View Single Post
  #1   (View Single Post)  
Old 9th October 2010
marcolino's Avatar
marcolino marcolino is offline
Real Name: Mark
Custom Title Maker
 
Join Date: May 2008
Location: At the Mountains of Madness
Posts: 128
Default pciide0:0:0 not ready

Hi all,

I'm trying to install OpenBSD 4.7 on a PC that has an Abit NF-7S motherboard. The NF-7S has an onboard Silicon Industries SiI 3112A SATA controller. The issue is that the hard drive doesn't seem to initialize. Here is the output:
Code:
entry point at 0x200120

Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.7 (RAMDISK_CD) #353: Wed Mar 17 21:02:53 MDT 2010
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.84 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 1073250304 (1023MB)
avail mem = 1033007104 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/03, BIOS32 rev. 0 @ 0xfb3f0, SMBIOS rev. 2.2 @ 0xf0800 (37 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 12/01/2003
bios0: http://www.abit.com.tw/ NF7-S/NF7 (nVidia-nForce2)
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11 12 14 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x4800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa3
"NVIDIA nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa3: irq 11, version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa3: irq 15, version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa3: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address 00:50:80:fb:17:17
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
"NVIDIA nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
"NVIDIA nForce2 AC97" rev 0xa1 at pci0 dev 6 function 0 not configured
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
pciide0 at pci1 dev 11 function 0 "CMD Technology SiI3112 SATA" rev 0x02: DM
pciide0: using irq 15 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y200M0>
wd0: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HP, DVD Writer 1070r, RH22> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using BIOS timings, Ultra-DMA mode 5
pciide1 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 ignored (disabled)
pciide1: channel 1 ignored (disabled)
"NVIDIA nForce2 FireWire" rev 0xa3 at pci0 dev 13 function 0 not configured
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce FX 5900" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
biomask ffed netmask ffed ttymask ffff
rd0: fixed, 3800 blocks
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
softraid0 at root
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
pciide0 channel 0: reset failed for drive 0
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
pciide0 channel 0: reset failed for drive 0
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
There seem to be several items not configured, but I'm not sure if they are relevant. I'm also not sure where to go from here. Any ideas?
__________________
That's nothing a couple o' pints wouldn't fix.
Reply With Quote