Below is dmesg with apm disabled (as you see I plugged in my flashcard again, since it seems not to be the problem):
While I'm here I'd like to ask a general question: if I understand right, if I will have a machine with 2g of ram, I should have a swap or 4g+ and a /var partition that always has at least as much free available to be safe?
The installation faq doesn't seem to appreciate swap space very much.
Code:
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 449 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 200785920 (191MB)
avail mem = 185978880 (177MB)
User Kernel Config
UKC> disable apm
321 apm0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/11/99, BIOS32 rev. 0 @ 0xfd790, SMBIOS rev. 2.2 @ 0xf0850 (38 entries)
bios0: vendor Phoenix Technologies LTD version "CL.M7.13" date 11/11/99
bios0: Hewlett-Packard HP OmniBook PC
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP
acpi0: wakeup devices LID_(S3) COM1(S3) BAT1(S3) BAT2(S3) PX42(S2)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpitz0: THRM: failed to read _AC0
acpitz0: THRM: failed to read _PSV
acpibtn0 at acpi0: LID_
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 not present
acpibat1 at acpi0: BAT2 not present
acpidock at acpi0 not configured
bios0: ROM list: 0xc0000/0xc800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 4 function 0 "TI PCI1225 CardBus" rev 0x01: irq 10, CardBus support disabled
cbb1 at pci0 dev 4 function 1 "TI PCI1225 CardBus" rev 0x01: irq 10, CardBus support disabled
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
wd0: 16-sector PIO, LBA, 4887MB, 10009440 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL2
maestro0 at pci0 dev 8 function 0 "ESS Maestro 2E" rev 0x10: irq 10
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at maestro0
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000a10
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ed65 netmask ed65 ttymask ffe7
mtrr: Pentium Pro MTRR support
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000a10
cbb0: bad Vcc request. sock_ctrl 0x33, sock_status 0x30000a10
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000a19
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000a10
cbb0: bad Vcc request. sock_ctrl 0x33, sock_status 0x30000a10
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000a19
wdc2 at pcmcia0 function 0 "TS128MFLASHCP, , "cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000a10
cbb0: bad Vcc request. sock_ctrl 0x33, sock_status 0x30000a10
port 0xa000/16
wd1 at wdc2 channel 0 drive 0: <Hitachi CVM1.1.1>
wd1: 1-sector PIO, LBA, 122MB, 250368 sectors
wd1(wdc2:0:0): using BIOS timings
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
umass0 at uhub0 port 1 configuration 1 interface 0 "USB Flash Disk" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
sd0 at scsibus0 targ 1 lun 0: <Aigo USB, Storage Device, 2.00> SCSI2 0/direct removable
sd0: 125MB, 15 cyl, 255 head, 63 sec, 512 bytes/sec, 256000 sec total
msdosfs: reducing max cluster to 126975 from 126976 due to FAT size