View Single Post
  #3   (View Single Post)  
Old 24th August 2008
revzalot's Avatar
revzalot revzalot is offline
Shell Scout
 
Join Date: May 2008
Posts: 123
Default

Here you go. I'll take a pic of the actual laptop soon. It's an HP Pavillion N5445.

Code:
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III Mobile CPU 1066MHz ("GenuineIntel" 686-class) 1.07 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 259022848 (247MB)
avail mem = 242384896 (231MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/28/01, BIOS32 rev. 0 @ 0xfd852, SMBIOS rev. 2.3 @ 0xdf810 (38 entries)
bios0: vendor Phoenix Technologies LTD version "GF.M1.01" date 09/28/2001
bios0: Hewlett-Packard HP Pavilion Notebook PC
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd820/0x7e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc400 0xdf800/0x800! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830M Host" rev 0x03
agp0 at pchb0: aperture at 0xe8000000, size 0x8000000
vga1 at pci0 dev 2 function 0 "Intel 82830M Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82830M Video" rev 0x00 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 9
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01: irq 5
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci1 at ppb0 bus 1
"TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 0 function 0 not configured
"ESS ES2838/2839 SuperLink Modem" rev 0x01 at pci1 dev 2 function 0 not configured
esa0 at pci1 dev 3 function 0 "ESS ES1989" rev 0x12: irq 5
ac97: codec id 0x45838308 (ESS Technology ES1921)
ac97: codec features 20 bit DAC, 20 bit ADC, ESS Technology
audio0 at esa0
cbb0 at pci1 dev 4 function 0 "O2 Micro OZ6933 CardBus" rev 0x01: irq 9
cbb1 at pci1 dev 4 function 1 "O2 Micro OZ6933 CardBus" rev 0x01: irq 9
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x41, i82562: irq 9, address 00:02:3f:2e:51:5d
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01: 24-bit timer at 3579545Hz: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AT>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA710, 1.50> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x01: irq 9
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef6d netmask ef6d ttymask ffef
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Reply With Quote