View Single Post
Old 27th October 2010
marcolino's Avatar
marcolino marcolino is offline
Real Name: Mark
Custom Title Maker
 
Join Date: May 2008
Location: At the Mountains of Madness
Posts: 128
Default Dell PowerEdge 2450

Here is the dmesg from a Dell PowerEdge 2450 I set up on our network:
Code:
OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17 20:55:07 MDT 2010
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 928 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 2147049472 (2047MB)
avail mem = 2071560192 (1975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/03/00, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xfa1d0 (51 entries)
bios0: vendor Dell Computer Corporation version "A05" date 08/03/2000
bios0: Dell Computer Corporation PowerEdge 2450
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices DRAC(S5) PCI0(S5) PCI1(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 928 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpiprt2 at acpi0: bus 3 (I960)
acpicpu0 at acpi0
acpicpu1 at acpi0
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0xe00
esm0 at mainbus0
esm0: PowerEdge 2450 Embedded Server Management 5.24
esm0: Primary System Backplane 1.16
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
ppb0 at pci1 dev 2 function 0 "Intel i960 RM PCI-PCI" rev 0x02
pci2 at ppb0 bus 3
"Adaptec AIC-7899F" rev 0x01 at pci2 dev 4 function 0 not configured
ahc0 at pci2 dev 4 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 14 (irq 10)
scsibus0 at ahc0: 16 targets, initiator 7
st0 at scsibus0 targ 6 lun 0: <ARCHIVE, Python 06408-XXX, 8071> SCSI3 1/sequential removable
"Dell PERC 3/Si" rev 0x02 at pci1 dev 2 function 1 not configured
fxp0 at pci1 dev 8 function 0 "Intel 8255x" rev 0x08, i82559: apic 3 int 0 (irq 5), address 00:b0:d0:b0:2b:ca
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ppb1 at pci0 dev 2 function 0 "Intel i960 RN PCI-PCI" rev 0x02
pci3 at ppb1 bus 1
ami0 at pci0 dev 2 function 1 "Intel 80960RP ATU" rev 0x02: apic 3 int 4 (irq 11)
ami0: Dell 467, 32b, FW 1.06, BIOS v1p00, 128MB RAM
ami0: 2 channels, 16 targets, 1 logical drives
scsibus1 at ami0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 104034MB, 512 bytes/sec, 213061632 sec total
vga1 at pci0 dev 14 function 0 "ATI Mach64" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x50: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB SDRAM registered ECC PC133CL3
spdmem1 at iic0 addr 0x51: 512MB SDRAM registered ECC PC133CL3
spdmem2 at iic0 addr 0x52: 512MB SDRAM registered ECC PC133CL3
spdmem3 at iic0 addr 0x53: 512MB SDRAM registered ECC PC133CL3
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-224E, 3.7C> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04: apic 2 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
I had to install a supported RAID card from another Dell server to get it installed and running. Currently, I use it as an FTP server for g4u images.

I'm looking for a new server to replace this. It will continue to be an FTP server, but I need to add SMB file server functionality to it. Does anyone have any recommendations?
__________________
That's nothing a couple o' pints wouldn't fix.
Reply With Quote