Hello this is my second day fight .OpenBSD isn't for everyone.
LeFrettchen this issue was diffrent my OpenBSD works .Problem was with KDE I can't change resolution .I like low resolution because my fan from my computer work slow and not make noise.And the Graph card was different .Now I have new one Gforefce GTX 950 Processor Intel i7.And I have 4 core .Disc SSD .Intel i7 has his own graphics card .But this card is not good .
Code:
OpenBSD 6.2 (RAMDISK_CD) #165: Tue Oct 3 20:05:31 MDT 2017
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz ("GenuineIntel" 686-class) 3.51 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
real mem = 3375058944 (3218MB)
avail mem = 3301220352 (3148MB)
mainbus0 at root
bios0 at mainbus0: date 05/03/12, SMBIOS rev. 2.7 @ 0xee7f0 (26 entries)
bios0: vendor American Megatrends Inc. version "P2.90M" date 06/09/2015
bios0: ASRock Z77 Extreme4
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT AAFT HPET SSDT SSDT SSDT BGRT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus 3 (RP04)
acpiprt6 at acpi0: bus 4 (RP05)
acpiprt7 at acpi0: bus 5 (RP06)
acpiprt8 at acpi0: bus 6 (BR40)
acpiprt9 at acpi0: bus -1 (RP07)
acpiprt10 at acpi0: bus 7 (RP08)
acpiprt11 at acpi0: bus 1 (PEG0)
acpiprt12 at acpi0: bus -1 (PEG1)
acpiprt13 at acpi0: bus -1 (PEG2)
acpiprt14 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu at acpi0 not configured
"INT3F0D" at acpi0 not configured
"pnp0c14" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"INT33A0" at acpi0 not configured
bios0: ROM list: 0xc0000/0xe600
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: apic 2 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x1402 rev 0xa1
vga1: aperture needed
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
vendor "NVIDIA", unknown product 0x0fba (class multimedia subclass hdaudio, rev 0xa1) at pci1 dev 0 function 1 not configured
"Intel HD Graphics 3000" rev 0x09 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 19
pci3 at ppb2 bus 3
ahci0 at pci3 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x01: msi, AHCI 1.2
ahci0: port 1: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, ADATA SP900, C3G> SCSI3 0/direct fixed naa.0000000000000000
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
ppb3 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 16
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM57781" rev 0x10, BCM57765 B0 (0x57785100): msi, address bc:5f:f4:4b:63:3e
brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 4
ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 17
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci6 at ppb5 bus 6
ppb6 at pci0 dev 28 function 7 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 19
pci7 at ppb6 bus 7
xhci1 at pci7 dev 0 function 0 "ASMedia ASM1042 xHCI" rev 0x00: msi
usb2 at xhci1: USB revision 3.0
uhub2 at usb2 configuration 1 interface 0 "ASMedia xHCI root hub" rev 3.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb3 at ehci1: USB revision 2.0
uhub3 at usb3 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Z77 LPC" rev 0x04
ahci1 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci1: port 3: 1.5Gb/s
scsibus1 at ahci1: 32 targets
cd0 at scsibus1 targ 3 lun 0: <TSSTcorp, CDDVDW SH-222BB, SB00> ATAPI 5/cdrom removable
"Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech G100s Optical Gaming Mouse" rev 2.00/82.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhub4 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
uhub5 at uhub3 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub4 port 3 configuration 1 interface 0 "TOSHIBA TransMemory" rev 2.10/1.10 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <TOSHIBA, TransMemory, PMAP> SCSI4 0/direct removable serial.09306545E0C070020486
sd1: 7446MB, 512 bytes/sector, 15249408 sectors