Thread: Wifi trouble - worked during install, never again
View Single Post
  #3   (View Single Post)  
Old 28th December 2009
RadioKJ RadioKJ is offline
New User
  
Join Date: Dec 2009
Posts: 8
Default
ifconfig:
Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33152
	priority: 0
	groups: lo
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:1f:e2:3c:5e:e3
	priority: 0
	media: Ethernet autoselect (none)
	status: no carrier
enc0: flags=0<> mtu 1536
	priority: 0
run0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:22:b0:0d:5d:82
	priority: 4
	groups: wlan
	media: IEEE802.11 autoselect (DS1 mode 11g)
	status: active
	ieee80211: nwid VERIFIED chan 11 bssid 00:14:bf:9e:8a:7e 46dB nwkey 0xVERIFIED
	inet6 fe80::222:b0ff:fe0d:5d82%run0 prefixlen 64 scopeid 0x4
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33152
	priority: 0
	groups: pflog
dmesg:
Code:
OpenBSD 4.6 (GENERIC.MP) #81: Thu Jul  9 21:26:19 MDT 2009
    deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 1877540864 (1790MB)
avail mem = 1809547264 (1725MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f400 (30 entries)
bios0: vendor American Megatrends Inc. version "R03-B0" date 05/07/2008
bios0: Acer Aspire M1201
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET ASF! AWMI SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) SBAZ(S4) UAR1(S3) UAR2(S3) PS2K(S3) PS2M(S3) P0PC(S4) UHC1(S3) UHC2(S3) UHC3(S3) USB4(S3) UHC5(S3) UHC6(S3) UHC7(S3) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2299.40 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2299.12 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus 2 (PCE4)
acpiprt5 at acpi0: bus 3 (PCE5)
acpiprt6 at acpi0: bus 4 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus 5 (P0PC)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature 90 degC
acpibtn0 at acpi0: PWRB
cpu0: PowerNow! K8 2299 MHz: speeds: 2300 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS740 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon 2100" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 4 function 0 vendor "ATI", unknown product 0x7914 rev 0x00
pci2 at ppb1 bus 2
vendor "Conexant", unknown product 0x8880 (class multimedia subclass video, rev 0x0f) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00
pci3 at ppb2 bus 3
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 17 (irq 11)
msk0 at mskc0 port A: address 00:1f:e2:3c:5e:e3
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb3 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00
pci4 at ppb3 bus 4
"JMicron FireWire" rev 0x00 at pci4 dev 0 function 0 not configured
pciide0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 22 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD3200AAJS-22B4A0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GH15F, EG00> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq 11), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq 11), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16 (irq 11)
azalia0: codecs: Realtek ALC888
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci5 at ppb4 bus 5
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev BH-G2
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0xe80
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
run0 at uhub0 port 6 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT2860 (rev 0x0103), RF RT2820 (MIMO 2T2R), address 00:22:b0:0d:5d:82
umass0 at uhub2 port 1 configuration 1 interface 0 " USB Reader" rev 1.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable
sd3: drive offline
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Plus More Enterprise LTD. USB-compliant keyboard" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "Plus More Enterprise LTD. USB-compliant keyboard" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1, 3 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
ums0 at uhidev1 reportid 3: 0 button, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Last edited by Carpetsmoker; 28th December 2009 at 03:31 AM. Reason: s/quote/code/
Reply With Quote