drive, but from what I understand the source code is for linux only, so compiling it on openbsd won't work as far as I understand...
Well, that's about it, comments/advices appreciated !