View Single Post
  #3   (View Single Post)  
Old 31st October 2018
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 828
Default

Thanks, here is a full dmesg I just collected from a different version, 5.6-beta with MP.

Code:
OpenBSD 5.6-beta (GENERIC.MP) #267: Tue Jul 22 19:20:41 MDT 2014
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,S
S,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,xTPR,PDCM,LAHF
real mem  = 2145804288 (2046MB)
avail mem = 2098270208 (2001MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/06, BIOS32 rev. 0 @ 0xf1e30, SMBIOS rev. 2.4 @ 0xf0000 (58 entries)
bios0: vendor Phoenix Technologies, LTD version "3.15" date 06/23/2006
bios0: HP Pavilion 061 ER881AA-ABA M7467C
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) HUB0(S5) UAR1(S5) PS2M(S4) PS2K(S4)
USB0(S3) USB1(S3) USB2(S3) USB3(S3) USBE(S3) AC97(S5) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,S
S,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,xTPR,PDCM,LAHF
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpitz0 at acpi0: critical temperature is 75 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x81
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC882
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci1 at ppb0 bus 1
"VIA VT6306 FireWire" rev 0x80 at pci1 dev 1 function 0 not configured
vga1 at pci1 dev 4 function 0 "S3 86C864-1" rev 0x00
vga1: aperture needed
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci1 dev 8 function 0 "Intel 82801GB LAN" rev 0x01, i82562: apic 4 int 20, address 00:17:31:10:f1:c8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GH LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00JJC0>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD-ROM TS-H352C, HP02> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 4 int 19
iic0 at ichiic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 6 configuration 1 interface 0 "Verbatim STORE N GO" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Verbatim, STORE N GO, 5.00> SCSI4 0/direct removable serial.18a50302542D13279242
sd0: 14788MB, 512 bytes/sector, 30286016 sectors
uhub5 at uhub3 port 1 "Lite-On Technology USB 1.1 2port downstream low power hub" rev 1.10/1.00 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" rev 1.10/1.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub5 port 2 configuration 1 interface 0 "Primax Electronics USB Optical Mouse" rev 2.00/2.00 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
umass1 at uhub4 port 1 configuration 1 interface 0 " USB Reader" rev 1.10/1.00 addr 2
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct removable
sd2 at scsibus3 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable
sd3 at scsibus3 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable
sd4 at scsibus3 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (5f3fac92f8101a62.a) swap on sd0b dump on sd0b
Reply With Quote