View Single Post
  #1   (View Single Post)  
Old 28th July 2015
GarryR's Avatar
GarryR GarryR is offline
Real Name: Garry Ricketson
Spam Deminer
Join Date: Jul 2015
Location: Durango, Mx.
Posts: 297
Default Connecting to internet

I am pretty new to openbsd, at first I had installed the 5.6 version, then I installed the 5.7,
For the moment, I am just using a VM, but that is not really important,..
Any way, to day I did these commands, and I just wanted to know if anyone can help
interpret the results,

PING ( 56 data bytes
64 bytes from icmp_seq=0 ttl=254 time=150.130 ms
64 bytes from icmp_seq=1 ttl=254 time=132.233 ms
64 bytes from icmp_seq=2 ttl=254 time=121.764 ms

--- ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 121.764/134.709/150.130/11.711 ms
This is my dmesg:
OpenBSD 5.7 (GENERIC) #738: Sun Mar  8 10:59:31 MDT 2015
cpu0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz ("GenuineIntel" 686-class) 2.26 GHz
real mem  = 267862016 (255MB)
avail mem = 251109376 (239MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/23/99, BIOS32 rev. 0 @ 0xfc000, SMBIOS rev. 2.5 @ 0xe1000 (5 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpibat0 at acpi0: BAT0 model "1" serial 0 type VBOX oem "innotek"
acpiac0 at acpi0: AC unit online
bios0: ROM list: 0xc0000/0x9000 0xe2000/0x6000
cpu0 at mainbus0: (uniprocessor)
mtrr: CPU supports MTRRs but not enabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 8281MB, 16959488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <VBOX, CD-ROM, 1.0> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: irq 10, address 08:00:27:d0:2e:02
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not configured
auich0 at pci0 dev 5 function 0 "Intel 82801AA AC97" rev 0x01: irq 5, ICH AC97
ac97: codec id 0x83847600 (SigmaTel STAC9700)
audio0 at auich0
ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: irq 11, version 1.0
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: SMBus disabled
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (78f28ab6a7a667bb.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 1.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd0 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI2 0/direct removable serial.09306545EF105A357D6E
sd0: 14891MB, 512 bytes/sector, 30497664 sectors
hw.sensors.acpibat0.volt0=10.00 VDC (voltage)
hw.sensors.acpibat0.volt1=10.00 VDC (current voltage)
hw.sensors.acpibat0.power0=0.00 W (rate)
hw.sensors.acpibat0.watthour0=50.00 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=0.10 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.05 Wh (low capacity)
hw.sensors.acpibat0.watthour3=50.00 Wh (remaining capacity), OK
hw.sensors.acpibat0.watthour4=50.00 Wh (design capacity)
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpiac0.indicator0=On (power supply)
I am sure I can connect to internet,it appears in the ping I do, but still do not have any kind of browser installed,
My thoughts were to install w3m, but would be interested in what suggestions anyone has
All though I have looked at the FAQs, and manual, over and over, and to some extent they are very help full, but I am still not fully understanding what I need to do to install a browser, on that, I can keep going over the FAQs and manual, but if anyone does not mind, and can explain, that would be nice too,..
Ok well for now that is about it,..
thanks from Garry
Edited:, Also, yesterday when I did the 5.7 install, the "sets", were actually downloaded using http/ftp, and I think they were installed, or is there something I am missing, and that I need to do after the downloaded, it does not appear that that any packages were installed, ,,but that also kind of would be another topic maybe. I do seem to
have every thing I need to do some basic stuff, IE: mounting the usb stick, and copying files to and from it, vi works fine, ...I don't really need much, but it would be nice to be able to get online with it too.

Last edited by GarryR; 28th July 2015 at 07:22 PM.
Reply With Quote