View Single Post
Old 13th July 2008
pseudonym pseudonym is offline
Port Guard
Join Date: Jul 2008
Posts: 13

Figured I would also throw in the dmesg as well.

[root@octavian /home/pseudonym]# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz (1872.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f2  Stepping = 2
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2137153536 (2038 MB)
avail memory = 2081665024 (1985 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <INTEL DQ965GF> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3438-0x343f mem 0x90200000-0x902fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
agp0: <Intel Q965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x3430-0x3437,0x344c-0x344f,0x3428-0x342f,0x3448-0x344b,0x3400-0x340f irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x30e0-0x30ff mem 0x90300000-0x9031ffff,0x90324000-0x90324fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: Ethernet address: 00:19:d1:04:50:52
em0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x90326c00-0x90326fff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci1: <Marvell 88SX6101 UDMA133 controller> port 0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem 0x90100000-0x901001ff irq 17 at device 0.0 on pci2
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci2: <UHCI (generic) USB controller> port 0x3080-0x309f irq 23 at device 29.0 on pci0
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 19 at device 29.1 on pci0
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x90326800-0x90326bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci2: <SiI SiI 3512 SATA150 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0x90004800-0x900049ff irq 21 at device 0.0 on pci6
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
fwohci0: <Texas Instruments TSB43AB22/A> mem 0x90004000-0x900047ff,0x90000000-0x90003fff irq 19 at device 3.0 on pci6
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:b3:00:37:13:44:37
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12dc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:b3:13:44:37
fwe0: Ethernet address: 02:02:b3:13:44:37
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:b3:00:37:13:44:37 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci3: <Intel ICH8 SATA300 controller> port 0x3418-0x341f,0x3444-0x3447,0x3410-0x3417,0x3440-0x3443,0x3020-0x303f mem 0x90326000-0x903267ff irq 19 at device 31.2 on pci0
atapci3: [ITHREAD]
atapci3: AHCI called from vendor specific driver
atapci3: AHCI Version 01.10 controller with 6 ports detected
ata7: <ATA channel 0> on atapci3
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci3
ata8: [ITHREAD]
ata9: <ATA channel 2> on atapci3
ata9: [ITHREAD]
ata10: <ATA channel 3> on atapci3
ata10: [ITHREAD]
ata11: <ATA channel 4> on atapci3
ata11: [ITHREAD]
ata12: <ATA channel 5> on atapci3
ata12: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub1
kbd2 at ukbd0
uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub1
Timecounters tick every 1.000 msec
hptrr: no controller detected.firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)

ad8: 715404MB <Seagate ST3750640A 3.AAE> at ata4-master UDMA100
ad14: 305245MB <Seagate ST3320620AS 3.AAE> at ata7-master SATA150
ad16: 238475MB <Seagate ST3250410AS 3.AAC> at ata8-master SATA150
ad18: 238475MB <Seagate ST3250410AS 3.AAC> at ata9-master SATA150
ad20: 305245MB <Seagate ST3320620AS 3.AAC> at ata10-master SATA150
ad22: 238475MB <Seagate ST3250410AS 3.AAC> at ata11-master SATA150
ad24: 305245MB <Seagate ST3320620AS 3.AAE> at ata12-master SATA150
ar0: 915729MB <Intel MatrixRAID RAID0 (stripe 128 KB)> status: READY
ar0: disk0 READY using ad14 at ata7-master
ar0: disk1 READY using ad20 at ata10-master
ar0: disk2 READY using ad24 at ata12-master
ar1: 476944MB <Intel MatrixRAID RAID5 (stripe 128 KB)> status: READY
ar1: disk0 READY using ad16 at ata8-master
ar1: disk1 READY using ad18 at ata9-master
ar1: disk2 READY using ad22 at ata11-master
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ar0s1a
WARNING: /archive/babylon was not properly dismounted
Reply With Quote