View Single Post
  #1   (View Single Post)  
Old 17th October 2012
EvilPaper EvilPaper is offline
New User
 
Join Date: Oct 2012
Posts: 2
Default openBSD 5.1 and OSPFD

Hi,

I'm actually having a problem with ospfd on openBSD 5.1 that I do not understand. I already work with ospfd on openBSD 4.7 and 4.9 and I'm wondering if someone else had this problem before.

I have 2 firewalls connected to each other.

FW1 vr0 --------- FW2 vr0

Both routers are communicating together via ospf and exchanging informations. The only problem is that routing tables on each routers are not updated...

here is the information of each firewall.

FW1 :

vr0 : 10.10.10.1/24
vr2 : 192.168.0.1/24

ospfd.conf

Code:
#macros
md1="password1"
md2="password2"

ext_if="vr0"
int_if="vr2"

router-id 192.168.0.1

# areas
area 0.0.0.0 {
        auth-type crypt
        auth-md 1 $md1
        auth-md 2 $md2
        auth-md-keyid 1

        #local link
        interface $ext_if
        interface $int_if
}
ospfctl show nei
Code:
ID              Pri State        DeadTime Address         Iface     Uptime
192.168.1.1     1   FULL/DR      00:00:37 10.10.10.2      vr0       00:00:18
ospfctl show rib
Code:
Destination          Nexthop           Path Type    Type      Cost    Uptime  
10.10.10.0/24        10.10.10.1        Intra-Area   Network   10      00:00:18
ospfctl show fib
Code:
flags: * = valid, O = OSPF, C = Connected, S = Static
Flags  Prio Destination          Nexthop          
*C        4 10.10.10.0/24        link#1
*O       32 10.10.10.0/24        10.10.10.1
*C        4 10.10.100.0/24       link#7
*C        0 127.0.0.0/8          link#0
*S        8 127.0.0.0/8          127.0.0.1
*         4 127.0.0.1/32         127.0.0.1
 C        4 192.168.0.0/24       link#3
*S        8 224.0.0.0/4          127.0.0.1
I also tried redistribute 192.168.0.0/24 and redistribute connected and it is not working.

FW2 :

vr0 : 10.10.10.2/24
vr2 : 192.168.1.1

ospfd.conf
Code:
#macros
md1="password1"
md2="password2"

ext_if="vr0"
int_if="vr2"

router-id 192.168.1.1

# areas
area 0.0.0.0 {
        auth-type crypt
        auth-md 1 $md1
        auth-md 2 $md2
        auth-md-keyid 1

        #local link
        interface $ext_if 
        interface $int_if
}
ospfctl show nei
Code:
ID              Pri State        DeadTime Address         Iface     Uptime
192.168.0.1     1   FULL/BCKUP   00:00:31 10.10.10.1      vr0       00:03:29
ospfctl show rib
Code:
Destination          Nexthop           Path Type    Type      Cost    Uptime  
10.10.10.0/24        10.10.10.2        Intra-Area   Network   10      00:03:58
ospfctl show fib
Code:
flags: * = valid, O = OSPF, C = Connected, S = Static
Flags  Prio Destination          Nexthop          
*C        4 10.10.10.0/24        link#1
*O       32 10.10.10.0/24        10.10.10.2
*C        4 10.10.100.0/24       link#7
*C        0 127.0.0.0/8          link#0
*S        8 127.0.0.0/8          127.0.0.1
*         4 127.0.0.1/32         127.0.0.1
 C        4 192.168.1.0/24       link#3
*S        8 224.0.0.0/4          127.0.0.1
Thank you
Reply With Quote