Thread: halt -p problem
View Single Post
  #7   (View Single Post)  
Old 29th June 2010
dmiparo dmiparo is offline
Real Name: Dmitry
New User
 
Join Date: Jun 2010
Location: Moscow, Russia
Posts: 3
Default

Thank you for your response. These are the contents of the dmesg.boot file:
Code:
OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul  9 21:32:39 MDT 2009
    deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
real mem  = 2074710016 (1978MB)
avail mem = 1997197312 (1904MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/13/08, SMBIOS rev. 2.4 @ 0xe5180 (33 entries)
bios0: vendor Hewlett-Packard version "F.24" date 08/13/2008
bios0: Hewlett-Packard Compaq Presario CQ60 Notebook PC
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SLIC BOOT SSDT SSDT
acpi0: wakeup devices LID0(S3) SLPB(S3) P32_(S0) KBD0(S3) PS2M(S3) PXSX(S5) PXSX(S4) EXP2(S4) PXSX(S4) EXP3(S4) PXSX(S4) EXP4(S4) PXSX(S4) EXP5(S4) PXSX(S4) EXP6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP4)
acpiprt6 at acpi0: bus -1 (EXP5)
acpiprt7 at acpi0: bus -1 (EXP6)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 120 degC
acpitz1 at acpi0: critical temperature 120 degC
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 not present
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: OVGA
acpivideo1 at acpi0: VGA_
acpivout0 at acpivideo1: CRT_
acpivout1 at acpivideo1: LCD_
acpivout2 at acpivideo1: TVO_
acpivout3 at acpivideo1: HDMI
bios0: ROM list: 0xc0000/0xfa00!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1666, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 18 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 19 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 4 int 17 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 18 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 4 int 22 (irq 11)
azalia0: codecs: Conexant CX20561, Intel/0x2802, using Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 4 int 21 (irq 11)
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102E (0x3480), apic 4 int 16 (irq 11), address 00:1d:72:7c:97:d7
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 4 int 20 (irq 11)
pci2 at ppb1 bus 2
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 17 (irq 11)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:23:4d:59:54:78
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 18 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 19 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 4 int 17 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 18 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 4 int 23 (irq 11), AHCI 1.2
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54321, FB2O> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7591S, 1.83> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 4 int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
"Intel 82801I Thermal" rev 0x03 at pci0 dev 31 function 6 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/58.87 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct removable
sd1: drive offline
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. CNF7047" rev 2.00/13.24 addr 3
uvideo0: video control not supported for this device.
video0 at uvideo0
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

Last edited by ocicat; 29th June 2010 at 05:15 AM. Reason: dmesg output is easier to read with [code] & [/code] tags
Reply With Quote