Code:
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 600 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF
real mem = 1609814016 (1535MB)
avail mem = 1572528128 (1499MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/03/04, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf8c40 (63 entries)
bios0: vendor Dell Computer Corporation version "A11" date 09/03/2004
bios0: Dell Computer Corporation Latitude D800
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP ASF!
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S1) USB1(S1) USB2(S1) USB3(S1) MODM(S3) PCIE(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpicpu0 at acpi0: C3, C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 90 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800!
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 600 MHz: speeds: 2000, 1800, 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX Go 5650" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5705M" rev 0x01, BCM5705 A1 (0x3001): irq 11, address 00:11:43:6d:11:f2
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 1
cbb0 at pci2 dev 1 function 0 "TI PCI7510 CardBus" rev 0x01: irq 11, CardBus support disabled
cbb1 at pci2 dev 1 function 1 "TI PCI7610 CardBus (Smart Card mode)" rev 0x01: irq 11, CardBus support disabled
"TI PCI7(4-6)10 FireWire" rev 0x00 at pci2 dev 1 function 2 not configured
vendor "TI", unknown product 0x8204 (class system subclass miscellaneous, rev 0x00) at pci2 dev 1 function 3 not configured
bwi0 at pci2 dev 3 function 0 "Broadcom BCM4309" rev 0x03: irq 11, address 00:90:4b:cd:a6:b4
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS548080M9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-6100A, 104D> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
rum0 at uhub0 port 3 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e
ugen0 at uhub1 port 2 "Dell Bluetooth" rev 2.00/12.66 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "USB USB Keykoard" rev 1.10/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "USB USB Keykoard" rev 1.10/1.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (77f3eca9aeacaeb2.a) swap on wd0b dump on wd0b
when I installed bwi firmware and set bwi0 interface I had this error line repeated endlessly after reboot .. the error reads :