View Single Post
  #6   (View Single Post)  
Old 30th March 2010
Mr-Biscuit Mr-Biscuit is offline
Banned
 
Join Date: May 2008
Posts: 272
Default

dmesg 2 after reboot
Code:
OpenBSD 4.7-current (GENERIC) #566: Sun Mar 28 03:35:16 MDT 2010
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem  = 1340112896 (1278MB)
avail mem = 1288212480 (1228MB)
User Kernel Config
UKC> disable acpi
478 acpi0 disabled
UKC> disable apm
358 apm0 disabled
UKC> e\^H \^Hquit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/05/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (59 entries)
bios0: vendor Dell Computer Corporation version "A03" date 01/05/2006
bios0: Dell Computer Corporation Dimension 3000
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
mpbios0: bus 0 is type PCI   
mpbios0: bus 1 is type PCI   
mpbios0: bus 2 is type ISA   
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeae0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19 (irq 10)
uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1 int 23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
emu0 at pci1 dev 2 function 0 "Creative Labs SoundBlaster Live" rev 0x07: apic 1 int 17 (irq 3)
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci1 dev 2 function 1 not configured
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int 20 (irq 10), address 00:11:11:27:09:e5
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2500JB-00REA0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-1100A, 108B> ATAPI 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8483B, B105> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 int 17 (irq 3)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x53: 256MB DDR SDRAM non-parity PC3200CL3.0
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 1 int 17 (irq 3), ICH5 AC97
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio1 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted

The card reader is still disconnected.
Reply With Quote