View Single Post
  #4   (View Single Post)  
Old 24th November 2010
MihaiM MihaiM is offline
New User
 
Join Date: Nov 2010
Posts: 3
Default

Thanks for clarifying this to me, guys! Certainly, here you have the dmesg+sensors, for the sake of information:
Code:
OpenBSD 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3488088064 (3326MB)
avail mem = 3381420032 (3224MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf06e0 (47 entries)
bios0: vendor American Megatrends Inc. version "220" date 11/13/2009
bios0: ASUSTeK Computer INC. K50AB
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SRAT MSCT OEMX ECDT OEMB HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) GLAN(S4) PCE6(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) UHC5(S4) UHC6(S4) UHC7(S4) PCE7(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-84, 2300.19 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-84, 2299.15 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpiec0 at acpi0: Failed to register address space
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus 2 (PCE5)
acpiprt6 at acpi0: bus 3 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiec at acpi0 not configured
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature 120 degC
acpibat0 at acpi0: BAT0 model "K50AB" serial   type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
acpivout0 at acpivideo1: CRTD
acpivout1 at acpivideo1: LCDD
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 2 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 18 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 4500" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 18 (irq 10)
drm0 at radeondrm0
ppb1 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 17 (irq 11)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 2 int 17 (irq 11), address 00:26:18:47:3c:8a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 18 (irq 10)
pci3 at ppb2 bus 3
athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 18 (irq 10), address 00:25:d3:07:f3:aa
athn0: AR9285 rev 2 (1T1R), ROM rev 13
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22 (irq 15), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54322, FBEO> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
cd0 at scsibus0 targ 1 lun 0: <Slimtype, DVD A DS8A3S, HA24> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq 14), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq 14), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19 (irq 7)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16 (irq 14)
azalia0: codecs: VIA/0x0397
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 4
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq 10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 11h HyperTransport" rev 0x40
pchb2 at pci0 dev 24 function 1 "AMD AMD64 11h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 11h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 11h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 11h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. CNF7129" rev 2.00/15.15 addr 2
uvideo0: video control not supported for this device.
video0 at uvideo0
ubt0 at uhub2 port 1 "Cambridge Silicon Radio Bluetooth" rev 2.00/31.64 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft Microsoft(R) Compact Optical Mouse" rev 1.10/0.01 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
hw.sensors.acpitz0.temp0=60.00 degC (zone temperature)
hw.sensors.acpibat0.volt0=14.03 VDC (voltage)
hw.sensors.acpibat0.volt1=14.00 VDC (current voltage)
hw.sensors.acpibat0.amphour0=4.20 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.42 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.21 Ah (low capacity)
hw.sensors.acpibat0.amphour3=32.77 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpibat0.raw1=1 (rate)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.km0.temp0=75.50 degC
This is the first time installation info on my hardware, that I will submit to the developers - as far as I can tell, they can't know that CPU power saving is not working unless I specify. I awaited for an answer so that I can put into the subject whether this function works or not.
---

I'm more interested into the CPU scaling stuff, rather than other ACPI magic, because of the power consumption I basically can't use my laptop on OpenBSD. But thanks for the suggestion, I definitely will try -current.

@BSDfan666: I don't currently have the sysctl output saved around, if you really think it's further relevant or wish to study it, I'll post it, the next time I get on OpenBSD.

Thank you!
Reply With Quote