View Single Post
Old 29th January 2010
Giridhari Giridhari is offline
New User
 
Join Date: Jan 2010
Posts: 5
Arrow ZTE MF626 info, and dmesg

The ZTE MF63=26 does not have a screen, but an LED mode indicator.



Below is the dmesg from this system, snapshot 26/01/2010 :


OpenBSD 4.6-current (GENERIC.MP) #69: Wed Jan 20 06:49:43 MST 2010
todd@amd64.openbsd.org:/usr/src/sys/...ile/GENERIC.MP
real mem = 2145255424 (2045MB)
avail mem = 2078789632 (1982MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (55 entries)
bios0: vendor Award Software International, Inc. version "F2" date 04/30/2009
bios0: Gigabyte Technology Co., Ltd. GA-MA790GP-UD4H
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT HPET MCFG TAMG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) PS2M(S5) PS2K(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) 9950 Quad-Core Processor, 2612.38 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) 9950 Quad-Core Processor, 2611.91 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) 9950 Quad-Core Processor, 2611.91 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) 9950 Quad-Core Processor, 2611.91 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE9)
acpiprt9 at acpi0: bus 2 (PCEA)
acpiprt10 at acpi0: bus -1 (PCEB)
acpiprt11 at acpi0: bus -1 (PCEC)
acpiprt12 at acpi0: bus -1 (AGP_)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
mem address conflict 0xe0000000/0x20000000
bridge mem address conflict 0xfdd00000/0x100000
bridge mem address conflict 0xfdf00000/0x100000
mem address conflict 0xfe02f000/0x400
mem address conflict 0xfe02e000/0x1000
mem address conflict 0xfe02d000/0x1000
mem address conflict 0xfe02c000/0x100
mem address conflict 0xfe02b000/0x1000
mem address conflict 0xfe02a000/0x1000
mem address conflict 0xfe029000/0x100
mem address conflict 0xfe024000/0x4000
bridge mem address conflict 0xfa000000/0x3000000
bridge mem address conflict 0xfde00000/0x100000
mem address conflict 0xfe028000/0x1000
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 2 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 18 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 18 (irq 10)
pci2 at ppb1 bus 2
mem address conflict 0xfdfff000/0x1000
mem address conflict 0xfdfe0000/0x10000
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), apic 2 int 18 (irq 10), address 00:24:1d:75:44:e5
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22 (irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, MAXTOR STM325082, 3.AA> SCSI3 0/direct fixed
sd0: 238474MB, 512 bytes/sec, 488395055 sec total
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq 7), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq 7), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19 (irq 3)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-108, 1.17> ATAPI 5/cdrom removable
wd0 at pciide0 channel 0 drive 1: <ST340016A>
wd0: 16-sector PIO, LBA, 38165MB, 78163247 sectors
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16 (irq 7)
azalia0: codecs: Realtek ALC885
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
mem address conflict 0xfb000000/0x1000000
mem address conflict 0xfa000000/0x1000000
mem address conflict 0xfcfff000/0x800
mem address conflict 0xfcff8000/0x4000
"Conexant CX2388x" rev 0x05 at pci3 dev 6 function 0 not configured
"Conexant CX2388x MPEG" rev 0x05 at pci3 dev 6 function 2 not configured
"TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 14 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0x228
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
wsdisplay0: screen 2 deleted
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)



Also, can we stop calling RAID 0 RAID? It is a time consuming process to redistinguish was isn't actaully RAID from what actually is.
Reply With Quote