View Single Post
  #5   (View Single Post)  
Old 24th August 2008
Nightweaver's Avatar
Nightweaver Nightweaver is offline
Fdisk Soldier
 
Join Date: May 2008
Location: Belgrade, Serbia
Posts: 47
Default

Here is another happy OpenBSD laptop user. I'm running 4.4 current on Toshiba Satellite A200-1CR model. Everything works like a charm.

DMESG:
Code:
OpenBSD 4.4 (GENERIC.MP) #844: Tue Aug 12 17:24:39 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2080 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
real mem  = 1063350272 (1014MB)
avail mem = 1019699200 (972MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/26/07, BIOS32 rev. 0 @ 0xfdca4, SMBIOS rev. 2.4 @ 0xdc010 (22 entries)
bios0: vendor TOSHIBA version "V1.40" date 04/26/2007
bios0: TOSHIBA Satellite A200
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SLIC APIC HPET MCFG BOOT APIC SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices HDEF(S3) PXS3(S0) USB1(S3) USB2(S3) USB3(S3) USB7(S3) LANC(S0) MODM(S3) BT__(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2080 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiprt5 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "PA3465U " serial 3658Q type Li-Ion oem "TOSHIBA"
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xdc000/0x4000! 0xe0000/0x1c00!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06190d2806000d28
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1733 MHz (1340 mV): speeds: 1733, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xc0000000, size 0x10000000
drm at vga1 unsupported
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int 22 (irq 11)
azalia0: codec[s]: Realtek/0x0862, AT&T/Lucent/0x1040, using Realtek/0x0862
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17 (irq 10)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16 (irq 10)
pci2 at ppb1 bus 4
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 2 int 17 (irq 10)
ath0: AR5424 10.0 phy 6.1 rf 10.2, WOR4W, address 00:19:7e:8f:f9:3c
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 18 (irq 11)
pci3 at ppb2 bus 5
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E (0x3400), apic 2 int 18 (irq 11), address 00:1b:38:10:2a:9c
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 6
cbb0 at pci4 dev 4 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 2 int 16 (irq 255), CardBus support disabled
"TI PCIXX12 FireWire" rev 0x00 at pci4 dev 4 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 4 function 2 not configured
sdhc0 at pci4 dev 4 function 3 "TI PCIXX12 Secure Data" rev 0x00: apic 2 int 18 (irq 10)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541612J9SA00>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L632D, TO04> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
__________________
If it moves, crypt it. Unless it's static - than you should double-crypt it.
Reply With Quote