View Single Post
  #8   (View Single Post)  
Old 27th July 2013
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Default

Thanks shep , jggimi , ocicat !!!! Sorry for being late for an output.
Code:
Do you mean that X -configure does not generate xorg.conf.new in /root or that when you startx using the newly generated file that your system fails?
The generated xorg.conf.new at /root is but an empty file (0B)
startx actually works but with bad shape (on current) and this applies to iBook G3 and G4 which is now running current too... 'startx' doesn't freeze OS but 'X -configure' does .. the -current X screen has now a 1.8 cm height line at the bottom. it's not a big problem but I want to ensure an akways working X as I go using current and that's why I asked wether it's possible to have previous Xorg settings working on newer version of Xorg that's been installed.I remember Reinhold's help (thanks Reinhold !) providing a working xorg.conf for iMac g3 I always face this issue : now X is working .. tomorrow not working .. how can I ensure I have it always functional while still running current ?


Am I wrong thinking an old working xorg.conf file to always be used (regardlss of X version?) is a safety measure not to lose X after upgrades ?

Quote:
Xorg has an "Alt-Ctrl-Backspace" sequence which will stop X on other architectures.
for iBooks g3 g4 and iMacs I'm afraid I don't know any alternative combination neither for killing X nor for starting virtual screens ..


Ibook G4 dmesg (same issue)
Code:
[ using 500484 bytes of bsd ELF symbol table ]
console out [ATY,Via_A]console in [keyboard] , using ADB
using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.4 (GENERIC) #26: Sun Jul 21 21:25:58 MDT 2013
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1342177280 (1280MB)
avail mem = 1287766016 (1228MB)
mainbus0 at root: model PowerBook6,5
cpu0 at mainbus0: 7447A (Revision 0x101): 1066 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: no EEPROM found
spdmem1 at mem0: 1GB DDR SDRAM non-parity PC2700CL2.5
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
adt0 at iic0 addr 0xae: adt7467 rev 0x71
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
appleagp0 at pchb0
agp0 at appleagp0: aperture at 0x0, size 0x10000000
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address 00:0d:93:ee:95:91
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9: irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
dfs0 at macgpio0 offset 0x6b: speeds: 1066, 533 MHz
"gpio4" at macgpio0 offset 0x1e not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"gpio11" at macgpio0 offset 0x75 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 3 targets
apm0 at adb0: battery flags 0x5, 0% charged
piic0 at adb0
iic1 at piic0
akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8123, CA0T> ATAPI 5/cdrom removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
audio0 at snapper0
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci2: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci3: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci4: USB revision 1.0
uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <HTS421260H9AT00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:b3:df:b0
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a (5bf2d6abe0cbee49.a) swap on wd0b dump on wd0b
Xorg.0.log for -current G4 :
Code:
[    31.686] (--) no aperture driver access: only wsfb driver useable
[    31.687] (--) Using wscons driver on /dev/ttyC1 in pcvt compatibility mode (version 3.32)
[    31.897] 
X.Org X Server 1.14.1
Release Date: 2013-04-17
[    31.897] X Protocol Version 11, Revision 0
[    31.897] Build Operating System: OpenBSD 5.4 macppc 
[    31.898] Current Operating System: OpenBSD muspelheimr.my.domain 5.4 GENERIC#26 macppc
[    31.899] Build Date: 22 July 2013  10:06:16AM
[    31.899]  
[    31.899] Current version of pixman: 0.30.0
[    31.899] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    31.899] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.900] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 13 11:27:28 2013
[    32.007] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[    32.044] (==) No Layout section.  Using the first Screen section.
[    32.044] (==) No screen section available. Using defaults.
[    32.044] (**) |-->Screen "Default Screen Section" (0)
[    32.044] (**) |   |-->Monitor "<default monitor>"
[    32.061] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    32.065] (==) Disabling SIGIO handlers for input devices
[    32.065] (==) Automatically adding devices
[    32.065] (==) Automatically enabling devices
[    32.065] (==) Not automatically adding GPU devices
[    32.289] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[    32.290] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    32.290] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    32.302] (II) Loader magic: 0x1a1b010
[    32.303] (II) Module ABI versions:
[    32.303] 	X.Org ANSI C Emulation: 0.4
[    32.303] 	X.Org Video Driver: 14.1
[    32.303] 	X.Org XInput driver : 19.1
[    32.303] 	X.Org Server Extension : 7.0
[    32.310] Initializing built-in extension Generic Event Extension
[    32.310] Initializing built-in extension SHAPE
[    32.311] Initializing built-in extension MIT-SHM
[    32.311] Initializing built-in extension XInputExtension
[    32.311] Initializing built-in extension XTEST
[    32.311] Initializing built-in extension BIG-REQUESTS
[    32.311] Initializing built-in extension SYNC
[    32.311] Initializing built-in extension XKEYBOARD
[    32.311] Initializing built-in extension XC-MISC
[    32.311] Initializing built-in extension SECURITY
[    32.311] Initializing built-in extension XINERAMA
[    32.311] Initializing built-in extension XFIXES
[    32.311] Initializing built-in extension RENDER
[    32.311] Initializing built-in extension RANDR
[    32.311] Initializing built-in extension COMPOSITE
[    32.311] Initializing built-in extension DAMAGE
[    32.312] Initializing built-in extension MIT-SCREEN-SAVER
[    32.312] Initializing built-in extension DOUBLE-BUFFER
[    32.312] Initializing built-in extension RECORD
[    32.312] Initializing built-in extension DPMS
[    32.312] Initializing built-in extension X-Resource
[    32.312] Initializing built-in extension XVideo
[    32.312] Initializing built-in extension XVideo-MotionCompensation
[    32.313] Initializing built-in extension XFree86-VidModeExtension
[    32.313] Initializing built-in extension XFree86-DGA
[    32.313] Initializing built-in extension XFree86-DRI
[    32.313] Initializing built-in extension DRI2
[    32.313] (II) LoadModule: "glx"
[    32.358] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    32.400] (II) Module glx: vendor="X.Org Foundation"
[    32.400] 	compiled for 1.14.1, module version = 1.0.0
[    32.400] 	ABI class: X.Org Server Extension, version 7.0
[    32.400] (==) AIGLX enabled
[    32.401] Loading extension GLX
[    32.401] (==) Matched wsfb as autoconfigured driver 0
[    32.401] (==) Assigned the driver to the xf86ConfigLayout
[    32.401] (II) LoadModule: "wsfb"
[    32.403] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[    32.423] (II) Module wsfb: vendor="X.Org Foundation"
[    32.424] 	compiled for 1.14.1, module version = 0.4.1
[    32.424] 	ABI class: X.Org Video Driver, version 14.1
[    32.424] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[    32.424] (WW) Falling back to old probe method for wsfb
[    32.434] (II) wsfb(0): using default device
[    32.437] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    32.437] (II) wsfb(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 8/8
[    32.437] (==) wsfb(0): Depth 8, (==) framebuffer bpp 8
[    32.437] (==) wsfb(0): Default visual is PseudoColor
[    32.441] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
[    32.441] (II) wsfb(0): Vidmem: 768k
[    32.441] (==) wsfb(0): DPI set to (96, 96)
[    32.441] (**) wsfb(0): Using "Shadow Framebuffer"
[    32.441] (II) Loading sub module "shadow"
[    32.441] (II) LoadModule: "shadow"
[    32.459] (II) Loading /usr/X11R6/lib/modules/libshadow.so
[    32.480] (II) Module shadow: vendor="X.Org Foundation"
[    32.480] 	compiled for 1.14.1, module version = 1.1.0
[    32.480] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.480] (II) Loading sub module "fb"
[    32.480] (II) LoadModule: "fb"
[    32.483] (II) Loading /usr/X11R6/lib/modules/libfb.so
[    32.502] (II) Module fb: vendor="X.Org Foundation"
[    32.502] 	compiled for 1.14.1, module version = 1.0.0
[    32.502] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.573] (==) wsfb(0): Backing store disabled
[    32.610] (==) RandR enabled
[    33.349] (II) AIGLX: Screen 0 is not DRI2 capable
[    33.350] (II) AIGLX: Screen 0 is not DRI capable
[    33.351] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/swrastg_dri.so failed (File not found)
[    33.720] (II) AIGLX: Loaded and initialized swrast
[    33.720] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    35.643] (II) config/wscons: checking input device /dev/wskbd
[    35.643] (II) wskbd: using layout us
[    35.643] (II) wskbd: using model macintosh
[    35.644] (II) LoadModule: "kbd"
[    35.647] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    35.674] (II) Module kbd: vendor="X.Org Foundation"
[    35.674] 	compiled for 1.14.1, module version = 1.7.0
[    35.674] 	Module class: X.Org XInput Driver
[    35.674] 	ABI class: X.Org XInput driver, version 19.1
[    35.674] (II) Using input driver 'kbd' for '/dev/wskbd'
[    35.674] (**) /dev/wskbd: always reports core events
[    35.674] (**) /dev/wskbd: always reports core events
[    35.675] (**) Option "Protocol" "standard"
[    35.675] (**) Option "XkbRules" "base"
[    35.675] (**) Option "XkbModel" "macintosh"
[    35.675] (**) Option "XkbLayout" "us"
[    35.675] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[    35.946] (II) config/wscons: checking input device /dev/wsmouse
[    35.947] (II) LoadModule: "ws"
[    35.950] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    36.000] (II) Module ws: vendor="X.Org Foundation"
[    36.000] 	compiled for 1.14.1, module version = 1.3.0
[    36.000] 	Module class: X.Org XInput Driver
[    36.000] 	ABI class: X.Org XInput driver, version 19.1
[    36.001] (II) Using input driver 'ws' for '/dev/wsmouse'
[    36.001] (**) /dev/wsmouse: always reports core events
[    36.001] (II) ws: /dev/wsmouse: debuglevel 0
[    36.001] (**) Option "Device" "/dev/wsmouse"
[    36.001] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    36.001] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    36.001] (**) ws: /dev/wsmouse: associated screen: 0
[    36.002] (II) ws: /dev/wsmouse: minimum x position: 0
[    36.002] (II) ws: /dev/wsmouse: maximum x position: 1023
[    36.002] (II) ws: /dev/wsmouse: minimum y position: 0
[    36.002] (II) ws: /dev/wsmouse: maximum y position: 767
[    36.002] (==) ws: /dev/wsmouse: Buttons: 7
[    36.002] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    36.003] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[    36.004] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    36.004] (**) /dev/wsmouse: (accel) acceleration profile 0
[    36.004] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    36.004] (**) /dev/wsmouse: (accel) acceleration threshold: 4
Xorg.0.log.old
Code:
[   536.138] (--) no aperture driver access: only wsfb driver useable
[   536.139] (--) Using wscons driver on /dev/ttyC1 in pcvt compatibility mode (version 3.32)
[   536.176] 
X.Org X Server 1.14.1
Release Date: 2013-04-17
[   536.177] X Protocol Version 11, Revision 0
[   536.177] Build Operating System: OpenBSD 5.4 macppc 
[   536.177] Current Operating System: OpenBSD muspelheimr.my.domain 5.4 GENERIC#26 macppc
[   536.178] Build Date: 22 July 2013  10:06:16AM
[   536.178]  
[   536.178] Current version of pixman: 0.30.0
[   536.178] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   536.178] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   536.179] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 13 11:21:36 2013
[   536.181] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[   536.182] (==) No Layout section.  Using the first Screen section.
[   536.182] (==) No screen section available. Using defaults.
[   536.182] (**) |-->Screen "Default Screen Section" (0)
[   536.182] (**) |   |-->Monitor "<default monitor>"
[   536.183] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   536.184] (==) Disabling SIGIO handlers for input devices
[   536.184] (==) Automatically adding devices
[   536.184] (==) Automatically enabling devices
[   536.184] (==) Not automatically adding GPU devices
[   536.184] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[   536.185] (==) ModulePath set to "/usr/X11R6/lib/modules"
[   536.185] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[   536.185] (II) Loader magic: 0x1a1b010
[   536.185] (II) Module ABI versions:
[   536.185] 	X.Org ANSI C Emulation: 0.4
[   536.185] 	X.Org Video Driver: 14.1
[   536.185] 	X.Org XInput driver : 19.1
[   536.185] 	X.Org Server Extension : 7.0
[   536.186] Initializing built-in extension Generic Event Extension
[   536.186] Initializing built-in extension SHAPE
[   536.186] Initializing built-in extension MIT-SHM
[   536.186] Initializing built-in extension XInputExtension
[   536.186] Initializing built-in extension XTEST
[   536.186] Initializing built-in extension BIG-REQUESTS
[   536.186] Initializing built-in extension SYNC
[   536.186] Initializing built-in extension XKEYBOARD
[   536.186] Initializing built-in extension XC-MISC
[   536.186] Initializing built-in extension SECURITY
[   536.186] Initializing built-in extension XINERAMA
[   536.186] Initializing built-in extension XFIXES
[   536.186] Initializing built-in extension RENDER
[   536.186] Initializing built-in extension RANDR
[   536.187] Initializing built-in extension COMPOSITE
[   536.187] Initializing built-in extension DAMAGE
[   536.187] Initializing built-in extension MIT-SCREEN-SAVER
[   536.187] Initializing built-in extension DOUBLE-BUFFER
[   536.187] Initializing built-in extension RECORD
[   536.187] Initializing built-in extension DPMS
[   536.187] Initializing built-in extension X-Resource
[   536.187] Initializing built-in extension XVideo
[   536.188] Initializing built-in extension XVideo-MotionCompensation
[   536.188] Initializing built-in extension XFree86-VidModeExtension
[   536.188] Initializing built-in extension XFree86-DGA
[   536.188] Initializing built-in extension XFree86-DRI
[   536.188] Initializing built-in extension DRI2
[   536.188] (II) LoadModule: "glx"
[   536.191] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[   536.193] (II) Module glx: vendor="X.Org Foundation"
[   536.193] 	compiled for 1.14.1, module version = 1.0.0
[   536.193] 	ABI class: X.Org Server Extension, version 7.0
[   536.193] (==) AIGLX enabled
[   536.193] Loading extension GLX
[   536.194] (==) Matched wsfb as autoconfigured driver 0
[   536.194] (==) Assigned the driver to the xf86ConfigLayout
[   536.194] (II) LoadModule: "wsfb"
[   536.195] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[   536.196] (II) Module wsfb: vendor="X.Org Foundation"
[   536.196] 	compiled for 1.14.1, module version = 0.4.1
[   536.196] 	ABI class: X.Org Video Driver, version 14.1
[   536.197] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[   536.197] (WW) Falling back to old probe method for wsfb
[   536.199] (II) wsfb(0): using default device
[   536.199] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   536.200] (II) wsfb(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 8/8
[   536.200] (==) wsfb(0): Depth 8, (==) framebuffer bpp 8
[   536.200] (==) wsfb(0): Default visual is PseudoColor
[   536.200] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
[   536.200] (II) wsfb(0): Vidmem: 768k
[   536.201] (==) wsfb(0): DPI set to (96, 96)
[   536.201] (**) wsfb(0): Using "Shadow Framebuffer"
[   536.201] (II) Loading sub module "shadow"
[   536.201] (II) LoadModule: "shadow"
[   536.204] (II) Loading /usr/X11R6/lib/modules/libshadow.so
[   536.206] (II) Module shadow: vendor="X.Org Foundation"
[   536.206] 	compiled for 1.14.1, module version = 1.1.0
[   536.206] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   536.206] (II) Loading sub module "fb"
[   536.206] (II) LoadModule: "fb"
[   536.209] (II) Loading /usr/X11R6/lib/modules/libfb.so
[   536.212] (II) Module fb: vendor="X.Org Foundation"
[   536.212] 	compiled for 1.14.1, module version = 1.0.0
[   536.212] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   536.222] (==) wsfb(0): Backing store disabled
[   536.223] (==) RandR enabled
[   536.912] (II) AIGLX: Screen 0 is not DRI2 capable
[   536.913] (II) AIGLX: Screen 0 is not DRI capable
[   536.913] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/swrastg_dri.so failed (File not found)
[   536.955] (II) AIGLX: Loaded and initialized swrast
[   536.955] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   537.997] (II) config/wscons: checking input device /dev/wskbd
[   537.997] (II) wskbd: using layout us
[   537.997] (II) wskbd: using model macintosh
[   537.997] (II) LoadModule: "kbd"
[   538.000] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[   538.002] (II) Module kbd: vendor="X.Org Foundation"
[   538.002] 	compiled for 1.14.1, module version = 1.7.0
[   538.002] 	Module class: X.Org XInput Driver
[   538.002] 	ABI class: X.Org XInput driver, version 19.1
[   538.002] (II) Using input driver 'kbd' for '/dev/wskbd'
[   538.002] (**) /dev/wskbd: always reports core events
[   538.002] (**) /dev/wskbd: always reports core events
[   538.002] (**) Option "Protocol" "standard"
[   538.003] (**) Option "XkbRules" "base"
[   538.003] (**) Option "XkbModel" "macintosh"
[   538.003] (**) Option "XkbLayout" "us"
[   538.003] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[   538.177] (II) config/wscons: checking input device /dev/wsmouse
[   538.177] (II) LoadModule: "ws"
[   538.180] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[   538.182] (II) Module ws: vendor="X.Org Foundation"
[   538.182] 	compiled for 1.14.1, module version = 1.3.0
[   538.182] 	Module class: X.Org XInput Driver
[   538.182] 	ABI class: X.Org XInput driver, version 19.1
[   538.182] (II) Using input driver 'ws' for '/dev/wsmouse'
[   538.182] (**) /dev/wsmouse: always reports core events
[   538.182] (II) ws: /dev/wsmouse: debuglevel 0
[   538.182] (**) Option "Device" "/dev/wsmouse"
[   538.183] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[   538.183] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[   538.183] (**) ws: /dev/wsmouse: associated screen: 0
[   538.183] (II) ws: /dev/wsmouse: minimum x position: 0
[   538.183] (II) ws: /dev/wsmouse: maximum x position: 1023
[   538.183] (II) ws: /dev/wsmouse: minimum y position: 0
[   538.183] (II) ws: /dev/wsmouse: maximum y position: 767
[   538.183] (==) ws: /dev/wsmouse: Buttons: 7
[   538.184] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[   538.184] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[   538.185] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[   538.185] (**) /dev/wsmouse: (accel) acceleration profile 0
[   538.185] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[   538.185] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[   850.428] (II) UnloadModule: "ws"
[   850.429] (II) UnloadModule: "kbd"
[   850.710] Server terminated successfully (0). Closing log file.
Reply With Quote