View Single Post
  #6   (View Single Post)  
Old 22nd February 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Default

ibook's new Xorg.0.log after upgrade :
Code:
[2725604.840] (--) Using wscons driver
[2725604.933] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[2725604.934] X Protocol Version 11, Revision 0
[2725604.934] Build Operating System: OpenBSD 5.1 macppc 
[2725604.934] Current Operating System: OpenBSD zenbsd.my.domain 5.1 GENERIC#150 macppc
[2725604.935] Build Date: 11 February 2012  10:56:27PM
[2725604.936]  
[2725604.936] Current version of pixman: 0.22.2
[2725604.936] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[2725604.936] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[2725604.937] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 09:28:19 2012
[2725604.992] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[2725604.997] (==) No Layout section.  Using the first Screen section.
[2725604.998] (==) No screen section available. Using defaults.
[2725604.998] (**) |-->Screen "Default Screen Section" (0)
[2725604.998] (**) |   |-->Monitor "<default monitor>"
[2725605.001] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[2725605.001] (==) Disabling SIGIO handlers for input devices
[2725605.001] (==) Automatically adding devices
[2725605.001] (==) Automatically enabling devices
[2725605.182] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[2725605.182] (==) ModulePath set to "/usr/X11R6/lib/modules"
[2725605.182] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[2725605.195] (II) Loader magic: 0x19e1598
[2725605.195] (II) Module ABI versions:
[2725605.195] 	X.Org ANSI C Emulation: 0.4
[2725605.195] 	X.Org Video Driver: 11.0
[2725605.196] 	X.Org XInput driver : 13.0
[2725605.196] 	X.Org Server Extension : 6.0
[2725605.201] (--) PCI:*(0:0:16:0) 1002:4c46:1002:4c46 rev 2, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[2725605.202] (II) LoadModule: "extmod"
[2725605.236] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[2725605.247] (II) Module extmod: vendor="X.Org Foundation"
[2725605.248] 	compiled for 1.11.4, module version = 1.0.0
[2725605.248] 	Module class: X.Org Server Extension
[2725605.249] 	ABI class: X.Org Server Extension, version 6.0
[2725605.249] (II) Loading extension MIT-SCREEN-SAVER
[2725605.249] (II) Loading extension XFree86-VidModeExtension
[2725605.249] (II) Loading extension XFree86-DGA
[2725605.249] (II) Loading extension DPMS
[2725605.249] (II) Loading extension XVideo
[2725605.249] (II) Loading extension XVideo-MotionCompensation
[2725605.249] (II) Loading extension X-Resource
[2725605.249] (II) LoadModule: "dbe"
[2725605.250] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[2725605.255] (II) Module dbe: vendor="X.Org Foundation"
[2725605.255] 	compiled for 1.11.4, module version = 1.0.0
[2725605.255] 	Module class: X.Org Server Extension
[2725605.255] 	ABI class: X.Org Server Extension, version 6.0
[2725605.256] (II) Loading extension DOUBLE-BUFFER
[2725605.256] (II) LoadModule: "glx"
[2725605.257] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[2725605.271] (II) Module glx: vendor="X.Org Foundation"
[2725605.272] 	compiled for 1.11.4, module version = 1.0.0
[2725605.272] 	ABI class: X.Org Server Extension, version 6.0
[2725605.273] (==) AIGLX enabled
[2725605.273] (II) Loading extension GLX
[2725605.274] (II) LoadModule: "record"
[2725605.276] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[2725605.281] (II) Module record: vendor="X.Org Foundation"
[2725605.281] 	compiled for 1.11.4, module version = 1.13.0
[2725605.281] 	Module class: X.Org Server Extension
[2725605.281] 	ABI class: X.Org Server Extension, version 6.0
[2725605.281] (II) Loading extension RECORD
[2725605.282] (II) LoadModule: "dri"
[2725605.283] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[2725605.295] (II) Module dri: vendor="X.Org Foundation"
[2725605.296] 	compiled for 1.11.4, module version = 1.0.0
[2725605.296] 	ABI class: X.Org Server Extension, version 6.0
[2725605.297] (II) Loading extension XFree86-DRI
[2725605.298] (II) LoadModule: "dri2"
[2725605.299] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[2725605.304] (II) Module dri2: vendor="X.Org Foundation"
[2725605.304] 	compiled for 1.11.4, module version = 1.2.0
[2725605.304] 	ABI class: X.Org Server Extension, version 6.0
[2725605.305] (II) Loading extension DRI2
[2725605.305] (==) Matched ati as autoconfigured driver 0
[2725605.305] (==) Assigned the driver to the xf86ConfigLayout
[2725605.305] (II) LoadModule: "ati"
[2725605.306] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
[2725605.309] (II) Module ati: vendor="X.Org Foundation"
[2725605.309] 	compiled for 1.11.4, module version = 6.12.2
[2725605.309] 	Module class: X.Org Video Driver
[2725605.309] 	ABI class: X.Org Video Driver, version 11.0
[2725605.310] (II) LoadModule: "r128"
[2725605.311] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
[2725605.331] (II) Module r128: vendor="X.Org Foundation"
[2725605.332] 	compiled for 1.11.4, module version = 6.8.1
[2725605.332] 	Module class: X.Org Video Driver
[2725605.332] 	ABI class: X.Org Video Driver, version 11.0
[2725605.333] (II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
[2725605.335] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
[2725605.337] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[2725605.337] (II) R128(0): PCI bus 0 card 16 func 0
[2725605.337] (II) R128(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[2725605.338] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[2725605.338] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[2725605.338] (==) R128(0): Default visual is TrueColor
[2725605.338] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
[2725605.339] (==) R128(0): RGB weight 888
[2725605.339] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[2725605.339] (--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46)
[2725605.339] (--) R128(0): Linear framebuffer at 0x94000000
[2725605.339] (--) R128(0): MMIO registers at 0x90000000
[2725605.340] (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
[2725605.340] (**) R128(0): Using flat panel for display
[2725605.483] (WW) R128(0): Video BIOS not found!
[2725605.483] (II) R128(0): Primary Display == Type 2
[2725605.483] (WW) R128(0): Can't determine panel dimensions, and none specified.
	Disabling programming of FP registers.
[2725605.484] (II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=10500
[2725605.484] (II) Loading sub module "ddc"
[2725605.484] (II) LoadModule: "ddc"
[2725605.484] (II) Module "ddc" already built-in
[2725605.485] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[2725605.486] (II) R128(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[2725605.486] (II) R128(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[2725605.486] (II) R128(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[2725605.486] (WW) R128(0): Unable to estimate virtual size
[2725605.486] (II) R128(0): Clock range:  12.50 to 250.00 MHz
[2725605.487] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x175" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x200" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "360x200" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[2725605.487] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.487] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[2725605.488] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[2725605.488] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768i" (interlace mode not supported)
[2725605.488] (II) R128(0): Not using default mode "512x384i" (interlace mode not supported)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "576x432" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[2725605.488] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported)
[2725605.488] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[2725605.489] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[2725605.489] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[2725605.489] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported)
[2725605.489] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[2725605.489] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "832x624" (hsync out of range)
[2725605.490] (II) R128(0): Not using default mode "416x312" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[2725605.490] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[2725605.490] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[2725605.490] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[2725605.490] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported)
[2725605.491] (--) R128(0): Virtual size is 1024x768 (pitch 1024)
[2725605.491] (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[2725605.491] (II) R128(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[2725605.491] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[2725605.491] (II) R128(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[2725605.491] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[2725605.492] (II) R128(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[2725605.492] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[2725605.492] (II) R128(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[2725605.492] (==) R128(0): DPI set to (96, 96)
[2725605.492] (II) Loading sub module "fb"
[2725605.492] (II) LoadModule: "fb"
[2725605.498] (II) Loading /usr/X11R6/lib/modules/libfb.so
[2725605.572] (II) Module fb: vendor="X.Org Foundation"
[2725605.572] 	compiled for 1.11.4, module version = 1.0.0
[2725605.573] 	ABI class: X.Org ANSI C Emulation, version 0.4
[2725605.573] (II) Loading sub module "ramdac"
[2725605.573] (II) LoadModule: "ramdac"
[2725605.573] (II) Module "ramdac" already built-in
[2725605.573] (II) Loading sub module "xaa"
[2725605.573] (II) LoadModule: "xaa"
[2725605.577] (II) Loading /usr/X11R6/lib/modules/libxaa.so
[2725605.610] (II) Module xaa: vendor="X.Org Foundation"
[2725605.611] 	compiled for 1.11.4, module version = 1.2.1
[2725605.611] 	ABI class: X.Org Video Driver, version 11.0
[2725605.611] (II) Loading sub module "shadowfb"
[2725605.611] (II) LoadModule: "shadowfb"
[2725605.615] (II) Loading /usr/X11R6/lib/modules/libshadowfb.so
[2725605.636] (II) Module shadowfb: vendor="X.Org Foundation"
[2725605.636] 	compiled for 1.11.4, module version = 1.0.0
[2725605.636] 	ABI class: X.Org ANSI C Emulation, version 0.4
[2725605.636] (II) R128(0): Page flipping disabled
[2725605.636] (!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
[2725605.636] (--) Depth 24 pixmap format is 32 bpp
[2725605.662] (WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
[2725605.680] (II) R128(0): Memory manager initialized to (0,0) (1024,2048)
[2725605.680] (II) R128(0): Reserved area from (0,768) to (1024,770)
[2725605.680] (II) R128(0): Largest offscreen area available: 1024 x 1278
[2725605.683] (II) R128(0): Using XFree86 Acceleration Architecture (XAA)
[2725605.683] 	Screen to screen bit blits
[2725605.683] 	Solid filled rectangles
[2725605.683] 	8x8 mono pattern filled rectangles
[2725605.684] 	Indirect CPU to Screen color expansion
[2725605.684] 	Solid Lines
[2725605.684] 	Dashed Lines
[2725605.684] 	Scanline Image Writes
[2725605.686] 	Setting up tile and stipple cache:
[2725605.686] 		32 128x128 slots
[2725605.686] 		10 256x256 slots
[2725605.687] (II) R128(0): Acceleration enabled
[2725605.689] (==) R128(0): Backing store disabled
[2725605.689] (==) R128(0): Silken mouse disabled
[2725605.695] (II) R128(0): Using hardware cursor (scanline 3080)
[2725605.695] (II) R128(0): Largest offscreen area available: 1024 x 1276
[2725605.703] (==) R128(0): DPMS enabled
[2725605.706] (WW) R128(0): Direct rendering disabled
[2725605.709] (==) RandR enabled
[2725605.710] (II) Initializing built-in extension Generic Event Extension
[2725605.710] (II) Initializing built-in extension SHAPE
[2725605.710] (II) Initializing built-in extension MIT-SHM
[2725605.710] (II) Initializing built-in extension XInputExtension
[2725605.710] (II) Initializing built-in extension XTEST
[2725605.710] (II) Initializing built-in extension BIG-REQUESTS
[2725605.710] (II) Initializing built-in extension SYNC
[2725605.710] (II) Initializing built-in extension XKEYBOARD
[2725605.710] (II) Initializing built-in extension XC-MISC
[2725605.710] (II) Initializing built-in extension SECURITY
[2725605.710] (II) Initializing built-in extension XINERAMA
[2725605.710] (II) Initializing built-in extension XFIXES
[2725605.710] (II) Initializing built-in extension RENDER
[2725605.710] (II) Initializing built-in extension RANDR
[2725605.711] (II) Initializing built-in extension COMPOSITE
[2725605.711] (II) Initializing built-in extension DAMAGE
[2725605.799] (II) AIGLX: Screen 0 is not DRI2 capable
[2725605.800] (II) AIGLX: Screen 0 is not DRI capable
[2725606.095] (II) AIGLX: Loaded and initialized swrast
[2725606.096] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[2725608.680] (II) config/wscons: checking input device /dev/wskbd
[2725608.681] (II) wskbd: using layout us
[2725608.681] (II) wskbd: using model macintosh
[2725608.682] (II) LoadModule: "kbd"
[2725608.685] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[2725608.701] (II) Module kbd: vendor="X.Org Foundation"
[2725608.701] 	compiled for 1.11.4, module version = 1.6.1
[2725608.701] 	Module class: X.Org XInput Driver
[2725608.701] 	ABI class: X.Org XInput driver, version 13.0
[2725608.701] (II) Using input driver 'kbd' for '/dev/wskbd'
[2725608.701] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[2725608.702] (**) /dev/wskbd: always reports core events
[2725608.703] (**) /dev/wskbd: always reports core events
[2725608.703] (**) Option "Protocol" "standard"
[2725608.703] (**) Option "XkbRules" "base"
[2725608.703] (**) Option "XkbModel" "macintosh"
[2725608.703] (**) Option "XkbLayout" "us"
[2725608.703] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[2725608.962] (II) config/wscons: checking input device /dev/wsmouse
[2725608.962] (II) LoadModule: "ws"
[2725608.965] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[2725608.980] (II) Module ws: vendor="X.Org Foundation"
[2725608.980] 	compiled for 1.11.4, module version = 1.3.0
[2725608.980] 	Module class: X.Org XInput Driver
[2725608.980] 	ABI class: X.Org XInput driver, version 13.0
[2725608.980] (II) Using input driver 'ws' for '/dev/wsmouse'
[2725608.981] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[2725608.981] (**) /dev/wsmouse: always reports core events
[2725608.982] (II) ws: /dev/wsmouse: debuglevel 0
[2725608.982] (**) Option "Device" "/dev/wsmouse"
[2725608.982] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[2725608.983] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[2725608.983] (**) ws: /dev/wsmouse: associated screen: 0
[2725608.983] (II) ws: /dev/wsmouse: minimum x position: 0
[2725608.984] (II) ws: /dev/wsmouse: maximum x position: 1023
[2725608.984] (II) ws: /dev/wsmouse: minimum y position: 0
[2725608.984] (II) ws: /dev/wsmouse: maximum y position: 767
[2725608.984] (==) ws: /dev/wsmouse: Buttons: 7
[2725608.984] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[2725608.984] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[2725608.987] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[2725608.987] (**) /dev/wsmouse: (accel) acceleration profile 0
[2725608.987] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[2725608.987] (**) /dev/wsmouse: (accel) acceleration threshold: 4
Reply With Quote