Thank you for your answer.
Additional info listed below.
Code:
# sysctl kern.version
kern.version=OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
ISP1 dmesg:
Code:
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 600MHz ("GenuineIntel" 686-class) 601 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,PERF
real mem = 1072230400 (1022MB)
avail mem = 1043726336 (995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/22/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xfb7f0 (45 entries)
bios0: vendor American Megatrends Inc. version "080012" date 12/22/2008
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4670/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xe800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
pci_intr_map: bus 0 dev 28 func 0 pin 3; line 3
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 0 pin 4; line 7
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), apic 1 int 16, address 00:04:a7:05:ab:bc
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci_intr_map: bus 0 dev 28 func 1 pin 3; line 3
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 1 pin 4; line 7
pci_intr_map: no MP mapping found
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), apic 1 int 17, address 00:04:a7:05:ab:bd
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci_intr_map: bus 0 dev 30 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 2; line 3
pci_intr_map: no MP mapping found
pci3 at ppb2 bus 3
rl0 at pci3 dev 2 function 0 "Realtek 8139" rev 0x10: apic 1 int 16, address 00:04:a7:08:af:11
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci3 dev 3 function 0 "Realtek 8139" rev 0x10: apic 1 int 17, address 00:04:a7:08:af:10
rlphy1 at rl1 phy 0: RTL internal PHY
rl2 at pci3 dev 4 function 0 "Realtek 8139" rev 0x10: apic 1 int 18, address 00:04:a7:08:af:0f
rlphy2 at rl2 phy 0: RTL internal PHY
rl3 at pci3 dev 5 function 0 "Realtek 8139" rev 0x10: apic 1 int 19, address 00:04:a7:08:af:0e
rlphy3 at rl3 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <CF>
wd0: 1-sector PIO, LBA, 15279MB, 31293360 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm1 at wbsio0 port 0xa00/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x099a Wireless Keyboard/Mouse" rev 2.00/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "vendor 0x099a Wireless Keyboard/Mouse" rev 2.00/0.02 addr 2
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=7
uhid3 at uhidev1 reportid 5: input=0, output=0, feature=7
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (0687c7d2a1fd2553.a) swap on wd0b dump on wd0b
carp0: state transition (vhid 1): BACKUP -> MASTER
carp0: state transition (vhid 2): BACKUP -> MASTER
carp0: state transition (vhid 2): MASTER -> BACKUP
ISP2 dmesg:
Code:
OpenBSD 5.2 (GENERIC) #278: Wed Aug 1 10:04:16 MDT 2012
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 600MHz ("GenuineIntel" 686-class) 601 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF
real mem = 1064890368 (1015MB)
avail mem = 1036632064 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/22/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xfb7f0 (45 entries)
bios0: vendor American Megatrends Inc. version "080012" date 12/22/2008
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4670/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xe800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
pci_intr_map: bus 0 dev 28 func 0 pin 3; line 3
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 0 pin 4; line 7
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), apic 1 int 16, address 00:04:a7:05:ab:ce
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci_intr_map: bus 0 dev 28 func 1 pin 3; line 3
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 1 pin 4; line 7
pci_intr_map: no MP mapping found
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), apic 1 int 17, address 00:04:a7:05:ab:cf
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci_intr_map: bus 0 dev 30 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 2; line 3
pci_intr_map: no MP mapping found
pci3 at ppb2 bus 3
rl0 at pci3 dev 2 function 0 "Realtek 8139" rev 0x10: apic 1 int 16, address 00:04:a7:08:af:37
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci3 dev 3 function 0 "Realtek 8139" rev 0x10: apic 1 int 17, address 00:04:a7:08:af:36
rlphy1 at rl1 phy 0: RTL internal PHY
rl2 at pci3 dev 4 function 0 "Realtek 8139" rev 0x10: apic 1 int 18, address 00:04:a7:08:af:35
rlphy2 at rl2 phy 0: RTL internal PHY
rl3 at pci3 dev 5 function 0 "Realtek 8139" rev 0x10: apic 1 int 19, address 00:04:a7:08:af:34
rlphy3 at rl3 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <CF>
wd0: 1-sector PIO, LBA, 15279MB, 31293360 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm1 at wbsio0 port 0xa00/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x099a Wireless Keyboard/Mouse" rev 2.00/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "vendor 0x099a Wireless Keyboard/Mouse" rev 2.00/0.02 addr 2
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=7
uhid3 at uhidev1 reportid 5: input=0, output=0, feature=7
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (16b41f08c910d561.a) swap on wd0b dump on wd0b
carp0: state transition (vhid 2): BACKUP -> MASTER
carp0: state transition (vhid 1): BACKUP -> MASTER
carp0: state transition (vhid 1): MASTER -> BACKUP
carp0: state transition (vhid 2): MASTER -> BACKUP
carp0: state transition (vhid 2): BACKUP -> MASTER
carp0: state transition (vhid 1): BACKUP -> MASTER
carp0: state transition (vhid 1): MASTER -> BACKUP
carp0: state transition (vhid 1): BACKUP -> MASTER
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhidev1 detached
carp0: state transition (vhid 1): MASTER -> BACKUP
I've spend a lot of time to find the correct load balancing and failover manners.
That one is the best for me, especially infrastructure depends.
__________________
Arenio
------------
Secure by Default
|