Just got a shiny new HP Elitebook Folio 9470m.
Had a bit of a rough time installing, as it has no optical drive. My first attempt at installing via USB drive failed at the USB drive itself. Since my office has a FOG server, I put the ISO up there and installed via PXE/RAMDisk.
The first boot after that, it couldn't find /bsd. After some investigation, it seems that bsd.tgz and etc.tgz had failed to install. Third time the charm and I've got XFCE, Firefox, and starting to install other pkgs 
Code:
OpenBSD 5.3 (GENERIC.MP) #51: Wed Feb 27 13:52:32 MST 2013
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
real mem = 3096952832 (2953MB)
avail mem = 3035357184 (2894MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/31/11, SMBIOS rev. 2.7 @ 0xb9c3f000 (33 entries)
bios0: vendor Hewlett-Packard version "68IBD Ver. F.32" date 12/05/2012
bios0: Hewlett-Packard HP EliteBook Folio 9470m
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT SLIC MSDM FPDT BGRT SSDT SSDT ASF!
acpi0: wakeup devices LANC(S5) EHC1(S3) EHC2(S3) XHC_(S3) PCIB(S5) RP02(S4) ECF0(S4) RP03(S4) RP04(S5) WNIC(S5) RP06(S5) NIC_(S5) RP07(S4) RP08(S4) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus -1 (PCIB)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus 3 (RP04)
acpiprt5 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpicpu2 at acpi0: C2, C1, PSS
acpicpu3 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpitz0 at acpi0: critical temperature is 128 degC
acpitz1 at acpi0acpitz1: GFXZ: failed to read _TMP
acpitz2 at acpi0: critical temperature is 128 degC
acpitz3 at acpi0: critical temperature is 128 degC
acpitz4 at acpi0: critical temperature is 128 degC
acpitz5 at acpi0: critical temperature is 128 degC
acpitz6 at acpi0acpitz6: DM1Z: failed to read _TMP
acpitz7 at acpi0acpitz7: DM2Z: failed to read _TMP
acpibat0 at acpi0: BAT0 model "Primary" serial XXXX 2012/12/23 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
bios0: ROM list: 0xc0000/0xee00 0xcf000/0x1000 0xd0000/0x1000
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1701, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 782 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 0 int 16
drm0 at inteldrm0
"Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address XX:XX:XX:XX:XX
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: IDT/0x76e0, Intel/0x2806, using IDT/0x76e0
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 17
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 18
pci2 at ppb1 bus 2
"JMicron SD/MMC" rev 0x30 at pci2 dev 0 function 0 not configured
sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x30: apic 0 int 18
sdmmc0 at sdhc0
ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 19
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev 0x24: msi, MIMO 2T2R, AGN, address c8:f7:33:92:fb:3f
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72505, GH2O> SCSI3 0/direct fixed naa.5000xxxxxxxxx
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 1 "Validity Sensors product 0x003d" rev 1.10/1.04 addr 3
uvideo0 at uhub2 port 3 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. HP HD Webcam [Fixed]" rev 2.00/17.59 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
urtwn0 at uhub3 port 2 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 3
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address xx:xx:xx:xx:xx
ugen1 at uhub3 port 6 "Intel product 0x07da" rev 2.00/78.69 addr 4
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
So far only issue is the trackpad is a bit over sensitive 
|