View Single Post
  #3   (View Single Post)  
Old 4th January 2013
EnigmaticFellow EnigmaticFellow is offline
New User
 
Join Date: Dec 2012
Posts: 3
Default

Quote:
Originally Posted by adamk View Post
Please show us your /var/log/Xorg.0.log file.
Here it is

Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 9.0-RELEASE amd64
Current Operating System: FreeBSD cbsd1@uncreative.com 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:46:30 UTC 2012     root@farrell.cse.buffalo.edu:/usr/obj/usr/s
rc/sys/GENERIC amd64
Build Date: 26 December 2012  02:15:20AM

Current version of pixman: 0.24.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan  3 20:47:23 2013
(==) Using config file: "/usr/local/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
        /usr/local/lib/X11/fonts/misc/,
        /usr/local/lib/X11/fonts/TTF/,
        /usr/local/lib/X11/fonts/OTF,
        /usr/local/lib/X11/fonts/Type1/,
        /usr/local/lib/X11/fonts/100dpi/,
        /usr/local/lib/X11/fonts/75dpi/,
        /usr/local/lib/X11/fonts/misc/,
        /usr/local/lib/X11/fonts/TTF/,
        /usr/local/lib/X11/fonts/OTF,
        /usr/local/lib/X11/fonts/Type1/,
        /usr/local/lib/X11/fonts/100dpi/,
        /usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7ba500
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0:0:2:0) 8086:0046:1179:fd30 Intel Corporation Core Processor Integrated Graphics Controller rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x
00008050/8, BIOS @ 0x????????/65536
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 2.3.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/local/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.1.0
        ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org Video Driver, version 6.0
(II) VESA(0): initializing int10
(==) VESA(0): Write-combining range (0xa0000,0x20000) was already clear
(==) VESA(0): Write-combining range (0xc0000,0x40000) was already clear
(II) VESA(0): Bad V_BIOS checksum
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 32704 kB
(II) VESA(0): VESA VBE OEM: Intel(R)Ironlake Mobile Graphics Chipset Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(R)Ironlake Mobile Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
Reply With Quote