Hi,
Since yesterday night my system has been reacting very slowly without I could find out why.
In fact, If I unplugged the network cable (leading to the Internet Box) or stop dhclient then everything is back to normal.
For example, opening programms like Keepass, Terminal, Gvim may take up to 10s and surfing the Net is dead slow.
The same thing happens with my netbook.
I changed dhcp for statics address whithout any success.
I thought it was due to my Internet Box, but my third netbook with FreeBSD is not affected by this behavior and I wonder why it affects programs that don't connect to Internet.
Example while opening Keepass :
Code:
$ keepassx & vmstat 2 10
[1] 8129
procs memory page disks traps cpu
r b w avm fre flt re pi po fr sr sd0 sd1 int sys cs us sy id
2 1 0 349352 10955632 181 0 0 0 0 0 1 1 11 3156 340 1 1 98
0 1 0 353912 10950296 3191 0 0 0 0 0 0 0 9 12194 437 7 1 91
1 1 0 353928 10950280 42 0 0 0 0 0 0 0 4 1592 223 0 0 100
0 1 0 353912 10950296 45 0 0 0 0 0 0 0 16 1630 247 0 0 100
0 1 0 353920 10950288 41 0 0 0 0 0 0 0 6 1602 228 0 0 99
0 1 0 353912 10950296 41 0 0 0 0 0 0 0 4 1721 226 0 0 100
0 1 0 353936 10950272 45 0 0 0 0 0 0 0 15 1621 231 0 0 100
0 1 0 353948 10950260 44 0 0 0 0 0 0 0 3 1710 216 1 0 99 -> Keepass opens here
1 1 0 353928 10950280 40 0 0 0 0 0 0 0 0 1498 212 0 0 100
0 1 0 365496 10938340 4845 0 0 0 0 0 0 0 2 17389 1291 9 4 87
$ uname -a
OpenBSD LNBoX.my.domain 5.4 GENERIC.MP#0 amd64
$ ifconfig re0
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::1e6f:65ff:fe81:bfe4%re0 prefixlen 64 scopeid 0x1
inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255
$ netstat -ni
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Colls
lo0 33144 <Link> 14 0 14 0 0
lo0 33144 ::1/128 ::1 14 0 14 0 0
lo0 33144 fe80::%lo0/ fe80::1%lo0 14 0 14 0 0
lo0 33144 127/8 127.0.0.1 14 0 14 0 0
re0 1500 <Link> 24214 0 22226 0 0
re0 1500 fe80::%re0/ fe80::1e6f:65ff:f 24214 0 22226 0 0
re0 1500 192.168.0/2 192.168.0.10 24214 0 22226 0 0
enc0* 0 <Link> 0 0 0 0 0
pflog0 33144 <Link> 0 0 0 0 0
$ dmesg|grep re0
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 2 int 18,
I didn't find errors in /var/log and I didn't change anything in the system.
Any ideas ?
Thank you