Hi everyone
Below is my pciconf -lv output:
Code:
none1@pci0:0:31:3: class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
mskc0@pci0:2:0:0: class=0x020000 card=0x81421043 chip=0x436211ab rev=0x22 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '88E8053 Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller'
class = network
subclass = ethernet
none2@pci0:1:3:0: class=0x0c0010 card=0x815b1043 chip=0x8023104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TSB43AB21/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr'
class = serial bus
subclass = FireWire
I noticed that there are 2 "none"s.
Code:
none2@pci0:1:3:0: class=0x0c0010 card=0x815b1043 chip=0x8023104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TSB43AB21/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr'
class = serial bus
subclass = FireWire
none1@pci0:0:31:3: class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
How do I go about installing these drivers? I currently have no sound (gnome complains that there is "no volume control Gstreamer plugins and/or devices found".
Is this related to that?