View Single Post
Old 4th December 2014
pawaan pawaan is offline
Fdisk Soldier
 
Join Date: Jan 2013
Posts: 82
Default OpenBSD current

OpenBSD 5.6-current on my HP 625 :
dmesg :
Quote:
OpenBSD 5.6-current (GENERIC.MP) #634: Mon Dec 1 10:11:11 MST 2014
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
RTC BIOS diagnostic error bf<clock_battery,config_unit,memory_size,fixed_dis k,invalid_time>
real mem = 4006547456 (3820MB)
avail mem = 3896045568 (3715MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xafd1c000 (20 entries)
bios0: vendor Hewlett-Packard version "68DVA Ver. F.03" date 08/13/2010
bios0: Hewlett-Packard HP 625
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC HPET SSDT
acpi0: wakeup devices PCI0(S4) PB4_(S5) NIC_(S5) PB5_(S5) PB9_(S5) PB7_(S5) ECF0(S5) HDEF(S0) USB0(S3) USB1(S3) USB4(S3) USB5(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II P360 Dual-Core Processor, 2294.68 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LON G,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,S SE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II P360 Dual-Core Processor, 2294.26 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT ,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LON G,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,S SE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpi0: WARNING EC not initialized
acpiprt0 at acpi0: bus 1 (PEGP)
acpiprt1 at acpi0: bus -1 (PEG2)
acpiprt2 at acpi0: bus 2 (PB4_)
acpiprt3 at acpi0: bus -1 (PB5_)
acpiprt4 at acpi0: bus 6 (PB9_)
acpiprt5 at acpi0: bus 3 (PB7_)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: PFN0, resource for FAN0
acpipwrres2 at acpi0: PFN1, resource for FAN1
acpipwrres3 at acpi0: PFN2, resource for FAN2
acpipwrres4 at acpi0: PFN3, resource for FAN3
acpipwrres5 at acpi0: PFN4, resource for FAN4
acpitz0 at acpi0: critical temperature is 108 degC
acpitz1 at acpi0: critical temperature is 108 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 06255 2011/03/18 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: IGFX
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: EGFX
cpu0: 2294 MHz: speeds: 2300 1700 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Hewlett-Packard", unknown product 0x9602 rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 4 int 18
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0xfffe0000/0x20000
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address 78:e3:b5:49:13:b1
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 7 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci4 at ppb3 bus 6
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG HM320II, 2AC1> SCSI3 0/direct fixed naa.50024e9204968a38
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0300> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
iic0: addr 0x4c 00=2f 01=3a 03=20 04=06 05=4b 07=5a 09=20 0a=06 0b=4b 0d=5a 19=5f 20=55 21=0a 22=70 25=0d 27=12 60=06 70=06 71=05 a4=6f a5=20 ac=29 ad=12 ae=06 af=50 b0=20 b1=20 fd=20 fe=5d ff=01 words 00=2fff 01=3aff 02=80ff 03=20ff 04=06ff 05=4bff 06=00ff 07=5aff
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: IDT/0x7667
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci5 at ppb4 bus 7
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Foxlink HP Webcam [2 MP Fixed]" rev 2.00/1.06 addr 2
video0 at uvideo0
ugen0 at uhub4 port 4 "Broadcom Corp Broadcom 2070 Bluetooth" rev 2.00/4.81 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1d7e0ef88aa1f10b.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1475).
radeondrm0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Reply With Quote