View Single Post
  #7   (View Single Post)  
Old 22nd March 2013
Destorni Destorni is offline
New User
 
Join Date: Mar 2013
Posts: 6
Default Video

Thank you a lot jggimi.

My second problem is video linked,
When doing startx the system freezes and the screen goes black, I tried to connect through ssh to check what happens but due the machine freezes I can't read the log which is empty after restarting from the case button (CTRL+ALT+DEL dont work).
Below I paste what happens when running startx before freezing,and what happens when trying to run "X -configure", I also paste the Xorg.0.log content after runing the second command, the hardware is an Asrock H61M-VS motherboard with Intel HD Graphics 2000/3000 .
sorry for continuing this post, if you wish, ill remove this post and i[ll create a new thread. (just dont know if such newbie questions are important for the forum)
Code:
#startx


X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 5.2 amd64
Current Operating System: OpenBSD BSDBOX.siemens 5.2 GENERIC.MP#368 amd64
Build Date: 22 July 2012  10:13:23PM

Current version of pixman: 0.24.4
        Before reporting problems, check [
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 22 18:47:11 2013
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
__________________________________________________ ___________________
Code:
# X -configure

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 5.2 amd64
Current Operating System: OpenBSD BSDBOX.siemens 5.2 GENERIC.MP#368 amd64
Build Date: 22 July 2012  10:13:23PM

Current version of pixman: 0.24.4
        Before reporting problems, check [
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 22 19:09:00 2013
List of video drivers:
        apm
        ark
        ati
        cirrus
        dummy
        glint
        i128
        intel
        mach64
        mga
        neomagic
        nv
        openchrome
        r128
        radeonold
        s3
        s3virge
        savage
        siliconmotion
        sis
        tdfx
        trident
        wsudl
wsudl
        vmware
        vesa
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
Segmentation fault at address 0x28

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support
         at 
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Server terminated with error (1). Closing log file.
Abort trap
#
__________________________________________________ __________________
Code:
# cd /var/log/
# less Xorg.0.log
[   277.702]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[   277.702] X Protocol Version 11, Revision 0
[   277.702] Build Operating System: OpenBSD 5.2 amd64
[   277.702] Current Operating System: OpenBSD BSDBOX.siemens 5.2 GENERIC.MP#368 amd64
[   277.703] Build Date: 22 July 2012  10:13:23PM
[   277.703]
[   277.703] Current version of pixman: 0.24.4
[   277.703]    Before reporting problems, check [
        to make sure that you have the latest version.
[   277.703] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   277.703] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 22 19:09:00 2013
[   277.703] (II) Loader magic: 0x79a6c0
[   277.703] (II) Module ABI versions:
[   277.703]    X.Org ANSI C Emulation: 0.4
[   277.703]    X.Org Video Driver: 12.0
[   277.703]    X.Org XInput driver : 16.0
[   277.703]    X.Org Server Extension : 6.0, I also paste the Xorg.0.log content after runing the second command, the hardware is an Asrock H61M-VS motherboard with Intel HD Graphics 2000/3000 .
sorry for continuing this post, if you wish, ill remove this post and i[ll create a new thread. (just dont know if such newbie questions are important for the forum)
Code:
#startx


X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 5.2 amd64
Current Operating System: OpenBSD BSDBOX.siemens 5.2 GENERIC.MP#368 amd64
Build Date: 22 July 2012  10:13:23PM

Current version of pixman: 0.24.4
        Before reporting problems, check [
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 22 19:09:00 2013
[   277.703] (II) Loader magic: 0x79a6c0
[   277.703] (II) Module ABI versions:
[   277.703]    X.Org ANSI C Emulation: 0.4
[   277.703]    X.Org Video Driver: 12.0
[   277.703]    X.Org XInput driver : 16.0
[   277.703]    X.Org Server Extension : 6.0
__________________________________________________ _____
Code:
dmesg

spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Trust USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (3c339dfdcb77d17a.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
OpenBSD 5.2 (GENERIC.MP) #368: Wed Aug  1 10:04:49 MDT 2012
    deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 8277872640 (7894MB)
avail mem = 8035143680 (7662MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xef2d0 (20 entries)
bios0: vendor American Megatrends Inc. version "P2.10" date 03/12/2012
bios0: ASRock H61M-VS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT AAFT HPET SSDT SSDT SSDT BGRT
acpi0: wakeup devices PS2K(S3) PS2M(S3) UAR1(S4) P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) PEGP(S4) PEG0(S4) PEG1(S4) PEG2(S4) PEG3(S4) GLAN(S4) EHC1(S4) EHC2(S4) XHC_(S4) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU G620 @ 2.60GHz, 2594.45 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU G620 @ 2.60GHz, 2594.11 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,NXE,LONG,LAHF
cpu1: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus 2 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: Failed to read resource settings
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2600, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: VIA/0x4397
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb5: msi
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address 00:25:22:c7:c5:28
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H61 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AAKX-0, 15.0> SCSI3 0/direct fixed naa.50014ee6acd7791b
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Trust USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (3c339dfdcb77d17a.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
OpenBSD 5.2 (GENERIC.MP) #368: Wed Aug  1 10:04:49 MDT 2012
    deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 8277872640 (7894MB)
avail mem = 8035143680 (7662MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xef2d0 (20 entries)
bios0: vendor American Megatrends Inc. version "P2.10" date 03/12/2012
bios0: ASRock H61M-VS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT AAFT HPET SSDT SSDT SSDT BGRT
acpi0: wakeup devices PS2K(S3) PS2M(S3) UAR1(S4) P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) PEGP(S4) PEG0(S4) PEG1(S4) PEG2(S4) PEG3(S4) GLAN(S4) EHC1(S4) EHC2(S4) XHC_(S4) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU G620 @ 2.60GHz, 2594.52 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU G620 @ 2.60GHz, 2594.11 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,NXE,LONG,LAHF
cpu1: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus 2 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: Failed to read resource settings
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2600, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: VIA/0x4397
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb5: msi
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address 00:25:22:c7:c5:28
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H61 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AAKX-0, 15.0> SCSI3 0/direct fixed naa.50014ee6acd7791b
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Trust USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (3c339dfdcb77d17a.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
#


I also tried setting the share memory at 128 and 64 like recommended in this post http://openbsd.7691.n7.nabble.com/st...-td219655.html and didnt work.
I tried also this http://linux-unix-open-source.105381...td5760875.html , setting vesa instead intel in the xorg.conf.new

Last edited by Destorni; 22nd March 2013 at 06:09 PM. Reason: Please use [code] & [/code] tags when posting command output.
Reply With Quote