Hi jggimi,
Thanks for the reply.My if config output is as follows
Code:
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33196
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr xx:xx:xx:xx:xx:xx
priority: 0
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet 192.168.94.227 netmask 0xffffff00 broadcast 192.168.94.255
inet6 x::x:x:x:x%em0 prefixlen 64 scopeid 0x1
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr xx:xx:xx:xx:xx:xx
priority: 0
groups: egress
media: Ethernet autoselect (none)
status: no carrier
inet x.x.x.x netmask 0xfffffffc broadcast x.x.x.x
inet6 x::x:x:x:x%rl0 prefixlen 64 scopeid 0x2
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33196
priority: 0
groups: pflog
During the first installation only the file
hostname.em0 was there. I created the
hostname.rl0 and
mygate files manually since those was not there on my system ( OpenBSD 5.3 )