View Single Post
  #1   (View Single Post)  
Old 16th June 2012
daemonfowl daemonfowl is offline
bsdstudent
 
Join Date: Jan 2012
Location: DaemonLand
Posts: 834
Default linear framebuffer access unavailable .. Caught signal 11 (Segmentation fault)

Hi everybody!

I upgraded OpenBSD-5.1 from stable to current .. after sysmerging I was asked what to do .. I chose m (merge) and i (install) instead of default option (leaving files until later for manual editing)

After reboot I couldn't start X :
Xorg.0.log
Code:
    70.025] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
	(Operation not permitted)
	Check that you have set 'machdep.allowaperture=1'
	in /etc/sysctl.conf and reboot your machine
	refer to xf86(4) for details
[    70.025] 	linear framebuffer access unavailable
[    70.025] Segmentation fault at address 0x0
[    70.026] 
Fatal server error:
[    70.026] Caught signal 11 (Segmentation fault). Server aborting
[    70.026] 
[    70.026] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    70.026] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    70.026] 
[    70.027] Server terminated with error (1). Closing log file.
dmesg
Code:
OpenBSD 5.1-current (GENERIC.MP) #277: Tue Jun 12 18:40:02 MDT 2012
    todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2250 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM
real mem  = 2145447936 (2046MB)
avail mem = 2099544064 (2002MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/13/07, BIOS32 rev. 0 @ 0xfd390, SMBIOS rev. 2.33 @ 0xe3810 (25 entries)
bios0: vendor Acer version "V3.50" date 02/13/2007
bios0: Acer Aspire 5610
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG SLIC DBGP APIC BOOT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PXS1(S4) PXS2(S4) BCOL(S4) PXS4(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S5) MODM(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2250 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus 5 (RP04)
acpiprt6 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 85 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpibat0 at acpi0: BAT1 model "GC86503SY90 " type Lion oem "SONY "
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: GFX0
bios0: ROM list: 0xc0000/0xe000 0xce000/0x1800 0xe0000/0x1800! 0xe3800/0x800!
cpu0: Enhanced SpeedStep 1730 MHz: speeds: 1733, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 Go" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC883, Conexant/0x2c06, using Realtek ALC883
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 19
pci5 at ppb4 bus 5
wpi0 at pci5 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:19:d2:28:eb:bc
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci6 at ppb5 bus 6
bce0 at pci6 dev 1 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 21, address 00:16:d4:d2:d6:5e
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
cbb0 at pci6 dev 4 function 0 "ENE CB-712 CardBus" rev 0x10: apic 1 int 16
"ENE Memory Stick" rev 0x01 at pci6 dev 4 function 1 not configured
sdhc0 at pci6 dev 4 function 2 "ENE SD Controller" rev 0x01: apic 1 int 17
sdmmc0 at sdhc0
"ENE Flash memory" rev 0x01 at pci6 dev 4 function 3 not configured
"ENE SD/MMC" rev 0x01 at pci6 dev 4 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST96812AS>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7590A, 1.04> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Logitech product 0x09b0" rev 2.00/0.06 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (752aa17f57263e9e.a) swap on wd0b dump on wd0b
wpi0: fatal firmware error
firmware error log (count=1):
  error type = "SYSASSERT" (0x00000005)
  error data      = 0x00000074
  branch link     = 0x000008B600000274
  interrupt link  = 0x0000032000003560
  time            = 1618370039
driver status:
  tx ring  0: qid=0  cur=4   queued=0  
  tx ring  1: qid=1  cur=0   queued=0  
  tx ring  2: qid=2  cur=0   queued=0  
  tx ring  3: qid=3  cur=0   queued=0  
  tx ring  4: qid=4  cur=21  queued=0  
  tx ring  5: qid=5  cur=0   queued=0  
  rx ring: cur=37
  802.11 state 4
umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston DataTraveler G2" rev 2.00/1.10 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler G2, PMAP> SCSI0 0/direct removable serial.09306545B910B32903AB
sd0: 15320MB, 512 bytes/sector, 31375360 sectors
kern.version
Code:
kern.version=OpenBSD 5.1-current (GENERIC.MP) #277: Tue Jun 12 18:40:02 MDT 2012
    todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
( I chose m and i because I had no idea what to manually edit afterwards (ie, default option)

Any help/correction/suggestion/hint is much appreciated
Thank you !
Reply With Quote