View Single Post
Old 23rd October 2008
There0 There0 is offline
./dev/null
 
Join Date: Jul 2008
Posts: 170
Default

HP tc4200 tablet running as my main firewall is first dmesg;

OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,S S,TM,SBF,EST,TM2
real mem = 1064726528 (1015MB)
avail mem = 1021480960 (974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/10/06, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xf310a (23 entries)
bios0: vendor Hewlett-Packard version "68DTH Ver. F.09" date 03/10/2006
bios0: Hewlett-Packard HP Compaq tc4200 (PZ407UA#ABA)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/176 (9 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5400/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x2000
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120d2606000d26
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1733 MHz (1308 mV): speeds: 1733, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
agp0 at pchb0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 16
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): irq 11, address 00:0f:b0:74:f8:28
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03: irq 10
pci2 at ppb1 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci3 at ppb2 bus 2
iwi0 at pci3 dev 4 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11, address 00:12:f0:bf:a6:00
cbb0 at pci3 dev 6 function 0 "TI PCI7XX1 CardBus" rev 0x00: irq 10
"TI PCI7XX1 Flash" rev 0x00 at pci3 dev 6 function 3 not configured
sdhc0 at pci3 dev 6 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 10
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
"TI PCI7XX1 Smart Card" rev 0x00 at pci3 dev 6 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 10, ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e77d netmask ef7d ttymask ffff
mtrr: Pentium Pro MTRR support
dc0 at cardbus0 dev 0 function 0 "ADMtek AN985" rev 0x11: irq 10, address 00:14:6c:bf:bc:61
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000749, model 0x0001
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 1.10/38.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 1.10/38.10 addr 2
uhidev1: iclass 3/1, 17 report ids
ums0 at uhidev1 reportid 2: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse1 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhidev1 detached
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 1.10/38.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 1.10/38.10 addr 2
uhidev1: iclass 3/1, 17 report ids
ums0 at uhidev1 reportid 2: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse1 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhidev1 detached


Newest edition my T61 with Amd64;

OpenBSD 4.3 (GENERIC.MP) #1582: Wed Mar 12 11:16:45 MDT 2008
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 3219443712 (3070MB)
avail mem = 3110666240 (2966MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (73 entries)
bios0: vendor LENOVO version "7LET56WW (1.26 )" date 10/18/2007
bios0: LENOVO 766312U
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 1995.37 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 1995.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T5227" serial 38141 type LION oem "LGC"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpidock at acpi0 not configured
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06170a2b06000a2b
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2000 MHz (1388 mV): speeds: 2000, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
agp0 at pchb0: no integrated graphics
ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: apic 1 int 16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0429 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1 int 20 (irq 11), address 00:1e:37:16:9c:19
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 int 17 (irq 11)
azalia0: RIRB time out
azalia0: RIRB time out
azalia0: codec[s]: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices AD1984
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 (irq 11)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 21 (irq 11)
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Wireless WiFi Link 4965AGN" rev 0x61: apic 1 int 17 (irq 11), MoW1, address 00:1d:e0:06:95:67
ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 22 (irq 11)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1 int 23 (irq 11)
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 (irq 11)
pci6 at ppb5 bus 13
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 (irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 (irq 11)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci7 at ppb6 bus 21
cbb0 at pci7 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16 (irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci7 dev 0 function 1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHW2080BH PL>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4247N, 1.02> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech Logitech USB Optical Mouse" rev 2.00/43.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen1 at uhub5 port 2 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2
ugen2 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 3
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

I sold the rest of my machines (from 7 down to 4) and only 2 (another 1 not deployed) now run OpenBSD I sadly state, I couldn't get OpenBSD installed unto my Asus P5Q-dlx with Q6600 and 8gb or Dominator ram either, but i'm not to worried though OpenBSD seems to run pretty dam solid all around, I REALLY like it.

Last edited by There0; 23rd October 2008 at 04:42 AM.
Reply With Quote