View Single Post
Old 19th August 2008
Onyx's Avatar
Onyx Onyx is offline
Background Process
 
Join Date: Aug 2008
Posts: 8
Default


FreeBSD 7.0-RELEASE #0: Sun Feb 24 10;35;36 UTC 2008
root@drisoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-56 (1795.51-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2
Features=0xl78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea50080d<SYSCALL,NX,MMX+,FFXSR,RDTSCP,L M,3DNow!+,3DNow!>
AMD Freatures2=0xlf<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 1994670080 (1902 MB)
avail memory = 1924513792 (1835 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmuxO
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpiO: <TOSCPL TOSCPLOO> on motherboard
ACPI Error (evregion-0427): No handler for Region [ERAM] (0xffffff000223e480) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_._REG] (Node 0xffffff000223bb80),AE_NOT_EXIST
acpiO: Could not initialize SystemIO handler: AE_NOT_EXIST
device_attach: acpiO attach returned 6
cpu0 on motherboard
powernow0: <PowerNow! K8> on cpu0
cpu0 on motherboard
powernow1: <PowerNow! K8> on cpu1
pcib0: <Host to PCI bridge> pci bus 0 on motherboard
pci0: <PCI bus> on pcibO
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcibl
vgapci0: <VGA-compatible displays port 0x9000-0x90ff mem 0xf0000000-0xf7ffffff,0xf8100000-0xf810ffff,0xf8000000-0xf80fffff irq 3 at device 5.0 on pcil
pcib2: <PCI-PCI bridge> at device 5.0 on pciO
pci8: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 6.0 on pciO
pcil4: <PCI bus> on pcib3
re0: <RealTek 8101E PCIe 10/100baseTX> port OxaOOO-OxaOff mem 0xf8300000-0xf8300
fff irq 3 at device 0.0 on pcil4
re0: Using 2 MSI messages
miibus0: <MII bus> on reO
rlphy0: RTL8201L 10/100 media interfaced PHY 1 on miibusO
rlphy: lObaseT, lObaseT-FDX, lOObaseTX, lOObaseTX-FDX, auto
re0: Ethernet address 00:16:d4:fe:lf:69
re0: [FILTER]
re0: [FILTER]
pcib4: <PCI-PCI bridge> at device 7.0 on pciO
pci20: <PCI bus> on pcib4
ath0: <Atheros 5424/2424> mem 0xf8200000-0xf820ffff irq 11 at device 0.0 on pci20
ath0: [ITHREAD]
ath0: unable to attach hardware; HAL status 13
device attach: ath0 attach returned 6
atapci0: <ATI ATA controller> port 0x8440-0x8447,0x8434-0x8437,0x8438-0x843f,0x8430-0x8433,0x840f mem 0xf870900-0xf87093ff irq11 at device 18.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xf8704000-0xf8704fff irq 10 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0:'OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> mem 0xf8705000-0xf8705fff irq 5 at device 19.1 on pciO
ohci1: [GIANT-LOCKED]
ochi1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xf8706000-0xf8706fff irq 3 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xf8707000-0xf8707fff irq 5 at device 19.3 on pciO
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <0HCI (generic) USB controller> on ohci3
ususb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xf8708000-0xf8708fff irq 3 at device 19.4 on pciO
ohci4: ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: >EHCI (generic) USB 2.0 controller> mem 0xf8709400-0xf87094ff irq 11 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: waiting for BIOS to give up control
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usbO usbl usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehciO
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
umass0: <USB DISK 2.0, class 0/0, rev 2.00/4.03, addr2> on uhub5
ugen0: <Chicony Electronics Co., Ltd. Chicony USB 2.0 Camera, class 239/2, rev 2.00/3.35, addr 3> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 cotroller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <PCI-PCI bridge> at device 20.4 on pci0
pci26: <PCI bus> on pcib5
cbb0: <PCI-CardBus Bridge> mem 0xf8404000-0xf8404fff irq 11 at device 4.0 on pci26
cardbus0: <CardBus bus> on cbb0
pccard0: <16 bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <1394 Open Host Controller Interface> mem 0xf8406000-0xfn406/ff,0xf8400000-0xf8403fff irq 11 at device 4.1 on pci26
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohciO: No. of Isochronous channels is 4.
fwohciO: EUI64 00:02:3f:75:c0:40:12:3c
fwohci Phy 1394a available S400, max_rec 2048 bytes.
firewireO: <IEEE1394(FireWire) bus> on fwohciO
dcons_cromO: <dcons configuration ROM> on firewireO
dcons_cromO: bus_addr 0x740a4000
fwe0: <Ethernet over FireWire> on firewire0
if_few0: Fake Ethernet address: 02:02:3f:40:12:3c
fwe0: Ethernet address: 02:02:3f:40:12:3c
fwip0: <IP over FireWire> on firewireO
fwip0: Firewire address: 00:02:3f:75:c0:40:12:3c @ OxfffeOOOOOOOO, S400, maxrec 2048
sbp0: SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen-1, CYCLEMASTER mode
pci26: <mass storage> at device 4.2 (no driver attached)
pci26: <base peripheral> at device 4.3 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isaO
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdO at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdcO
psm0: [GIANT-LOCKED]
psm0: ITHREAD]
psm0: model GlidePoint, deice ID 0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem OxaOOOO-Oxbffff on isa0
Timecounters tick every 1.00 msec
htprr: no controller detected.
firewire0: i nodes, maxhop <= 0, cable IRM - 0 (me)
firewire0: bus manager 0 (me)
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80bc6c08
acd0: DVDR <PIONEER DVD-RWDVRK17LF/4.53> at ata0-master UDMA33
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_LiveFS
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/md0




Unfortunately, the install disc didn't recognize my USB drive,
so I had to print out dmesg and OCR it. Here are the error messages from that:

umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: Invalid CSW: tag 1 should be 2
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: Invalid CSW: tag 3 should be 4
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
__________________
Signatures suck
Reply With Quote