View Single Post
  #7   (View Single Post)  
Old 10th January 2011
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 3,503
Default

Code:
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:04:76:e6:5c:4e
	priority: 0
	groups: egress
	media: Ethernet autoselect (none)
	status: no carrier
	inet6 fe80::204:76ff:fee6:5c4e%xl0 prefixlen 64 scopeid 0x1
	inet 192.168.1.66 netmask 0xffffff00 broadcast 192.168.1.255
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:02:1c:f1:35:51
	priority: 0
	media: Ethernet autoselect (none)
	status: no carrier
	inet6 fe80::202:1cff:fef1:3551%xl1 prefixlen 64 scopeid 0x2
	inet 192.168.1.67 netmask 0xffffff00 broadcast 192.168.1.255
xl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:01:02:b7:1b:16
	priority: 0
	media: Ethernet autoselect (100baseTX full-duplex)
	status: active
	inet6 fe80::201:2ff:feb7:1b16%xl2 prefixlen 64 scopeid 0x3
	inet 192.168.1.68 netmask 0xffffff00 broadcast 192.168.1.255
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote