View Single Post
Old 19th June 2010
Lexus45 Lexus45 is offline
Port Guard
 
Join Date: May 2010
Location: Kurgan, Russia
Posts: 39
Default

One guy from #netbsd channel at Freenode IRC-server gave an advice to publish the Linux dmesg output.

So, that's it

Code:
Linux version 2.6.27.27 (root@darkstar) (gcc version 4.2.4) #1 SMP Wed Jul 22 07:27:34 AKDT 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ce34000 (usable)
 BIOS-e820: 000000001ce34000 - 000000001d235000 (ACPI NVS)
 BIOS-e820: 000000001d235000 - 000000001ddf2000 (usable)
 BIOS-e820: 000000001ddf2000 - 000000001ddf4000 (reserved)
 BIOS-e820: 000000001ddf4000 - 000000001de79000 (usable)
 BIOS-e820: 000000001de79000 - 000000001def7000 (ACPI NVS)
 BIOS-e820: 000000001def7000 - 000000001def8000 (usable)
 BIOS-e820: 000000001def8000 - 000000001deff000 (ACPI data)
 BIOS-e820: 000000001deff000 - 000000001df00000 (usable)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x1df00 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1df00000 @ 7000-d000
RAMDISK: 1cbaf000 - 1ce33fea
ACPI: RSDP 000FE020, 0014 (r0 INTEL )
ACPI: RSDT 1DEFE038, 002C (r1 INTEL  DG965CO        86       1000013)
ACPI: FACP 1DEFD000, 0074 (r1 INTEL  DG965CO        86 MSFT  1000013)
ACPI: DSDT 1DEF9000, 30F6 (r1 INTEL  DG965CO        86 MSFT  1000013)
ACPI: FACS 1DEBC000, 0040
ACPI: APIC 1DEF8000, 006C (r1 INTEL  DG965CO        86 MSFT  1000013)
0MB HIGHMEM available.
479MB LOWMEM available.
  mapped low ram: 0 - 1df00000
  low ram: 00000000 - 1df00000
  bootmap 00002000 - 00005be0
(9 early reservations) ==> bootmem [0000000000 - 001df00000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000976b10]    TEXT DATA BSS ==> [0000100000 - 0000976b10]
  #4 [001cbaf000 - 001ce33fea]          RAMDISK ==> [001cbaf000 - 001ce33fea]
  #5 [0000977000 - 000097b000]    INIT_PG_TABLE ==> [0000977000 - 000097b000]
  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
found SMP MP-table at [c00fe200] 000fe200
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001df00
  HighMem  0x0001df00 -> 0x0001df00
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001ce34
    0: 0x0001d235 -> 0x0001ddf2
    0: 0x0001ddf4 -> 0x0001de79
    0: 0x0001def7 -> 0x0001def8
    0: 0x0001deff -> 0x0001df00
On node 0 totalpages: 121367
free_area_init_node: node 0, pgdat c0881280, node_mem_map c1000000
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 116442 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 3 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000001ce34000 - 000000001d235000
PM: Registered nosave memory: 000000001ddf2000 - 000000001ddf4000
PM: Registered nosave memory: 000000001de79000 - 000000001def7000
PM: Registered nosave memory: 000000001def8000 - 000000001deff000
Allocating PCI resources starting at 20000000 (gap: 1df00000:e2080000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 120409
Kernel command line: auto BOOT_IMAGE=Slax rw root=100 ramdisk_size=6666 changes=slaxchanges
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 1200.039 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 469352k/490496k available (5828k kernel code, 15772k reserved, 1947k data, 388k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
    lowmem  : 0xc0000000 - 0xddf00000   ( 479 MB)
      .init : 0xc08a5000 - 0xc0906000   ( 388 kB)
      .data : 0xc06b1147 - 0xc0898118   (1947 kB)
      .text : 0xc0100000 - 0xc06b1147   (5828 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2400.07 BogoMIPS (lpj=4800156)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU          220  @ 1.20GHz stepping 01
Brought up 1 CPUs
Total of 1 processors activated (2400.07 BogoMIPS).
net_namespace: 768 bytes
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  4350.000 MB/sec
xor: using function: pIII_sse (4350.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [28000000, 29ffffff]
PCI: 0000:00:02.5 reg 20 io port: [2100, 210f]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [2a104000, 2a104fff]
PCI: 0000:00:03.1 reg 10 32bit mmio: [2a103000, 2a103fff]
PCI: 0000:00:03.2 reg 10 32bit mmio: [2a102000, 2a102fff]
PCI: 0000:00:03.3 reg 10 32bit mmio: [2a101000, 2a101fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
PCI: 0000:00:04.0 reg 10 io port: [2000, 20ff]
PCI: 0000:00:04.0 reg 14 32bit mmio: [2a100000, 2a100fff]
PCI: 0000:00:04.0 reg 30 32bit mmio: [fffe0000, ffffffff]
pci 0000:00:04.0: supports D1
pci 0000:00:04.0: supports D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [20000000, 27ffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [2a000000, 2a01ffff]
PCI: 0000:01:00.0 reg 18 io port: [1000, 107f]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [1000, 1fff]
PCI: bridge 0000:00:01.0 32bit mmio: [2a000000, 2a0fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [20000000, 27ffffff]
PCI: bridge 0000:00:1f.0 32bit mmio: [1e000000, 1e0fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:07: ioport range 0x800-0x8fe has been reserved
system 00:07: ioport range 0x8ff-0x8ff has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x4d6-0x4d6 has been reserved
system 00:07: ioport range 0x295-0x29e has been reserved
system 00:07: ioport range 0x2e8-0x2ef has been reserved
system 00:07: ioport range 0x481-0x48f has been reserved
system 00:08: iomem range 0x0-0x9ffff could not be reserved
system 00:08: iomem range 0xec000-0xfffff could not be reserved
system 00:08: iomem range 0x100000-0x1dffffff could not be reserved
system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x1000-0x1fff
pci 0000:00:01.0:   MEM window: 0x2a000000-0x2a0fffff
pci 0000:00:01.0:   PREFETCH window: 0x00000020000000-0x00000027ffffff
pci 0000:00:1f.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1f.0:   IO window: disabled
pci 0000:00:1f.0:   MEM window: 0x1e000000-0x1e0fffff
pci 0000:00:1f.0:   PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1f.0: enabling device (0000 -> 0002)
pci 0000:00:1f.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [1000, 1fff]
bus: 01 index 1 mmio: [2a000000, 2a0fffff]
bus: 01 index 2 mmio: [20000000, 27ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [1e000000, 1e0fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2579k freed
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
JFS: nTxBlock = 3689, nTxLock = 29517
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Jul 22 2009 07:23:43) installed
msgmni has been set to 922
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:1f.0: setting latency timer to 64
pcieport-driver 0000:00:1f.0: found MSI capability
pci_express 0000:00:1f.0:pcie00: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Uniform Multi-Platform E-IDE driver
sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01)
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2100-0x2107
    ide1: BM-DMA at 0x2108-0x210f
Probing IDE interface ide0...
hda: SONY CD-RW CRX230E, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
	with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
usbmon: debugfs is not available
ehci_hcd 0000:00:03.3: enabling device (0100 -> 0102)
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 23, io mem 0x2a101000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: enabling device (0100 -> 0102)
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0x2a104000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 2
ohci_hcd 0000:00:03.1: enabling device (0100 -> 0102)
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0x2a103000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: enabling device (0100 -> 0102)
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0x2a102000
usb 1-6: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    468 MB/s
raid6: int32x2    476 MB/s
raid6: int32x4    434 MB/s
raid6: int32x8    349 MB/s
raid6: mmxx1     1585 MB/s
raid6: mmxx2     1799 MB/s
raid6: sse1x1    1070 MB/s
raid6: sse1x2    1389 MB/s
raid6: sse2x1    1986 MB/s
raid6: sse2x2    2245 MB/s
raid6: using algorithm sse2x2 (2245 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input2
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.

EXT4-fs: ram0: not marked OK to use with test code.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 388k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20081208
fuse init (API version 7.9)
GFS2: Unrecognized block device or mount point /dev/hda
GFS2: gfs2 mount does not exist
GFS2: Unrecognized block device or mount point /dev/hda
GFS2: gfs2 mount does not exist
scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sda] 1001472 512-byte hardware sectors (513 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] 1001472 512-byte hardware sectors (513 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
UDF-fs: No VRS found
GFS2: Unrecognized block device or mount point /dev/sda
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
GFS2: Unrecognized block device or mount point /dev/sda
GFS2: gfs2 mount does not exist
Linux agpgart interface v0.103
agpgart-sis 0000:00:00.0: SiS chipset [1039/0662]
agpgart-sis 0000:00:00.0: AGP aperture is 32M @ 0x28000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 2:0:0:0: Attached scsi generic sg0 type 0
sis900.c: v1.08.10 Apr. 2 2006
sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: SiS 900 on Foxconn 661 7MI transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 19, 00:1c:c0:6e:07:c6
input: PC Speaker as /class/input/input3
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
eth0: Media Link On 100mbps full-duplex
You may also look at it here -
Linux dmesg: http://pastebin.org/342040
OpenBSD bsd.rd dmesg output is available here: http://pastebin.org/341850
Reply With Quote