Hi. I'm experiencing a strange problem for some time.
After an upgrade and after sysmerge for bringing my laptop to most recent -current, when I try to 'pkg_add -u' after a while I get a strange time out. The process hangs.
I couldn't find anything in the mailing lists, so I'm posting here.
dmesg:
Code:
OpenBSD 5.2 (GENERIC) #275: Tue Jul 24 09:36:18 MDT 2012
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,EST,TM2
real mem = 1063710720 (1014MB)
avail mem = 1035472896 (987MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/19/06, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
bios0: vendor IBM version "75ET60WW (2.06 )" date 12/19/2006
bios0: IBM 1867WEF
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1497 MHz: speeds: 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0x3f700000/0x80000
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: no ifp : irq 11
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 2
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): irq 11, address 00:16:d3:22:13:5a
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 4
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11
sdmmc0 at sdhc0
ath0 at pci2 dev 2 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: irq 11
ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6, WOR2W, address 00:16:cf:00:ed:c9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11, ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTC426040G9AT00>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (44cbc9ce5d88b0a3.a) swap on wd0b dump on wd0b
from netstat, I get this:
Code:
> netstat
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp 0 0 192.168.2.9.27008 147.52.159.12.ftp ESTABLISHED
tcp 0 0 192.168.2.9.11207 147.52.159.12.51820 FIN_WAIT_2
tcp 0 0 192.168.2.9.41926 147.52.159.12.54763 FIN_WAIT_2
tcp 0 0 192.168.2.9.27740 147.52.159.12.58781 FIN_WAIT_2
tcp 0 0 192.168.2.9.30638 147.52.159.12.53920 FIN_WAIT_2
tcp 0 0 192.168.2.9.17918 147.52.159.12.51652 FIN_WAIT_2
tcp 0 0 192.168.2.9.22867 147.52.159.12.53921 FIN_WAIT_2
tcp 0 0 192.168.2.9.45112 147.52.159.12.59715 FIN_WAIT_2
tcp 0 0 192.168.2.9.31213 147.52.159.12.56305 FIN_WAIT_2
tcp 0 0 192.168.2.9.19593 147.52.159.12.51013 FIN_WAIT_2
tcp 0 0 192.168.2.9.26907 147.52.159.12.57765 FIN_WAIT_2
tcp 0 0 192.168.2.9.23360 147.52.159.12.54911 FIN_WAIT_2
tcp 0 0 192.168.2.9.24735 147.52.159.12.58079 FIN_WAIT_2
tcp 0 0 192.168.2.9.36629 147.52.159.12.53321 FIN_WAIT_2
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address (state)
udp 0 0 192.168.2.9.35234 194.177.210.54.ntp
Active UNIX domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
0xd6a8844c stream 0 0 0x0 0xd1f3e440 0x0 0x0 /tmp/.X11-unix/X0
0xd6a8811c stream 0 0 0x0 0xd1f3e040 0x0 0x0 /tmp/.X11-unix/X0
0xd6a8800c stream 0 0 0x0 0xd1f16c40 0x0 0x0 /tmp/.X11-unix/X0
0xd6bc7dd8 stream 0 0 0xd6b23348 0x0 0x0 0x0 /tmp/.X11-unix/X0
0xd6bc7aa8 stream 0 0 0x0 0xd1f16cc0 0x0 0x0
0xd6bc7998 stream 0 0 0x0 0xd1f16c80 0x0 0x0
0xd6a88bbc dgram 0 0 0x0 0xd1ebc580 0x0 0xd1ef9040
0xd6a8866c stream 0 0 0xd69fb92c 0x0 0x0 0x0 /tmp/tmux-1000/default
0xd6a8877c stream 0 0 0x0 0xd1f33300 0x0 0x0
0xd6a8888c stream 0 0 0x0 0xd1f33b40 0x0 0x0
0xd6a8822c stream 0 0 0x0 0xd1f505c0 0x0 0x0
0xd6a8833c stream 0 0 0x0 0xd1f3e000 0x0 0x0
0xd6bc7ee8 stream 0 0 0x0 0xd1f33780 0x0 0x0
0xd6bc7888 stream 0 0 0xd6bbb97c 0x0 0x0 0x0 tabs/.sock
0xd6bc7778 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1eff640
0xd6bc7668 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1effd80
0xd6bc7558 stream 0 0 0xd6bbb364 0x0 0x0 0x0 /var/run/apmdev
0xd6bc7448 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1efff80
0xd6bc7228 stream 0 0 0xd6bd58dc 0x0 0x0 0x0 /tmp/aucat/aucat0
0xd6c9e554 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1ebcb40
0xd6c9e004 stream 0 0 0x0 0xd1ebc6c0 0x0 0x0
0xd6d08ee0 stream 0 0 0x0 0xd1ebc740 0x0 0x0
0xd6d08dd0 stream 0 0 0x0 0xd1ebc9c0 0x0 0x0
0xd6d08cc0 stream 0 0 0x0 0xd1ebc900 0x0 0x0
0xd6d08bb0 dgram 0 0 0x0 0xd1ebc580 0x0 0xd1ebcc00
0xd6d08aa0 dgram 0 0 0x0 0xd1ebc580 0x0 0x0
0xd6d08990 stream 0 0 0x0 0xd1ebcd00 0x0 0x0
0xd6d08880 stream 0 0 0x0 0xd1ebcbc0 0x0 0x0
0xd6d08770 stream 0 0 0x0 0xd1ebc440 0x0 0x0
0xd6d08660 stream 0 0 0x0 0xd1ebc400 0x0 0x0
0xd6d08550 dgram 0 0 0xd6cb39e4 0x0 0x0 0x0 /var/empty/dev/log
0xd6d08440 dgram 0 0 0xd6cb3948 0x0 0x0 0x0 /var/www/dev/log
0xd6d08330 dgram 0 0 0xd6cb38ac 0x0 0xd1f3e740 0x0 /dev/log
when I experience this kind of error, I ^C the pkg_add and resume again. After 1-2 tries, it completes.
I could not find anything relevant on the mailing lists. :/
This happens on laptop and desktop. Maybe somehow the router terminates the ftp session?
[edit]: forgot to mention:
- this happens also if I choose another ftp server
- pf.conf on laptop empty, on desktop just bruteforce table/rules