View Single Post
  #1   (View Single Post)  
Old 11th November 2009
blueprint blueprint is offline
New User
 
Join Date: Oct 2009
Posts: 4
Default seagate drive issue

Hi guys, I have an installation of OpenBSD 4.6 with 6 disk drives connected to onboard sata on an Intel DP43TF motherboard.

My drives are:
sd0,1,2 = Seagate Baracuda 750GB
sd3,4,5 = Samsung 1TB spinpoint F1

None of the drives are in a raid config, just standard partitioning with Disklabel.

I seem to be experiencing really slow speeds with the Seagate drives, approximately 20MB/s while the Samsung drives are doing around 70MB/s.

I have tried the generic.sp kernel as well as disable acpi. Could this be a firmware issue with my drives?

I can't see anything in the dmesg output but with my limited openbsd experience i thought id ask for help.

Code:
OpenBSD 4.6 (GENERIC.MP) #81: Thu Jul  9 21:26:19 MDT 2009
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3216707584 (3067MB)
avail mem = 3107082240 (2963MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe84b0 (58 entries)
bios0: vendor Intel Corp. version "NBG4310H.86A.0069.2008.1117.2016" date 11/17/2008
bios0: Intel Corporation DP43TF
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG ASF! HPET
acpi0: wakeup devices P0P1(S3) PS2K(S3) PS2M(S3) UAR1(S5) USB0(S3) USB1(S3) USB2(S3) USB5(S3) USB3(S3) USB4(S3) PEX0(S3) PEX1(S3) PEX2(S3) PEX3(S3) PEX4(S3) GBE_(S4) P0P2(S3) EUSB(S3) USBE(S3) SLPB(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz, 2494.13 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz, 2493.75 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus 3 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus 4 (P0P2)
acpicpu0 at acpi0:, C3, C2, C1, PSS
acpicpu1 at acpi0:, C3, C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2493 MHz: speeds: 2500, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: apic 0 int 16 (irq 11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Intel", unknown product 0x2e24 (class communications subclass miscellaneous, rev 0x03) at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH10 R BM V" rev 0x00: apic 0 int 20 (irq 10), address 00:1c:c0:a3:18:de
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 16 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 5)
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 3)
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 0 int 17 (irq 7)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 82801JI PCIE" rev 0x00: apic 0 int 19 (irq 4)
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 0 int 19 (irq 4) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GH22NP20, 1.04> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 23 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 19 (irq 4)
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 3)
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 23 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), apic 0 int 20 (irq 10), address 00:1e:2a:47:9a:dd
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: apic 0 int 19 (irq 4), AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST3750330AS, SD15> SCSI3 0/direct fixed
sd0: 715403MB, 512 bytes/sec, 1465147055 sec total
sd1 at scsibus1 targ 1 lun 0: <ATA, ST3750330AS, SD15> SCSI3 0/direct fixed
sd1: 715403MB, 512 bytes/sec, 1465147055 sec total
sd2 at scsibus1 targ 2 lun 0: <ATA, ST3750330AS, SD1A> SCSI3 0/direct fixed
sd2: 715404MB, 512 bytes/sec, 1465149168 sec total
sd3 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed
sd3: 953869MB, 512 bytes/sec, 1953525168 sec total
sd4 at scsibus1 targ 4 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed
sd4: 953869MB, 512 bytes/sec, 1953525168 sec total
sd5 at scsibus1 targ 5 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed
sd5: 953869MB, 512 bytes/sec, 1953525168 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 0 int 18 (irq 3)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
wbsio0 port 0x290/2 not configured
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 1 configuration 1 interface 0 "CHICONY HP Basic USB Keyboard" rev 1.10/3.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Reply With Quote