zyd0: no link ........... sleeping
Hello!
I have just installed 4.7 stable and I'm completely crazy that I cant get my wireless usb stick to get contact with the AP.
I Use a Zyxel G-202 which seems to work fine with Zydas driver.
Dmesg gives this:
zyd0 at uhub0 port 3 configuration 1 interface 0 "Zydas Zyxel G-202" rev 2.00/48.10 addr 2
.
.
zyd0: HMAC ZD1211, FW 46.05, RF AL2230, PA 0, address 00:13:49:8 f: bc: 0C
And usbdevs -vd :
Controller /dev/usb0:
adres 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
uhub0:
port 1 powered
port 2 powered
port 3 addr 2: high speed, power 500 mA, config 1, ZyXEL G-202(0x3410), ZyDAS(0x0586), rev 48.10
zyd0
port 4 powered
port 5 powered
port 6 powered
in hostname.zyd0 I have written the following (after reading ZYD(4))
dhcp NONE NONE NONE chan 11
when the network starts, I get this from dhclient:
zyd0: no link ......................... sleeping
If I search with ifconfig, you will find on my AP:
$ sudo ifconfig zyd0 scan
zyd0: flags = 8843 mtu 1500 <UP, BROADCAST,RUNNING,SIMPLEX,MULTICAST>
lladdr 00:13:49:8 f: bc: 0C
priority: 4
Group: WLAN
media: IEEE802.11 select auto (DS1 mode 11g)
status: no network
ieee80211: nwid Binah chan 11 BSSID 00:1 f: 9f: 78: a1: bb 23dB 100dBm
Binah chan 11 nwid BSSID 00:1 f: 9f: 78: a1: bb 18db 54M short_slottime
Regardless of whether I configure zyd0 according to the scaned data or run "sudo dhclient zyd0" directly, I get the same answer from dhclient.
I have tried with and without WEP encryption. I can get it to work with ifconfig in linux on the same computer.
Please help me...
|