View Single Post
Old 30th December 2017
philo_neo71 philo_neo71 is offline
Spam Deminer
 
Join Date: Jul 2009
Posts: 278
Default

I redid an installation of OpenBSD,
I do not dare to do startx because it will crash
My laptop is a lenovo SL510.

Quote:
dmesg
OpenBSD 6.2 (GENERIC.MP) #166: Tue Oct 3 19:58:05 MDT 2017
deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XS AVE,LAHF,PERF,SENSOR
real mem = 3048439808 (2907MB)
avail mem = 2975920128 (2838MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/19/12, BIOS32 rev. 0 @ 0xfdbf0, SMBIOS rev. 2.5 @ 0xe0010 (44 entries)
bios0: vendor LENOVO version "6JET94WW (1.52 )" date 06/19/2012
bios0: LENOVO 2847Q5G
acpi0 at bios0: rev 4
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XS AVE,LAHF,PERF,SENSOR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 9 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus 5 (RP04)
acpiprt7 at acpi0: bus 6 (RP05)
acpiprt8 at acpi0: bus 8 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 105 degC
"LEN0017" at acpi0 not configured
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "42T4753" serial 8762 type LION oem "Panasonic"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD03
bios0: ROM list: 0xc0000/0xfc00! 0xd0000/0x1000 0xe0000/0x2000! 0xe2000/0x1800!
cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2133, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Realtek ALC269, Intel/0x2802, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 17
pci1 at ppb0 bus 2
"JMicron SD/MMC" rev 0x00 at pci1 dev 0 function 0 not configured
sdhc0 at pci1 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 2 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit
"JMicron Memory Stick" rev 0x00 at pci1 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci1 dev 0 function 4 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int 16
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int 18
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int 19
pci4 at ppb3 bus 5
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi, MIMO 1T2R, BGS, address 00:26:c7:0c:f2:68
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int 17
pci5 at ppb4 bus 6
ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 2 int 16
pci6 at ppb5 bus 8
re0 at pci6 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), msi, address 00:26:9e:e4:13:93
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci7 at ppb6 bus 9
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS541010A9, JA0O> SCSI3 0/direct fixed naa.5000cca793ed4068
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <Slimtype, DVD A DS8ACSH, LP56> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: se97
sdtemp1 at iic0 addr 0x1a: mcp98243
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM with thermal sensor
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM with thermal sensor
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uvideo0 at uhub1 port 6 configuration 1 interface 0 "Ricoh Company Ltd. Integrated Camera" rev 2.00/10.15 addr 2
video0 at uvideo0
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Compx 2.4G Receiver" rev 1.10/10.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Compx 2.4G Receiver" rev 1.10/10.01 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhidev2 at uhub5 port 1 configuration 1 interface 2 "Compx 2.4G Receiver" rev 1.10/10.01 addr 2
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (9f2e5b00dd763f4f.a) swap on sd0b dump on sd0b
#
Reply With Quote