Sure thing. Here's `df -h` right before extracting the sets:
Code:
Filesystem Size Used Avail Capacity Mounted on
/dev/rd0a 3.5M 3.1M 317K 91% /
/dev/sd0a 1005M 462M 492M 48% /mnt
/dev/sd0k 40.0G 266M 37.8G 1% /mnt/home
/dev/sd0d 3.9G 12.0K 3.7G 0% /mnt/tmp
/dev/sd0f 2.0G 1.0G 865M 55% /mnt/usr
/dev/sd0g 1005M 184M 770M 19% /mnt/usr/X11R6
/dev/sd0h 8.6G 676M 7.5G 8% /mnt/usr/local
/dev/sd0j 2.0G 2.0K 1.9G 0% /mnt/usr/obj
/dev/sd0i 2.0G 2.0K 1.9G 0% /mnt/usr/src
/dev/sd0e 8.7G 15.9M 8.3G 0% /mnt/var
/dev/sd4a 5.3T 799G 4.3T 15% /mnt/storage
...and this is `df -h` after the partition fills up. It happens in the middle of extracting base62.tgz, starts throwing "device is full" errors.
Code:
Filesystem Size Used Avail Capacity Mounted on
/dev/rd0a 3.5M 3.5M 1.0K 100% /
/dev/sd0a 1005M 462M 492M 48% /mnt
/dev/sd0k 40.0G 266M 37.8G 1% /mnt/home
/dev/sd0d 3.9G 12.0K 3.7G 0% /mnt/tmp
/dev/sd0f 2.0G 1.1G 797M 58% /mnt/usr
/dev/sd0g 1005M 184M 770M 19% /mnt/usr/X11R6
/dev/sd0h 8.6G 676M 7.5G 8% /mnt/usr/local
/dev/sd0j 2.0G 2.0K 1.9G 0% /mnt/usr/obj
/dev/sd0i 2.0G 2.0K 1.9G 0% /mnt/usr/src
/dev/sd0e 8.7G 15.9M 8.3G 0% /mnt/var
/dev/sd4a 5.3T 799G 4.3T 15% /mnt/storage