View Single Post
  #8   (View Single Post)  
Old 16th July 2009
jimnms jimnms is offline
New User
 
Join Date: Jul 2009
Posts: 4
Default

I learned that it's detecting the SD card reader as sd0, even if I disable it in the BIOS.

I would have posted the dmesg earlier, but I was having a hard time getting my USB drive to mount so I could write it to something. When I inserted the USB drive, it would report:
umass1 at uhub0 port 4 confguration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/2.00 addr3
umass: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable
sd1: 3852MB, 512 bytes/sec, 7888896 sec total

The USB drive was already formatted with Fat32, and if tried to view the disk info with fdisk or disklabel, both of those would come back with a "sd1: no such file or directory" error.

Finally after booting up with the USB drive plugged in I was able to mount it and write the dmesg output on it:

Code:
OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 1064398848 (1015MB)
avail mem = 1022562304 (975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/11/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf06e0 (37 entries)
bios0: vendor American Megatrends Inc. version "1302" date 03/11/2009
bios0: ASUSTeK Computer INC. 701
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB MCFG
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 70MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
bios0: ROM list: 0xc0000/0xf800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16 (irq 5)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17 (irq 11)
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 int 17 (irq 11), address 00:1e:8c:99:be:c0
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI 0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18 (irq 10)
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23 (irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19 (irq 7)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18 (irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
uhub0: device problem, disabling port 2
umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable
sd0: 3852MB, 512 bytes/sec, 7888896 sec total
umass1 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev 2.00/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct removable
sd1: drive offline
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
When I boot from the CD, this is what shows up at the boot prompt:
CD-ROM: EF
Loading /4.5/I386/CDBOOT
probing: pc0 apm pci mem[635K 1014M a20=on]
disk: hd0+ cd0
>> OpenBSD/i386 CDBOOT 2.02
boot>
I'm guessing that "uhub0: device problem, disabling port 2" is why it's not seeing the CD after boot. I'm going to try coping the 4.5/I386 directory to my USB drive and see if it will copy the install files from it.
Reply With Quote