Thank you J65nko, i am impress and grateful by your work and time you spend on this problem.
Yes i have sound on Ubuntu Live CD 9.04, here is the dmesg i got from this Ubuntu :
Code:
[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 7f75c000 - 7febf993
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fe4993
[ 0.000000] Move RAMDISK from 000000007f75c000 - 000000007febf992 to 00881000 - 00fe4992
[ 0.000000] ACPI: RSDP 000F7CE0, 0014 (r0 K8M890)
[ 0.000000] ACPI: RSDT 7FEF3040, 0034 (r1 K8M890 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FEF30C0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FEF3180, 6DE7 (r1 K8M890 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FEF0000, 0040
[ 0.000000] ACPI: HPET 7FEFA080, 0038 (r1 K8M890 AWRDACPI 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 7FEFA100, 003C (r1 K8M890 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FEF9FC0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fe4993] NEW RAMDISK ==> [0000881000 - 0000fe4993]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f3ec0] 000f3ec0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295388 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1981.570 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10480000 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2051860k/2096064k available (4126k kernel code, 42820k reserved, 2208k data, 532k init, 1190856k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3963.14 BogoMIPS (lpj=7926280)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004000] using C1E aware idle routine
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.016480] SMP alternatives: switching to UP code
[ 0.131591] ACPI: Core revision 20080926
[ 0.134250] ACPI: Checking initramfs for custom DSDT
[ 0.428477] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.468569] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
[ 0.472001] Brought up 1 CPUs
[ 0.472001] Total of 1 processors activated (3963.14 BogoMIPS).
[ 0.472001] CPU0 attaching NULL sched-domain.
[ 0.472001] net_namespace: 776 bytes
[ 0.472001] Booting paravirtualized kernel on bare hardware
[ 0.472001] Time: 9:07:39 Date: 02/27/13
[ 0.472001] regulator: core version 0.5
[ 0.472001] NET: Registered protocol family 16
[ 0.472001] EISA bus registered
[ 0.472001] ACPI: bus type pci registered
[ 0.472001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.472001] PCI: MCFG area at e0000000 reserved in E820
[ 0.472001] PCI: Using MMCONFIG for extended config space
[ 0.472001] PCI: Using configuration type 1 for base access
[ 0.472001] ACPI: EC: Look up EC in DSDT
[ 0.481636] ACPI: Interpreter enabled
[ 0.481643] ACPI: (supports S0 S1 S4 S5)
[ 0.481663] ACPI: Using IOAPIC for interrupt routing
[ 0.489673] ACPI: No dock devices found.
[ 0.489683] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.489747] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.490082] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.490086] pci 0000:00:02.0: PME# disabled
[ 0.490127] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.490130] pci 0000:00:03.0: PME# disabled
[ 0.490174] pci 0000:00:0f.0: reg 10 io port: [0xff00-0xff07]
[ 0.490180] pci 0000:00:0f.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.490186] pci 0000:00:0f.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.490192] pci 0000:00:0f.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.490198] pci 0000:00:0f.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.490204] pci 0000:00:0f.0: reg 24 io port: [0xf400-0xf4ff]
[ 0.490256] pci 0000:00:0f.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.490318] pci 0000:00:10.0: reg 20 io port: [0xf900-0xf91f]
[ 0.490333] pci 0000:00:10.0: supports D1 D2
[ 0.490335] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490338] pci 0000:00:10.0: PME# disabled
[ 0.490378] pci 0000:00:10.1: reg 20 io port: [0xf800-0xf81f]
[ 0.490393] pci 0000:00:10.1: supports D1 D2
[ 0.490395] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490399] pci 0000:00:10.1: PME# disabled
[ 0.490440] pci 0000:00:10.2: reg 20 io port: [0xf700-0xf71f]
[ 0.490455] pci 0000:00:10.2: supports D1 D2
[ 0.490457] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490461] pci 0000:00:10.2: PME# disabled
[ 0.490501] pci 0000:00:10.3: reg 20 io port: [0xf600-0xf61f]
[ 0.490516] pci 0000:00:10.3: supports D1 D2
[ 0.490518] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490521] pci 0000:00:10.3: PME# disabled
[ 0.490547] pci 0000:00:10.4: reg 10 32bit mmio: [0xdffff000-0xdffff0ff]
[ 0.490576] pci 0000:00:10.4: supports D1 D2
[ 0.490578] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490582] pci 0000:00:10.4: PME# disabled
[ 0.490713] pci 0000:00:12.0: reg 10 io port: [0xf200-0xf2ff]
[ 0.490719] pci 0000:00:12.0: reg 14 32bit mmio: [0xdfffe000-0xdfffe0ff]
[ 0.490746] pci 0000:00:12.0: supports D1 D2
[ 0.490747] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490751] pci 0000:00:12.0: PME# disabled
[ 0.490926] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.490930] pci 0000:00:01.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
[ 0.490934] pci 0000:00:01.0: bridge 32bit mmio pref: [0xdfa00000-0xdfafffff]
[ 0.490967] pci 0000:02:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.490977] pci 0000:02:00.0: reg 18 64bit mmio: [0xdfee0000-0xdfeeffff]
[ 0.490984] pci 0000:02:00.0: reg 20 io port: [0xde00-0xdeff]
[ 0.490994] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.491002] pci 0000:02:00.0: supports D1 D2
[ 0.491039] pci 0000:02:00.1: reg 10 64bit mmio: [0xdfefc000-0xdfefffff]
[ 0.491067] pci 0000:02:00.1: supports D1 D2
[ 0.491114] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
[ 0.491118] pci 0000:00:02.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.491123] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.491164] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.491168] pci 0000:00:03.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[ 0.491174] pci 0000:00:03.0: bridge 64bit mmio pref: [0xdfc00000-0xdfcfffff]
[ 0.491205] pci 0000:04:05.0: reg 10 io port: [0xbf00-0xbf7f]
[ 0.491211] pci 0000:04:05.0: reg 14 32bit mmio: [0xdf9ff000-0xdf9ff07f]
[ 0.491231] pci 0000:04:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.491239] pci 0000:04:05.0: supports D1 D2
[ 0.491241] pci 0000:04:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.491245] pci 0000:04:05.0: PME# disabled
[ 0.491275] pci 0000:00:13.1: transparent bridge
[ 0.491278] pci 0000:00:13.1: bridge io port: [0xb000-0xbfff]
[ 0.491282] pci 0000:00:13.1: bridge 32bit mmio: [0xdf900000-0xdf9fffff]
[ 0.491288] pci 0000:00:13.1: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff]
[ 0.491304] bus 00 -> node 0
[ 0.491310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.491687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[ 0.491831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.491972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 0.566538] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.566585] pci 0000:80:01.0: reg 10 64bit mmio: [0xbfffc000-0xbfffffff]
[ 0.566608] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[ 0.566611] pci 0000:80:01.0: PME# disabled
[ 0.566648] bus 80 -> node 0
[ 0.566653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.567216] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.567429] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 0.567640] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 0.567852] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
[ 0.568050] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.568232] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.568413] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.568608] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[ 0.568745] ACPI: WMI: Mapper loaded
[ 0.568918] SCSI subsystem initialized
[ 0.568953] libata version 3.00 loaded.
[ 0.568993] usbcore: registered new interface driver usbfs
[ 0.569007] usbcore: registered new interface driver hub
[ 0.569031] usbcore: registered new device driver usb
[ 0.569130] PCI: Using ACPI for IRQ routing
[ 0.569243] Bluetooth: Core ver 2.13
[ 0.569243] NET: Registered protocol family 31
[ 0.569243] Bluetooth: HCI device and connection manager initialized
[ 0.569243] Bluetooth: HCI socket layer initialized
[ 0.569243] NET: Registered protocol family 8
[ 0.569243] NET: Registered protocol family 20
[ 0.569243] NetLabel: Initializing
[ 0.569243] NetLabel: domain hash size = 128
[ 0.569243] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.569243] NetLabel: unlabeled traffic allowed by default
[ 0.569243] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.569243] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.572069] AppArmor: AppArmor Filesystem Enabled
[ 0.572076] pnp: PnP ACPI init
[ 0.572076] ACPI: bus type pnp registered
[ 0.576017] Switched to high resolution mode on CPU 0
[ 0.577810] pnp: PnP ACPI: found 16 devices
[ 0.577812] ACPI: ACPI bus type pnp unregistered
[ 0.577815] PnPBIOS: Disabled by ACPI PNP
[ 0.577825] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.577828] system 00:01: ioport range 0x500-0x50f has been reserved
[ 0.577833] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.577836] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.577844] system 00:0c: iomem range 0xf0000000-0xf0000fff has been reserved
[ 0.577849] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.577855] system 00:0f: iomem range 0xd0000-0xd3fff has been reserved
[ 0.577858] system 00:0f: iomem range 0xd8800-0xdbfff has been reserved
[ 0.577860] system 00:0f: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.577863] system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
[ 0.577866] system 00:0f: iomem range 0x7ff00000-0x7fffffff has been reserved
[ 0.577869] system 00:0f: iomem range 0xfed00000-0xfed000ff has been reserved
[ 0.577871] system 00:0f: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.577874] system 00:0f: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.577877] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.577880] system 00:0f: iomem range 0x100000-0x7feeffff could not be reserved
[ 0.577883] system 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.577886] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.577888] system 00:0f: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.612576] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.612579] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.612584] pci 0000:00:01.0: MEM window: 0xdfb00000-0xdfbfffff
[ 0.612588] pci 0000:00:01.0: PREFETCH window: 0x000000dfa00000-0x000000dfafffff
[ 0.612595] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.612598] pci 0000:00:02.0: IO window: 0xd000-0xdfff
[ 0.612603] pci 0000:00:02.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.612607] pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.612612] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.612615] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.612620] pci 0000:00:03.0: MEM window: 0xdfd00000-0xdfdfffff
[ 0.612624] pci 0000:00:03.0: PREFETCH window: 0x000000dfc00000-0x000000dfcfffff
[ 0.612631] pci 0000:00:13.1: PCI bridge, secondary bus 0000:04
[ 0.612634] pci 0000:00:13.1: IO window: 0xb000-0xbfff
[ 0.612638] pci 0000:00:13.1: MEM window: 0xdf900000-0xdf9fffff
[ 0.612642] pci 0000:00:13.1: PREFETCH window: 0x000000df800000-0x000000df8fffff
[ 0.612653] pci 0000:00:01.0: setting latency timer to 64
[ 0.612665] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.612669] pci 0000:00:02.0: setting latency timer to 64
[ 0.612677] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.612681] pci 0000:00:03.0: setting latency timer to 64
[ 0.612687] pci 0000:00:13.1: setting latency timer to 64
[ 0.612691] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.612693] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.612695] bus: 01 index 0 io port: [0xe000-0xefff]
[ 0.612698] bus: 01 index 1 mmio: [0xdfb00000-0xdfbfffff]
[ 0.612700] bus: 01 index 2 mmio: [0xdfa00000-0xdfafffff]
[ 0.612702] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.612704] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 0.612706] bus: 02 index 1 mmio: [0xdfe00000-0xdfefffff]
[ 0.612708] bus: 02 index 2 mmio: [0xc0000000-0xcfffffff]
[ 0.612710] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.612712] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.612714] bus: 03 index 1 mmio: [0xdfd00000-0xdfdfffff]
[ 0.612716] bus: 03 index 2 mmio: [0xdfc00000-0xdfcfffff]
[ 0.612718] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.612720] bus: 04 index 0 io port: [0xb000-0xbfff]
[ 0.612722] bus: 04 index 1 mmio: [0xdf900000-0xdf9fffff]
[ 0.612724] bus: 04 index 2 mmio: [0xdf800000-0xdf8fffff]
[ 0.612726] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.612728] bus: 04 index 4 mmio: [0x000000-0xffffffff]
[ 0.612730] bus: 80 index 0 io port: [0x00-0xffff]
[ 0.612732] bus: 80 index 1 mmio: [0x000000-0xffffffff]
[ 0.612743] NET: Registered protocol family 2
[ 0.612880] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.613142] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.613638] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.613878] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.613881] TCP reno registered
[ 0.613981] NET: Registered protocol family 1
[ 0.614096] checking if image is initramfs... it is
[ 1.213153] Freeing initrd memory: 7566k freed
[ 1.213235] cpufreq: No nForce2 chipset.
[ 1.213349] audit: initializing netlink socket (disabled)
[ 1.213362] type=2000 audit(1361956059.212:1): initialized
[ 1.221205] highmem bounce pool size: 64 pages
[ 1.221211] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.222288] VFS: Disk quotas dquot_6.5.1
[ 1.222338] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.222886] fuse init (API version 7.10)
[ 1.222965] msgmni has been set to 1698
[ 1.223117] alg: No test for stdrng (krng)
[ 1.223127] io scheduler noop registered
[ 1.223129] io scheduler anticipatory registered
[ 1.223130] io scheduler deadline registered
[ 1.223146] io scheduler cfq registered (default)
[ 1.223153] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.223163] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.223246] pci 0000:02:00.0: Boot video device
[ 1.223335] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.223366] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.223369] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.223383] pci_express 0000:00:02.0:pcie01: allocate port service
[ 1.223393] pci_express 0000:00:02.0:pcie02: allocate port service
[ 1.223404] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.223449] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 1.223483] pcieport-driver 0000:00:03.0: found MSI capability
[ 1.223486] pci_express 0000:00:03.0:pcie00: allocate port service
[ 1.223496] pci_express 0000:00:03.0:pcie01: allocate port service
[ 1.223510] pci_express 0000:00:03.0:pcie02: allocate port service
[ 1.223520] pci_express 0000:00:03.0:pcie03: allocate port service
[ 1.227625] aer 0000:00:02.0:pcie01: service driver aer loaded
[ 1.231587] aer 0000:00:03.0:pcie01: service driver aer loaded
[ 1.231596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.232056] pciehp 0000:00:02.0:pcie02: HPC vendor_id 1106 device_id a238 ss_vid 0 ss_did 0
[ 1.232079] pciehp 0000:00:02.0:pcie02: service driver pciehp loaded
[ 1.232499] pciehp 0000:00:03.0:pcie02: HPC vendor_id 1106 device_id c238 ss_vid 0 ss_did 0
[ 1.232520] pciehp 0000:00:03.0:pcie02: service driver pciehp loaded
[ 1.232527] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.232651] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.232654] ACPI: Power Button (FF) [PWRF]
[ 1.232692] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.232694] ACPI: Power Button (CM) [PWRB]
[ 1.233325] processor ACPI_CPU:00: registered as cooling_device0
[ 1.237536] isapnp: Scanning for PnP cards...
[ 1.591221] isapnp: No Plug & Play device found
[ 1.592262] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.592344] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.592426] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.592676] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.592785] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.593499] brd: module loaded
[ 1.593789] loop: module loaded
[ 1.593861] Fixed MDIO Bus: probed
[ 1.593867] PPP generic driver version 2.4.2
[ 1.593924] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.593952] Driver 'sd' needs updating - please use bus_type methods
[ 1.593960] Driver 'sr' needs updating - please use bus_type methods
[ 1.594100] sata_via 0000:00:0f.0: version 2.4
[ 1.594119] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.594153] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.594241] scsi0 : sata_via
[ 1.594329] scsi1 : sata_via
[ 1.595752] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 21
[ 1.595755] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 21
[ 1.796020] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.008013] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.018960] pata_via 0000:00:0f.1: version 0.3.3
[ 2.019081] scsi2 : pata_via
[ 2.019139] scsi3 : pata_via
[ 2.020768] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.020770] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.185460] ata3.00: ATA-5: WDC WD400BB-23DEA0, 05.03E05, max UDMA/100
[ 2.185463] ata3.00: 78165360 sectors, multi 16: LBA
[ 2.201336] ata3.00: configured for UDMA/100
[ 2.372371] ata4.00: ATAPI: PIONEER DVD-ROM DVD-115, 1.12, max UDMA/33
[ 2.372399] ata4.01: ATAPI: TSSTcorpCD/DVDW SH-S162A, TS02, max UDMA/33
[ 2.388266] ata4.00: configured for UDMA/33
[ 2.404267] ata4.01: configured for UDMA/33
[ 2.405415] scsi 2:0:0:0: Direct-Access ATA WDC WD400BB-23DE 05.0 PQ: 0 ANSI: 5
[ 2.405504] sd 2:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.405518] sd 2:0:0:0: [sda] Write Protect is off
[ 2.405521] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.405542] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.405600] sd 2:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.405612] sd 2:0:0:0: [sda] Write Protect is off
[ 2.405614] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.405635] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.405639] sda: sda4
[ 2.423467] sda4: <openbsd: sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
[ 2.423718] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.423763] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.425072] scsi 3:0:0:0: CD-ROM PIONEER DVD-ROM DVD-115 1.12 PQ: 0 ANSI: 5
[ 2.425819] sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
[ 2.425823] Uniform CD-ROM driver Revision: 3.20
[ 2.425908] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.425945] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.427025] scsi 3:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-S162A TS02 PQ: 0 ANSI: 5
[ 2.429893] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.429957] sr 3:0:1:0: Attached scsi CD-ROM sr1
[ 2.429999] sr 3:0:1:0: Attached scsi generic sg2 type 5
[ 2.430134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.430157] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.430180] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.430235] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.430269] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
[ 2.440017] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.440083] usb usb1: configuration #1 chosen from 1 choice
[ 2.440109] hub 1-0:1.0: USB hub found
[ 2.440116] hub 1-0:1.0: 8 ports detected
[ 2.440214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.440231] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.440272] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.440278] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.440316] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.440344] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900
[ 2.440410] usb usb2: configuration #1 chosen from 1 choice
[ 2.440437] hub 2-0:1.0: USB hub found
[ 2.440444] hub 2-0:1.0: 2 ports detected
[ 2.440519] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.440524] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.440567] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.440593] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800
[ 2.440660] usb usb3: configuration #1 chosen from 1 choice
[ 2.440682] hub 3-0:1.0: USB hub found
[ 2.440688] hub 3-0:1.0: 2 ports detected
[ 2.440760] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.440765] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.440805] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.440823] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
[ 2.440889] usb usb4: configuration #1 chosen from 1 choice
[ 2.440917] hub 4-0:1.0: USB hub found
[ 2.440923] hub 4-0:1.0: 2 ports detected
[ 2.440997] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.441002] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.441038] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.441063] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600
[ 2.441135] usb usb5: configuration #1 chosen from 1 choice
[ 2.441156] hub 5-0:1.0: USB hub found
[ 2.441162] hub 5-0:1.0: 2 ports detected
[ 2.441263] usbcore: registered new interface driver libusual
[ 2.441295] usbcore: registered new interface driver usbserial
[ 2.441304] USB Serial support registered for generic
[ 2.441317] usbcore: registered new interface driver usbserial_generic
[ 2.441319] usbserial: USB Serial Driver core
[ 2.441358] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.441361] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.441447] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.441550] mice: PS/2 mouse device common for all mice
[ 2.441675] rtc_cmos 00:04: RTC can wake from S4
[ 2.441704] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.441737] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.441806] device-mapper: uevent: version 1.0.3
[ 2.441907] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.441948] device-mapper: multipath: version 1.0.5 loaded
[ 2.441951] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.442025] EISA: Probing bus 0 at eisa.0
[ 2.442060] EISA: Detected 0 cards.
[ 2.442082] cpuidle: using governor ladder
[ 2.442084] cpuidle: using governor menu
[ 2.442544] TCP cubic registered
[ 2.442631] NET: Registered protocol family 10
[ 2.442993] lo: Disabled Privacy Extensions
[ 2.443277] NET: Registered protocol family 17
[ 2.443293] Bluetooth: L2CAP ver 2.11
[ 2.443294] Bluetooth: L2CAP socket layer initialized
[ 2.443297] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.443298] Bluetooth: SCO socket layer initialized
[ 2.443326] Bluetooth: RFCOMM socket layer initialized
[ 2.443332] Bluetooth: RFCOMM TTY layer initialized
[ 2.443334] Bluetooth: RFCOMM ver 1.10
[ 2.443355] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ processors (1 cpu cores) (version 2.20.00)
[ 2.448531] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 2.448596] Using IPI No-Shortcut mode
[ 2.448683] registered taskstats version 1
[ 2.448803] Magic number: 1:23:122
[ 2.448896] rtc_cmos 00:04: setting system clock to 2013-02-27 09:07:41 UTC (1361956061)
[ 2.448899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.448901] EDD information not available.
[ 2.449188] Freeing unused kernel memory: 532k freed
[ 2.449312] Write protecting the kernel text: 4128k
[ 2.449355] Write protecting the kernel read-only data: 1532k
[ 2.485986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.903955] FDC 0 is a post-1991 82077
[ 2.936038] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.046213] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.046253] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.046874] eth0: VIA Rhine II at 0xdfffe000, 00:19:db:c1:43:89, IRQ 23.
[ 3.047518] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[ 3.057391] 3c59x 0000:04:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.057415] 3c59x: Donald Becker and others.
[ 3.057421] 0000:04:05.0: 3Com PCI 3c905C Tornado at f7c50000.
[ 3.157463] usb 2-2: configuration #1 chosen from 1 choice
[ 3.342377] usbcore: registered new interface driver hiddev
[ 3.381658] input: HID 1241:1166 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4
[ 3.381958] generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:10.0-2/input0
[ 3.381977] usbcore: registered new interface driver usbhid
[ 3.381980] usbhid: v2.6:USB HID core driver
[ 5.327706] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.352812] ISO 9660 Extensions: RRIP_1991A
[ 5.570896] aufs 20080922
[ 5.791336] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 52.901181] udev: starting version 141
[ 53.144810] parport_pc 00:0a: reported by Plug and Play ACPI
[ 53.144856] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 53.461921] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 53.728329] Linux agpgart interface v0.103
[ 53.891360] ppdev: user-space parallel port driver
[ 54.523465] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 54.571441] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[ 54.576387] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 54.820544] HDA Intel 0000:02:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
[ 54.820660] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 54.820665] HDA Intel 0000:02:00.1: PCI: Disallowing DAC for device
[ 54.868448] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 54.868495] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 54.868499] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 54.901911] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 64.487756] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 64.487760] Bluetooth: BNEP filters: protocol multicast
[ 64.520836] Bridge firewalling registered
[ 68.353846] pci 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 68.657177] [drm] Initialized drm 1.1.0 20060810
[ 68.721868] pci 0000:02:00.0: setting latency timer to 64
[ 68.722027] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 69.529872] lp0: using parport0 (interrupt-driven).
[ 69.546591] [drm] Setting GART location based on new memory map
[ 69.563083] [drm] Loading RV635 CP Microcode
[ 69.563793] [drm] Loading RV635 PFP Microcode
[ 69.578797] [drm] Resetting GPU
[ 69.578855] [drm] writeback test succeeded in 1 usecs
[ 72.951310] eth1: setting full-duplex.
[ 72.952708] eth0: link down
[ 72.952921] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 78.450796] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 83.284011] eth1: no IPv6 routers present