Hi all,
considered posting this in installation and upgrading, but I did neither. Feel free to move it should it make sense to do so.
I moved an existing OpenBSD 4.4 system on two ide drives to a new motherboard, yet the same 3 3com 905ctx cards. After telling my bios to use disk-1 I was proceeding forward nicely. However, when it was done booting, I had the request to tell it what shell to boot. Both disks seem to be recognized well. However, they are "not configured". Below is my dmesg gained by using a keyspan usb serial adapter on a mac running minicom and a "set tty com0" to capture the text
Code:
# dmesg
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Unknown CPU Typ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.11 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,ME
real mem = 1039691776 (991MB)
avail mem = 996839424 (950MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/28/04, BIOS32 rev. 0 @ 0xfb990, SMBIOS)
bios0: vendor Phoenix Technologies, LTD version "ASUS A7V8X-MX SE ACPI BIOS Rev4
bios0: ASUS A7V8X-MX SE
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd8d4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd830/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x7e00 0xc8000/0x8000! 0xd0000/0x800 0xd1000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: v3, aperture at 0xe0000000, size 0xf000000
drm at vga1 unsupported
xl0 at pci0 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 11, addressc
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci0 dev 9 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5, address 4
bmtphy1 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 7
xl2 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 10, addres4
bmtphy2 at xl2 phy 24: Broadcom 3C905C internal PHY, rev. 6
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2300CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2100CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel y
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV1204H>
wd0: 16-sector PIO, LBA, 114498MB, 234493056 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <IBM-DPTA-371360>
wd1: 16-sector PIO, LBA, 13042MB, 26712000 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address 00:11:21
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x0040632
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff6d netmask ff6d ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 " USB Keyboard" rev 1.10/1.2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 " USB Keyboard" rev 1.10/1.2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
softraid0 at root
root on wd1a swap on wd1b dump on wd1b