Sorry for being messy! i did not know the differences between the two tags.
i've been using the same machine (well, the same hard disk on various machines to be honest
) since 2.9, and these network settings in particular for at least 2 years... and they never gave me any problem. damn!
so here again the infos with the right tagging
Code:
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:02:a5:dd:5b:82
priority: 0
groups: egress
media: Ethernet autoselect (10baseT half-duplex)
status: active
inet6 fe80::202:a5ff:fedd:5b82%fxp0 prefixlen 64 scopeid 0x2
inet 192.168.1.69 netmask 0xffffff00 broadcast 192.168.1.255
and the routing table again
Code:
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.1.254 UGS 3 9539 - 8 fxp0
127/8 127.0.0.1 UGRS 0 0 33200 8 lo0
127.0.0.1 127.0.0.1 UH 0 0 33200 4 lo0
192.168.1/24 link#2 UC 4 0 - 4 fxp0
192.168.1.2 00:12:79:8f:ca:b0 UHLc 0 1725 - 4 fxp0
192.168.1.105 00:24:d6:46:42:72 UHLc 0 6 - 4 fxp0
192.168.1.198 00:23:6c:8d:a1:4f UHLc 2 286 - 4 fxp0
192.168.1.254 00:17:c2:92:b7:0c UHLc 1 0 - 4 fxp0
224/4 127.0.0.1 URS 0 0 33200 8 lo0