Does this help?
Code:
ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1e:2a:49:aa:15
priority: 0
media: Ethernet autoselect (100baseTX half-duplex)
status: no carrier
xl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:01:03:1a:d0:22
priority: 0
media: Ethernet autoselect (none)
status: no carrier
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0c:f1:88:b1:3f
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::20c:f1ff:fe88:b13f%fxp0 prefixlen 64 scopeid 0x3
inet 192.168.1.104 netmask 0xffffff00 broadcast 255.255.255.255
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
priority: 0
groups: pflog
Code:
route -n show -inet
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.1.1 UGS 0 246 - 8 fxp0
127/8 127.0.0.1 UGRS 0 0 33200 8 lo0
127.0.0.1 127.0.0.1 UH 2 0 33200 4 lo0
192.168.1/24 link#3 UC 2 0 - 4 fxp0
192.168.1.1 94:0c:6d:ee:f8:b6 UHLc 2 37 - 4 fxp0
192.168.1.100 00:1f:e2:61:92:6c UHLc 1 2723 - 4 fxp0
192.168.1.104 127.0.0.1 UGHS 0 0 33200 8 lo0
224/4 127.0.0.1 URS 0 0 33200 8 lo0