Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33204
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:50:da:b2:37:1c
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::250:daff:feb2:371c%xl0 prefixlen 64 scopeid 0x1
inet x.x.x.x netmask 0xffffffe0 broadcast x.x.x.x
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:01:03:de:32:84
description: Wired
media: Ethernet 100baseTX full-duplex (100baseTX half-duplex)
status: active
inet 10.100.0.226 netmask 0xffff0000 broadcast 10.100.255.255
inet6 fe80::201:3ff:fede:3284%xl1 prefixlen 64 scopeid 0x2
xl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:50:da:5b:71:54
description: Wireless
media: Ethernet 100baseTX full-duplex (100baseTX half-duplex)
status: active
inet 172.16.0.226 netmask 0xfffff000 broadcast 172.16.15.255
inet6 fe80::250:daff:fe5b:7154%xl2 prefixlen 64 scopeid 0x3
vr0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:2f:7b:c1:41
media: Ethernet autoselect (none)
status: no carrier
enc0: flags=0<> mtu 1536
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33204
groups: pflog
Code:
# grep -v "#" /etc/dhcpd.conf
authoritative;
shared-network WIRED {
default-lease-time 86400;
option domain-name "freak.dub";
option nis-domain "freak.dub";
option domain-name-servers 172.16.0.226, x.x.x.2, x.x.x.3, x.x.x.20, x.x.x.25, x.x..30;
option broadcast-address 172.16.0.255;
option routers 172.16.0.226;
option ntp-servers 172.16.0.226;
subnet 172.16.0.0 netmask 255.255.255.0 {
range 172.16.0.25 172.16.0.35;
}
host vdubmac {
hardware ethernet 00:25:00:4d:24:df;
fixed-address 172.16.0.222;
}
}
shared-network WIRELESS {
option domain-name "wifi.freak.dub";
option domain-name-servers 172.16.0.226, x.x.x.2, x.x.x.3, x.x.x.20, x.x.x.25, x.x.x.30;
subnet 172.16.0.0 netmask 255.255.255.0 {
option routers 172.16.0.226;
option domain-name-servers 172.16.0.226;
option ntp-servers 172.16.0.226;
range 172.16.0.25 172.16.0.35;
}
}
xl1 is WIRED subnet and xl2 is WIRELESS subnet. When I had "10.100.0.226" as the WIRED router, it bled through to my laptop which gets it's IP via a Linksys AP being used as just that, an AP only, to the WIRELESS vlan on my Catalyst 2950 switch which is shared by the port on the switch which connects to my xl2 iface.
Can anybody tell me why it's not handing out the WIRELESS settings to a client getting it's IP via the WIRELESS interface?
oh yes...
Code:
# uname -a
OpenBSD zeus.freak.dub 4.4 GENERIC#1021 i386