View Single Post
Old 11th December 2014
pawaan pawaan is offline
Fdisk Soldier
 
Join Date: Jan 2013
Posts: 82
Default

NetBSD 7.0 BETA amd64 on HP 625
Code:
kern.version = NetBSD 7.0_BETA (GENERIC.201412092240Z)
dmesg
Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_BETA (GENERIC.201412092240Z)
total memory = 3836 MB
avail memory = 3709 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0xbf<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP 625 ( )
mainbus0 (root)
ACPI: RSDP 0xf2aa0 000014 (v00 HPQOEM)
ACPI: RSDT 0xafefe038 00003C (v01 HPQOEM SLIC-MPC 00000003      01000013)
ACPI: FACP 0xafefd000 000074 (v01 HPQOEM 307E     00000003 HP   00000001)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/tbfadt-664)
ACPI: DSDT 0xafede000 01B406 (v01 HPQOEM   SB700  00000001 INTL 20060912)
ACPI: FACS 0xafe8f000 000040
ACPI: APIC 0xafefc000 000084 (v01 HPQOEM 307E     00000001 HP   00000001)
ACPI: MCFG 0xafefb000 00003C (v01 HPQOEM 307E     00000001 HP   00000001)
ACPI: SLIC 0xafefa000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: HPET 0xafedb000 000038 (v01 HPQOEM 307E     00000001 HP   00000001)
ACPI: SSDT 0xafeda000 000386 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: AMD Athlon(tm) II P360 Dual-Core Processor, id 0x100f63
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1: AMD Athlon(tm) II P360 Dual-Core Processor, id 0x100f63
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000003>, AslId <    ,01000013>
ACPI Error: No handler for Region [ECRM] (0xfffffe813ed03740) [EmbeddedControl] (20131218/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131218/exfldio-323)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/psparse-553)
ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/uteval-113)
ACPI Error: No handler for Region [ECRM] (0xfffffe813ed03740) [EmbeddedControl] (20131218/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131218/exfldio-323)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/psparse-553)
ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node 0xfffffe813ed0cc70), AE_NOT_EXIST (20131218/uteval-113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpivga0 at acpi0 (IGFX): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: 0 5 10 15 20 25 30 33 36 40 43 46 50 55 60 65 70 75 80 83 86 90 93 96 100
acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0210): ACPI Display Output Device
acpiout4 at acpivga0 (DD04, 0x0220): ACPI Display Output Device
acpiout5 at acpivga0 (DD05, 0x0230): ACPI Display Output Device
acpiout6 at acpivga0 (DD06, 0x0240): ACPI Display Output Device
acpiout7 at acpivga0 (DD07, 0x0250): ACPI Display Output Device
acpiout8 at acpivga0 (DD08, 0x0260): ACPI Display Output Device
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0, bios detect
acpivga0:   0x0220 (acpiout4): Unknown Output Device, head 0, bios detect
acpivga0:   0x0230 (acpiout5): Unknown Output Device, head 0, bios detect
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MBRL (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0177) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LIon rechargeable battery
acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (CPUZ): cpu0 cpu1
acpitz0: active cooling level 0: 88.0C
acpitz0: active cooling level 1: 80.0C
acpitz0: active cooling level 2: 69.0C
acpitz0: active cooling level 3: 57.0C
acpitz0: active cooling level 4: 48.0C
acpitz0: levels: critical 108.0 C, passive 100.0 C
acpitz1 at acpi0 (TZ3): cpu0 cpu1
acpitz1: levels: critical 108.0 C, passive 55.0 C, passive cooling
ACPI: Enabled 5 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.4
pms0: Extended W mode, Palm detect, Multi-finger Report
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x103c product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9712 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon Mobility HD 4200
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS690/780 HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 4 function 0: vendor 0x1022 product 0x9604 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb1: link is x1 @ 2.5Gb/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 78:e3:b5:49:13:b1
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 7 function 0: vendor 0x1022 product 0x9607 (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 9 function 0: vendor 0x1022 product 0x9608 (rev. 0x00)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb3: link is x1 @ 2.5Gb/s
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x4727 (miscellaneous network, revision 0x01) at pci4 dev 0 function 0 not configured
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xf732ff01<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
iic1 at piixpm0: I2C bus
iic2 at piixpm0: I2C bus
iic3 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Sigmatel 92HD88B1
hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg1: ADC01 2ch: Mic In [Jack]
hdafg1: ADC02 2ch: Mic In [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
ppb4 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci5 at ppb4 bus 7
pci5: i/o space, memory space enabled
ohci2 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ohci3 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb5 at ohci3: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci3
usb6 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  9900 mW, 2300 MHz
acpicpu0: P1: FFH, lat   4 us, pow  5973 mW, 1700 MHz
acpicpu0: P2: FFH, lat   4 us, pow  2177 mW,  800 MHz
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2295193690 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
uhub6 at usb6: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST9250315AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp       CDDVDW TS-L633R, R82M6GNB144255, 0300> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ubt0 at uhub2 port 4
ubt0: Broadcom Corp Broadcom 2070 Bluetooth, rev 2.00/4.81, addr 2
uvideo0 at uhub1 port 5 configuration 1 interface 0: Foxlink HP Webcam [2 MP Fixed], rev 2.00/1.06, addr 2
video0 at uvideo0: Foxlink HP Webcam [2 MP Fixed], rev 2.00/1.06, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic0 pin 18
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic0 pin 18
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic0 pin 18
info: [drm] Resetting GPU
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] Resetting GPU
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
hdafg1: unsol: tag=0
Reply With Quote