10th January 2010
|
|
Port Guard
|
|
Join Date: Jan 2010
Location: My own head.
Posts: 39
|
|
Laptop: Fujitsu Siemens Amilo L 7310 MCN
This is diff -u (the other thing I posted earlier was dmesg)
Quote:
--- /usr/src/sys/i386/conf/GENERIC 2009-11-10 00:48:01.000000000 +0100
+++ /usr/src/sys/i386/conf/LAPKERN 2010-01-10 17:00:34.000000000 +0100
@@ -1,43 +1,27 @@
#
-# GENERIC -- Generic kernel configuration file for FreeBSD/i386
+# Specific kernel configuration file for FreeBSD/i386.
+# Laptop Fujitsu Siemens.
#
-# For more information on this file, please read the config(5) manual page,
-# and/or the handbook section on Kernel Configuration Files:
+# http://www.FreeBSD.org/doc/en_US.ISO...ig-config.html
#
-# http://www.FreeBSD.org/doc/en_US.ISO...ig-config.html
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
-# latest information.
+# /usr/share/doc/handbook
+# http://www.FreeBSD.org/
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
-# in NOTES.
-#
-# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.4.2.2 2009/11/09 23:48:01 kensmith Exp $
-cpu I486_CPU
-cpu I586_CPU
+device apic # I/O apic
cpu I686_CPU
-ident GENERIC
+ident LAPKERN
-# To statically compile in device wiring instead of /boot/device.hints
-#hints "GENERIC.hints" # Default places to look for devices.
-
-# Use the following to compile in values accessible to the kernel
-# through getenv() (or kenv(1) in userland). The format of the file
-# is 'variable=value', see kenv(1)
-#
-# env "GENERIC.env"
+device speaker #Play IBM BASIC-style noises out your speaker
+device apm_saver # Requires APM
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
-options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
@@ -45,10 +29,6 @@
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
-options NFSCLIENT # Network Filesystem Client
-options NFSSERVER # Network Filesystem Server
-options NFSLOCKD # Network Lock Manager
-options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
@@ -56,11 +36,7 @@
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
-options COMPAT_FREEBSD4 # Compatible with FreeBSD4
-options COMPAT_FREEBSD5 # Compatible with FreeBSD5
-options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
-options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
@@ -76,203 +52,87 @@
options FLOWTABLE # per-cpu routing cache
#options KDTRACE_HOOKS # Kernel DTrace hooks
-# To make an SMP kernel, the next two lines are needed
-options SMP # Symmetric MultiProcessor Kernel
-device apic # I/O APIC
-
-# CPU frequency control
-device cpufreq
-
-# Bus support.
-device acpi
-device eisa
+# Bus support
device pci
-# Floppy drives
-device fdc
-
-# ATA and ATAPI devices
-device ata
-device atadisk # ATA disk drives
-device ataraid # ATA RAID drives
-device atapicd # ATAPI CDROM drives
-device atapifd # ATAPI floppy drives
-device atapist # ATAPI tape drives
-options ATA_STATIC_ID # Static device numbering
+#
+# AGP GART support
+device agp
-# SCSI Controllers
-device ahb # EISA AHA1742 family
-device ahc # AHA2940 and onboard AIC7xxx devices
-options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
- # output. Adds ~128k to driver.
-device ahd # AHA39320/29320 and onboard AIC79xx devices
-options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
- # output. Adds ~215k to driver.
-device amd # AMD 53C974 (Tekram DC-390(T))
-device hptiop # Highpoint RocketRaid 3xxx series
-device isp # Qlogic family
-#device ispfw # Firmware for QLogic HBAs- normally a module
-device mpt # LSI-Logic MPT-Fusion
-#device ncr # NCR/Symbios Logic
-device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
-device trm # Tekram DC395U/UW/F DC315U adapters
-
-device adv # Advansys SCSI adapters
-device adw # Advansys wide SCSI adapters
-device aha # Adaptec 154x SCSI adapters
-device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
-device bt # Buslogic/Mylex MultiMaster SCSI adapters
-
-device ncv # NCR 53C500
-device nsp # Workbit Ninja SCSI-3
-device stg # TMC 18C30/18C50
-
-# SCSI peripherals
-device scbus # SCSI bus (required for SCSI)
-device ch # SCSI media changers
-device da # Direct Access (disks)
-device sa # Sequential Access (tape etc)
-device cd # CD
-device pass # Passthrough device (direct SCSI access)
-device ses # SCSI Environmental Services (and SAF-TE)
-
-# RAID controllers interfaced to the SCSI subsystem
-device amr # AMI MegaRAID
-device arcmsr # Areca SATA II RAID
-device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
-device ciss # Compaq Smart RAID 5*
-device dpt # DPT Smartcache III, IV - See NOTES for options
-device hptmv # Highpoint RocketRAID 182x
-device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
-device iir # Intel Integrated RAID
-device ips # IBM (Adaptec) ServeRAID
-device mly # Mylex AcceleRAID/eXtremeRAID
-device twa # 3ware 9000 series PATA/SATA RAID
-
-# RAID controllers
-device aac # Adaptec FSA RAID
-device aacp # SCSI passthrough for aac (requires CAM)
-device ida # Compaq Smart RAID
-device mfi # LSI MegaRAID SAS
-device mlx # Mylex DAC960 family
-device pst # Promise Supertrak SX6000
-device twe # 3ware ATA RAID
+# To include support for VGA VESA video modes
+options VESA
+options SC_PIXEL_MODE
+device dpms # DPMS suspend & resume via VESA BIOS
# atkbdc0 controls both the keyboard and the PS/2 mouse
-device atkbdc # AT keyboard controller
-device atkbd # AT keyboard
-device psm # PS/2 mouse
+device atkbdc # AT keyboard controller
+device atkbd # AT keyboard
+device psm # PS/2 mouse
+options PSM_HOOKRESUME #hook the system resume event, useful
+ #for some laptops
-device kbdmux # keyboard multiplexer
+device vga # VGA video card driver
+device splash # Splash screen and screen saver support
-device vga # VGA video card driver
+device acpi
-device splash # Splash screen and screen saver support
+# ACPI Fujitsu Extras (Buttons)
+device acpi_fujitsu
-# syscons is the default console driver, resembling an SCO console
-device sc
+# ACPI Video Extensions (LCD backlight/brightness, video output, etc.)
+device acpi_video
+
+# The cpufreq(4) driver provides support for non-ACPI CPU frequency control
+device cpufreq
+
+# Direct Rendering modules for 3D acceleration.
+device drm # DRM core module required by DRM drivers
+
+#
+# Wireless interfaces. Fujitsu laptop.
+#
+device ath # Atheros pci/cardbus NIC's
+device ath_hal # pci/cardbus chip support
+device ath_rf2413 # ath0: <Atheros 2413> at device 6.0 on pci0
+options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
+device ath_rate_sample # SampleRate tx rate control for ath
+device wlan # 802.11 support
+device wlan_ccmp # 802.11 CCMP support
+device wlan_tkip # 802.11 TKIP support
+device wlan_amrr # AMRR transmit rate control algorithm
-device agp # support several AGP chipsets
+#
+# SCSI
+#
+device scbus # SCSI bus (required for SCSI)
+device ch # SCSI media changers
+device da # Direct Access (disks)
+device cd # CD
+device ses # SCSI Environmental Services (and SAF-TE)
# Power management support (see NOTES for more options)
-#device apm
-# Add suspend/resume support for the i8254.
-device pmtimer
+device apm
+options POWERFAIL_NMI # make it beep instead of panicing
+device coretemp
+
+# ATA and ATAPI devices
+device ata
+device atadisk # ATA disk drives
+device atapicd # ATAPI CDROM drives
+options ATA_STATIC_ID # Static device numbering
+
+# syscons is the default console driver, resembling an SCO console
+device sc
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
-device cardbus # CardBus (32-bit) bus
-
-# Serial (COM) ports
-device uart # Generic UART driver
-
-# Parallel port
-device ppc
-device ppbus # Parallel port bus (required)
-device lpt # Printer
-device plip # TCP/IP over parallel
-device ppi # Parallel port interface device
-#device vpo # Requires scbus and da
-
-# If you've got a "dumb" serial or parallel PCI card that is
-# supported by the puc(4) glue driver, uncomment the following
-# line to enable it (connects to sio, uart and/or ppc drivers):
-#device puc
-
-# PCI Ethernet NICs.
-device de # DEC/Intel DC21x4x (``Tulip'')
-device em # Intel PRO/1000 Gigabit Ethernet Family
-device igb # Intel PRO/1000 PCIE Server Gigabit Family
-device ixgb # Intel PRO/10GbE Ethernet Card
-device le # AMD Am7900 LANCE and Am79C9xx PCnet
-device ti # Alteon Networks Tigon I/II gigabit Ethernet
-device txp # 3Com 3cR990 (``Typhoon'')
-device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
-device ae # Attansic/Atheros L2 FastEthernet
-device age # Attansic/Atheros L1 Gigabit Ethernet
-device alc # Atheros AR8131/AR8132 Ethernet
-device ale # Atheros AR8121/AR8113/AR8114 Ethernet
-device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
-device bfe # Broadcom BCM440x 10/100 Ethernet
-device bge # Broadcom BCM570xx Gigabit Ethernet
-device dc # DEC/Intel 21143 and various workalikes
-device et # Agere ET1310 10/100/Gigabit Ethernet
-device fxp # Intel EtherExpress PRO/100B (82557, 82558)
-device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
-device lge # Level 1 LXT1001 gigabit Ethernet
-device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
-device nfe # nVidia nForce MCP on-board Ethernet
-device nge # NatSemi DP83820 gigabit Ethernet
-#device nve # nVidia nForce MCP on-board Ethernet Networking
-device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
-device re # RealTek 8139C+/8169/8169S/8110S
-device rl # RealTek 8129/8139
-device sf # Adaptec AIC-6915 (``Starfire'')
-device sis # Silicon Integrated Systems SiS 900/SiS 7016
-device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
-device ste # Sundance ST201 (D-Link DFE-550TX)
-device stge # Sundance/Tamarack TC9021 gigabit Ethernet
-device tl # Texas Instruments ThunderLAN
-device tx # SMC EtherPower II (83c170 ``EPIC'')
-device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
-device wb # Winbond W89C840F
-device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
-
-# ISA Ethernet NICs. pccard NICs included.
-device cs # Crystal Semiconductor CS89x0 NIC
-# 'device ed' requires 'device miibus'
-device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
-device ex # Intel EtherExpress Pro/10 and Pro/10+
-device ep # Etherlink III based cards
-device fe # Fujitsu MB8696x based cards
-device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
-device sn # SMC's 9000 series of Ethernet chips
-device xe # Xircom pccard Ethernet
-
-# Wireless NIC cards
-device wlan # 802.11 support
-options IEEE80211_DEBUG # enable debug msgs
-options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
-options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
-device wlan_wep # 802.11 WEP support
-device wlan_ccmp # 802.11 CCMP support
-device wlan_tkip # 802.11 TKIP support
-device wlan_amrr # AMRR transmit rate control algorithm
-device an # Aironet 4500/4800 802.11 wireless NICs.
-device ath # Atheros pci/cardbus NIC's
-device ath_hal # pci/cardbus chip support
-options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
-device ath_rate_sample # SampleRate tx rate control for ath
-device ral # Ralink Technology RT2500 wireless NICs.
-device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
-#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
@@ -292,43 +152,10 @@
# USB support
device uhci # UHCI PCI->USB interface
-device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
-#device udbp # USB Double Bulk Pipe devices
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
-device rum # Ralink Technology RT2501USB wireless NICs
-device ural # Ralink Technology RT2500USB wireless NICs
-device uath # Atheros AR5523 wireless NICs
-device zyd # ZyDAS zb1211/zb1211b wireless NICs
-device urio # Diamond Rio 500 MP3 player
-# USB Serial devices
-device u3g # USB-based 3G modems (Option, Huawei, Sierra)
-device uark # Technologies ARK3116 based serial adapters
-device ubsa # Belkin F5U103 and compatible serial adapters
-device uftdi # For FTDI usb serial adapters
-device uipaq # Some WinCE based devices
-device uplcom # Prolific PL-2303 serial adapters
-device uslcom # SI Labs CP2101/CP2102 serial adapters
-device uvisor # Visor and Palm devices
-device uvscom # USB serial support for DDI pocket's PHS
-# USB Ethernet, requires miibus
-device aue # ADMtek USB Ethernet
-device axe # ASIX Electronics USB Ethernet
-device cdce # Generic USB over Ethernet
-device cue # CATC USB Ethernet
-device kue # Kawasaki LSI USB Ethernet
-device rue # RealTek RTL8150 USB Ethernet
-device udav # Davicom DM9601E USB
-
-# FireWire support
-device firewire # FireWire bus code
-#device sbp # SCSI over FireWire (Requires scbus and da)
-device fwe # Ethernet over FireWire (non-standard!)
-device fwip # IP over FireWire (RFC 2734,3146)
-device dcons # Dumb console driver
-device dcons_crom # Configuration ROM for dcons
|
|