Thread: Urtw driver compatibility question
View Single Post
  #6   (View Single Post)  
Old 12th February 2010
Alex_Dc Alex_Dc is offline
New User
  
Join Date: Nov 2009
Posts: 7
Default
Quote:
Originally Posted by ocicat View Post
If you have a MS-DOS formatted USB drive, you can mount it & copy dmesg output saved to a file to it. Information on how to mount a MS-DOS formatted device can be seen in examples in the mount(8) manpage & Section 14.17 of the FAQ.
Wow. And with three usb sticks sitting two feet from my laptop. If I may be allowed to quote myself on this one:

Quote:
Originally Posted by Alex_Dc View Post
I just wanted to make sure that I wasn't doing something stupid (not unlikely)
Anyway, you were pretty spot on the nose, except for the fact that I am running 4.6-stable. But, I digress. For your reading pleasure,

dmesg:

Code:
OpenBSD 4.6 (GENERIC) #58: Thu Jul  9 21:24:42 MDT 2009
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 900 @ 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
real mem  = 2008043520 (1915MB)
avail mem = 1932615680 (1843MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/23/09, SMBIOS rev. 2.4 @ 0xe8130 (35 entries)
bios0: vendor INSYDE version "2.10" date 09/23/2009
bios0: TOSHIBA Satellite L305
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SLIC BOOT SSDT SSDT
acpi0: wakeup devices LID0(S4) P32_(S0) UHC1(S3) UHC2(S3) ECHI(S3) EXP1(S4) EXP2(S0) EXP3(S4) EXP4(S4) EXP5(S4) EXP6(S4) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P32_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP4)
acpiprt6 at acpi0: bus 6 (EXP5)
acpiprt7 at acpi0: bus -1 (EXP6)
acpiprt8 at acpi0: bus -1 (PEGP)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1
acpipwrres0 at acpi0: FN00
acpitz0 at acpi0: critical temperature 114 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpivideo0 at acpi0: OVGA
acpivideo1 at acpi0: VGA_
acpivout0 at acpivideo1: CRT_
acpivout1 at acpivideo1: LCD_
acpivout2 at acpivideo1: TV__
bios0: ROM list: 0xc0000/0xfa00! 0xd0000/0x1000 0xd1000/0x2c00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 16 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 21 (irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 19 (irq 11)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 4 int 22 (irq 11)
azalia0: codecs: Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 4 int 17 (irq 5)
pci1 at ppb0 bus 2
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102E (0x3480), apic 4 int 16 (irq 5), address 00:1e:33:dc:ee:42
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 4 int 17 (irq 11)
pci2 at ppb1 bus 6
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 23 (irq 11)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 19 (irq 11)
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 4 int 16 (irq 11)
uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x03: apic 4 int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 23 (irq 11)
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 4 int 19 (irq 11), AHCI 1.2
ahci0: PHY offline on port 1
ahci0: PHY offline on port 4
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9160310AS, SD58> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
cd0 at scsibus0 targ 5 lun 0: <TSSTcorp, CDDVDW TS-L633A, TO03> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 4 int 18 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
urtw0 at uhub1 port 6 "Realtek RTL8187B" rev 2.00/2.00 addr 2
urtw0: RTL8187B rev E, address 00:24:d2:dd:e6:0d
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/43.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub5 port 1 configuration 1 interface 0 "Logitech Logitech USB Keyboard" rev 1.10/28.00 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
umass0 at uhub1 port 1 configuration 1 interface 0 "PNY USB 2.0 FD" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
scsibus1 detached
umass0 detached
umass0 at uhub1 port 1 configuration 1 interface 0 "PNY USB 2.0 FD" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <PNY, USB 2.0 FD, PMAP> SCSI0 0/direct removable
sd1: 492MB, 512 bytes/sec, 1007616 sec total
sd1 detached
scsibus1 detached
umass0 detached
umass0 at uhub1 port 1 configuration 1 interface 0 "PNY USB 2.0 FD" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <PNY, USB 2.0 FD, PMAP> SCSI0 0/direct removable
sd1: 492MB, 512 bytes/sec, 1007616 sec total
sd1 detached
scsibus1 detached
umass0 detached
umass0 at uhub1 port 1 configuration 1 interface 0 "PNY USB 2.0 FD" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <PNY, USB 2.0 FD, PMAP> SCSI0 0/direct removable
sd1: 492MB, 512 bytes/sec, 1007616 sec total
ifconfig:

Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
	priority: 0
	groups: lo
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:1e:33:dc:ee:42
	priority: 0
	media: Ethernet autoselect (none)
	status: no carrier
enc0: flags=0<> mtu 1536
	priority: 0
urtw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:24:d2:dd:e6:0d
	priority: 4
	groups: wlan
	media: IEEE802.11 autoselect
	status: no network
	ieee80211: nwid "" 100dBm
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
	priority: 0
	groups: pflog
ifconfig with device up:
Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
	priority: 0
	groups: lo
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:1e:33:dc:ee:42
	priority: 0
	media: Ethernet autoselect (none)
	status: no carrier
enc0: flags=0<> mtu 1536
	priority: 0
urtw0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:24:d2:dd:e6:0d
	priority: 4
	groups: wlan
	media: IEEE802.11 autoselect (DS1 mode 11b)
	status: no network
	ieee80211: nwid "" 100dBm
	inet6 fe80::224:d2ff:fedd:e60d%urtw0 prefixlen 64 scopeid 0x4
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
	priority: 0
	groups: pflog
ifconfig with the device up and configure (static IP in this instance, obvious stufff commented out):

Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
	priority: 0
	groups: lo
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:1e:33:dc:ee:42
	priority: 0
	media: Ethernet autoselect (none)
	status: no carrier
enc0: flags=0<> mtu 1536
	priority: 0
urtw0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:24:d2:dd:e6:0d
	priority: 4
	groups: wlan
	media: IEEE802.11 autoselect (DS1 mode 11g)
	status: active
	ieee80211: nwid [correct ssid] chan [correct chan] bssid [correct bssid] 143dB nwkey [correct key] 100dBm
	inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
	priority: 0
	groups: pflog
Quote:
Originally Posted by ocicat View Post
[*] Have you tried configuring with smaller incremental steps? What happens if you assign a fixed IP address?
I have, and as you already saw, I posted the example. Obviously, the device status shows 'active', but I can't ping the AP.

As far as the dhclient.conf, I haven't even tried setting it at all. The man page indicated that it should work by default, but if you think there may be some specific settings I need to include, I will go ahead and try configuring it.

Quote:
Originally Posted by ocicat View Post
[*] What is being used as the AP?
An old Linksys WRT54G. I'll have to get back to you with the exact version as I don't have physical access to it at the moment, but suffice it to say that, apparently, I haven't update the firmware since Feb. 2006 (oops!).
Reply With Quote