View Single Post
Old 23rd November 2013
joekiser joekiser is offline
The World is Yours.
 
Join Date: May 2008
Posts: 51
Default

HP Elitebook 8460p
- Hard Disk was pulled from my main machine, a Lenovo X200
- No changes were made to the config
- Video detected, sound works, 1080p video plays through VLC, brightness / volume keys work
- Could not properly resume from suspend. Lost the keyboard (everything else still works including WiFi). Did not attempt SSH troubleshooting.


Quote:
OpenBSD 5.4-stable (GENERIC) #0: Thu Nov 21 06:36:34 EST 2013
joekiser@X200.VALHALLA:/usr/src/sys/arch/amd64/compile/GENERIC
RTC BIOS diagnostic error 95<clock_battery,memory_size,invalid_time>
real mem = 4184596480 (3990MB)
avail mem = 4065513472 (3877MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbcdb6000 (27 entries)
bios0: vendor Hewlett-Packard version "68SCF Ver. F.42" date 07/15/2013
bios0: Hewlett-Packard HP EliteBook 8460p
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT SSDT SLIC SSDT SSDT ASF!
acpi0: wakeup devices LANC(S0) EHC1(S3) EHC2(S3) PCIB(S5) RP02(S4) ECF0(S4) RP03(S4) RP04(S5) WNIC(S5) RP06(S0) NIC_(S0) RP07(S4) RP08(S4) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2494.74 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4 .1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE ,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus -1 (PCIB)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 35 (RP03)
acpiprt5 at acpi0: bus 36 (RP04)
acpiprt6 at acpi0: bus 37 (RP08)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpitz0 at acpi0: critical temperature is 128 degC
acpitz1 at acpi0acpitz1: GFXZ: failed to read _TMP
acpitz2 at acpi0: critical temperature is 128 degC
acpitz3 at acpi0: critical temperature is 128 degC
acpitz4 at acpi0: critical temperature is 128 degC
acpitz5 at acpi0acpitz5: PCHZ: failed to read _TMP
acpitz6 at acpi0acpitz6: DM1Z: failed to read _TMP
acpitz7 at acpi0acpitz7: DM2Z: failed to read _TMP
acpibat0 at acpi0: BAT0 model "Primary" serial 54710 2012/08/26 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2501, 2500, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1600x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 0 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address e4:11:5b:32:2c:c0
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: IDT 92HD81B1X, AT&T/Lucent/0x1040, Intel/0x2805, using IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 35
"JMicron FireWire" rev 0x30 at pci3 dev 0 function 0 not configured
"JMicron SD/MMC" rev 0x30 at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 "JMicron SD Host Controller" rev 0x30: apic 0 int 18
sdmmc0 at sdhc0
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 36
iwn0 at pci4 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 10:0b:a9:44:7f:b4
ppb4 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 37
"NEC xHCI" rev 0x04 at pci5 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD7500BPKT-75PK4T0>
wd0: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
atapiscsi0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 19 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 1 "Validity Sensors VFS471 Fingerprint Reader" rev 1.10/0.86 addr 3
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen1 at uhub3 port 6 "Broadcom Corp HP Integrated Module" rev 2.00/3.06 addr 3
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd0: 707204MB, 512 bytes/sector, 1448354667 sectors
softraid0: volume sd0 is roaming, it used to be sd3, updating metadata
softraid0: roaming device sd0a -> wd0a
root on sd0a (a8173fe9a34b3257.a) swap on sd0b dump on sd0b

Last edited by joekiser; 23rd November 2013 at 03:20 AM.
Reply With Quote